STD
Inlet Plenum? - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Inlet Plenum? (/showthread.php?tid=3457)

Inlet Plenum? - Booster - 03-18-2012

Does any one run a non-standard inlet plenum? This is on om605 or 606?

I have seen one that is supercharged with a custom manifold, but any others out there?

Any pictures would be good!


Thanks



RE: Inlet Plenum? - EDH_Performance - 03-19-2012

(03-18-2012, 05:26 PM)Booster Does any one run a non-standard inlet plenum? This is on om605 or 606?

I have seen one that is supercharged with a custom manifold, but any others out there?

Any pictures would be good!


Thanks
Jeemu has one fine looking intake manifold on his OM605Big Grin Pictures can be found in his 550hp buildWink



RE: Inlet Plenum? - jeemu - 03-20-2012

My intake is made using 606tbo manifold and Finnish aluminium parts manufactor AMW wrc plenum parts.

[Image: full]

[Image: full]

RE: Inlet Plenum? - aaa - 03-20-2012

Pics don't work.

RE: Inlet Plenum? - Booster - 03-20-2012

(03-20-2012, 03:24 PM)jeemu My intake is made using 606tbo manifold and Finnish aluminium parts manufactor AMW wrc plenum parts.

[Image: full]

[Image: full]

I had a look at yours, looks nice.

But are you the only one with a custom plenum?

I would love to see others.


RE: Inlet Plenum? - EDH_Performance - 03-21-2012

(03-20-2012, 04:58 PM)Booster
(03-20-2012, 03:24 PM)jeemu My intake is made using 606tbo manifold and Finnish aluminium parts manufactor AMW wrc plenum parts.

[Image: full]

[Image: full]

I had a look at yours, looks nice.

But are you the only one with a custom plenum?

I would love to see others.

I have oneSmile


RE: Inlet Plenum? - Booster - 03-21-2012

(03-21-2012, 03:23 AM)EDH_Performance
(03-20-2012, 04:58 PM)Booster
(03-20-2012, 03:24 PM)jeemu My intake is made using 606tbo manifold and Finnish aluminium parts manufactor AMW wrc plenum parts.

[Image: full]

[Image: full]

I had a look at yours, looks nice.

But are you the only one with a custom plenum?

I would love to see others.

I have oneSmile

Any pictures?? or link to thread with them in?


Please Big Grin Big Grin

RE: Inlet Plenum? - erling66 - 03-22-2012

Make a "dual plenum intake" search on google and start readingSmile and tell us about your experiences. I am going to build one for my supercharged 606 and will post photos when it is done.

RE: Inlet Plenum? - Booster - 03-22-2012

(03-22-2012, 06:00 AM)erling66 Make a "dual plenum intake" search on google and start readingSmile and tell us about your experiences. I am going to build one for my supercharged 606 and will post photos when it is done.


Seem to bring the power in earlier, as well as a small increase in power up top.... Would be nice. Just not sure my fab skills are up to it!!

Mores to the point, Is there any way of getting the measurements right? or is it just the same as a normal plenum but on split in two?

Can't see its really worth it for me tbh, Would be nice for you try though!!

Any more??


RE: Inlet Plenum? - Savitas - 03-30-2012

[Image: eb38eadef1b0.jpg]

[Image: fdf715797b6f.jpg]

[Image: 0c0ff50ff457.jpg]

[Image: 42a004c2af39.jpg]

This is my made intake manifold for OM606. To be finished just need to clean it and drill a few hole for wastegate and boost gauge connectors.



RE: Inlet Plenum? - m2rkz - 11-22-2012

(03-20-2012, 03:24 PM)jeemu My intake is made using 606tbo manifold and Finnish aluminium parts manufactor AMW wrc plenum parts.

[Image: full]

[Image: full]


Where I can buy this AMW wrc plenum?