STD
w124 estate e300 - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Projects (https://www.superturbodiesel.com/std/forumdisplay.php?fid=14)
+--- Thread: w124 estate e300 (/showthread.php?tid=5889)

w124 estate e300 - jdmonlyb18 - 10-02-2014

hello i have been on here for awhile but never posted anything any way a few days ago i got a w124 e300 estate for breaking but i kind of got attached to it so my plans are 606a super turbo im not an expert so im sorry if i ask a pile of dumb questions

https://imageshack.com/i/p1GsbVxOj
https://imageshack.com/i/kqKR6j1cj

RE: w124 estate e300 - jdmonlyb18 - 01-27-2015

haven't really done much here's some pics this is all fixed now thought i had some pics need to take some

[Image: IMG_0499.jpg]

[Image: IMG_0498.jpg]

[Image: IMG_0493.jpg]

[Image: IMG_0494.jpg]

[Image: IMG_0495.jpg]

[Image: IMG_0496.jpg]

[Image: IMG_0497.jpg]
fitting full gasket set and NA intake cam on the 606a

[Image: IMG_0542.jpg]

[Image: IMG_0543.jpg]

[Image: IMG_0557.jpg]

[Image: IMG_0559.jpg]

[Image: IMG_0562.jpg]

[Image: IMG_0563.jpg]

[Image: IMG_0564.jpg]

[Image: IMG_0565.jpg]

[Image: IMG_0566.jpg]

[Image: IMG_0567.jpg]

[Image: IMG_0577.jpg]

[Image: IMG_0578.jpg]

[Image: IMG_0579.jpg]

[Image: IMG_0580.jpg]

[Image: IMG_0582.jpg]

RE: w124 estate e300 - Mr_Robs - 01-28-2015

Great pics of the teardown! How hard was fitting the NA intake cam? Did you change up the timing or just put it in the stock position? I bet that broken head bolt was frustrating Smile

RE: w124 estate e300 - Ksteen2 - 01-28-2015

did you get a complete gasket kit for it?
with head gasket and such?
I cant find a complete kit for it :o

car looks nice, hope u get some real power out of it Wink

RE: w124 estate e300 - jdmonlyb18 - 01-28-2015

thanks was OK to fit the cam im not really sure if there's much difference in the cams i don't know how to measure them right i just measured the lobe hight with a cheap pair of calipers the NA cam is like 1/2 mm maybe 1mm bigger cant remember lol yeah the broken cam bolt was annoying had the cam nicely timed and fitted then i couldn't find the torque setting found an old book with a 603 torque setting assumed it would be the same obviously not torqued 5 of them before that one broke lol was easy to fix just had to take the cams out again and it came out by hand

(01-28-2015, 04:14 AM)Mr_Robs Great pics of the teardown! How hard was fitting the NA intake cam? Did you change up the timing or just put it in the stock position? I bet that broken head bolt was frustrating Smile
yeah got it on ebay it was a head gasket set and a bottom set the head set was for 606 turbo from the w210 and bottom set was from a w124 e300 606 NA just email him and ask him what your looking for
it didn't have the valve cover gasket and the water pump gasket

http://www.ebay.co.uk/itm/190919274349?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

(01-28-2015, 01:38 PM)Ksteen2 did you get a complete gasket kit for it?
with head gasket and such?
I cant find a complete kit for it :o

car looks nice, hope u get some real power out of it Wink