+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM617 turbo achievable torque levels? (/showthread.php?tid=5031)
OM617 turbo achievable torque levels? - scout2000 - 10-17-2013
I have spent a lot of time going through the archives, and I have see quite a few similar post indicating that 170-200 hp is possible (depending on who's post you believe) after the typical low hanging fruit, including:
M injector pump from N/A 617 massaged by dieselmeken - $$$$
intercooler
EGR block off
etc.........
It seems from what I have read, the stock torque levels for this engine are around 170 fl-lbs.
For those of you who have actually jumped through these hoops, at least the M IP redone by dieselmeken, what kind of torque figures are you seeing?
Also, when researching this question, I did come across this post which suggest possible torque levels, but nothing solid is provided.
http://www.4btswaps.com/forum/showthread.php?21267-OM617-torque-potential
RE: OM617 turbo achievable torque levels? - Simpler=Better - 10-17-2013
Ask member JTY he has a big pump, head work, and gorgeous manifolds.
RE: OM617 turbo achievable torque levels? - winmutt - 10-21-2013
Potential? At 700NM the crank will go.