My 83 300D
My 83 300D
Hello
Here is a little info about my car.
I bought it for 800$ for 6months ago, only thing i needed to change was front brake calipers and handbrake wires.
Things that I have done:
Dropped it 2rings in the front(will drop it in the rear when i get my new rear shocks)
Melber 8x16 et11 rims with 205/55 16
Boost and EGT gauges.
and a little stereo and other smal things.
The engine is a om617 NON turbo with a turbo innlet/exhaust manifold, fitted with a holseth hx40g with exhaust housing 13.
The IP is a standar M pump, that is tuned up max.
Also have a custom built vacuum modulator for harder shifting over 20% throttle. Transmisson is a 722.4
Also have a custom 3" down pipe and 3" exhaust with 1 little rear "silencer"
The car is going to be a "daily driver"(yeah right)
Here is some pics of the car and the engine.
And i little video that show Boost thru 1 2 3 gear.
http://www.youtube.com/watch?v=YaykpYKZxig
max boost is 0.8bar i 1 2 3 gear
Plans:
Just bought a om617 turbo that im going to build up with new internals, h beam rods, regrinded camshaft, double valve spring and ported innlet and exhaust channels in the head.
IP for the new engine is a M with BIGGER elements and another camshaft.
Going to use a 722.4 or some chevy transmisson with the new engine.
Drivetrain is possible gonna be w126 or maybe a chevy rear axel, time will show
But this is my second project, so its not 1priority
This is my 1priority
A 98mod E230 Turbo. Unless the body there is almost nothing oem left on the car, custom aem fuel/ignition controller, c230kompressor engine with all custom internals. T3/4 stage 3, external wastegate, lsd rear axel, and so on
Have used 4 axle shaft this season, here you can see its broken
And here is how i get home with broxen axels
Hope you like this still if its not a diesel
Nice car i like it alot!, did you black out the rear end like that? I painted mine black like that, and i REALLY liked the way it looks, but it was crappy paint so i took it off.
How long have you had the turbo on the N/A engine?
The new camshaft for your IP, is that gonna be a new custom one? or out of another model??
The e230 is gorgeous!
(10-14-2010, 06:50 PM)garage Nice car i like it alot!, did you black out the rear end like that? I painted mine black like that, and i REALLY liked the way it looks, but it was crappy paint so i took it off.I painted the rear black myself, i liked it
How long have you had the turbo on the N/A engine?
The new camshaft for your IP, is that gonna be a new custom one? or out of another model??
The e230 is gorgeous!
(10-14-2010, 06:50 PM)garage Nice car i like it alot!, did you black out the rear end like that? I painted mine black like that, and i REALLY liked the way it looks, but it was crappy paint so i took it off.I painted the rear black myself, i liked it
How long have you had the turbo on the N/A engine?
The new camshaft for your IP, is that gonna be a new custom one? or out of another model??
The e230 is gorgeous!
Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
Thanks
Yez i love the rims
Dont know what IP it came from, and dont rembember what the RS was. But my standar cam has RS108 if i dont remember wrong.
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
(10-15-2010, 10:44 AM)BRABUS Thanks
Yez i love the rims
Dont know what IP it came from, and dont rembember what the RS was. But my standar cam has RS108 if i dont remember wrong.
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
(10-15-2010, 10:44 AM)BRABUS Thanks
Yez i love the rims
Dont know what IP it came from, and dont rembember what the RS was. But my standar cam has RS108 if i dont remember wrong.
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
(10-17-2010, 01:43 PM)garage(10-15-2010, 10:44 AM)BRABUS Thanks
Yez i love the rims
Dont know what IP it came from, and dont rembember what the RS was. But my standar cam has RS108 if i dont remember wrong.
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
Hmm, this new cam increases fuel? Somthing like what myna is doing?
If you can find out where the cam came from that would be way cool!
(10-17-2010, 01:43 PM)garage(10-15-2010, 10:44 AM)BRABUS Thanks
Yez i love the rims
Dont know what IP it came from, and dont rembember what the RS was. But my standar cam has RS108 if i dont remember wrong.
(10-15-2010, 09:20 AM)Biohazard Look at those rims!!! I love those mesh 16's! Both of those cars look nice. What model is the IP cam from? Whats the change from the stock one? Thanks!
Hmm, this new cam increases fuel? Somthing like what myna is doing?
If you can find out where the cam came from that would be way cool!
Still havent heard from the drunk guy that told me about the cam shaft for the IP, but hope to hear from him soon...
Made these today, will use them to make exhaust manifold flanges.
Here is the new turbo engine, got so dirty when i dismantled(?) the engine so didnt take more pics
(11-04-2010, 04:59 PM)BRABUS Here is the new turbo engine, got so dirty when i dismantled(?) the engine so didnt take more pics
(11-04-2010, 04:59 PM)BRABUS Here is the new turbo engine, got so dirty when i dismantled(?) the engine so didnt take more pics
Oh my... this car is tits... This gives me hope that I can run a lil more than 6psi and still have a engine left... It's beautiful! I love champagne metallic, especially with the meashies...
Oooh, sexy engine internals!
Dropnosky, I just use my phone, quality rivals most cameras and it's easier to clean.
I like the exhaust on the 300d!
A little update!
Have received
3.5" exhaust bends for the downpipe
3 sets of v-band clamp kits
Exhaust flanges for the engine
Exhaust bends for the new custom manifold
60mm Wastegate
55mm flexible exhaust pipe Screamer/wastegate outlet
And more to come
Here is a pic of the wastegate. (and the lsd Springblock for my Gasoline Turbo benz)
I smashed my phone in the garage last week, and because of that i dont have more photos to share.
looks great Augu.
Har du fått tak i elementer, når er planen å få gjort det?
(12-22-2010, 04:26 PM)BRABUS(12-22-2010, 04:14 PM)Diesel-Wiking looks great Augu.
Har du fått tak i elementer, når er planen å få gjort det?
Hei
Er fortsatt ikke helt sikker på hvordan det blir med diesel pumpa, blir enten å kjøpe 8mm fra myna eller 7.5 fra tomnik her på forumet.
(12-22-2010, 04:26 PM)BRABUS(12-22-2010, 04:14 PM)Diesel-Wiking looks great Augu.
Har du fått tak i elementer, når er planen å få gjort det?
Hei
Er fortsatt ikke helt sikker på hvordan det blir med diesel pumpa, blir enten å kjøpe 8mm fra myna eller 7.5 fra tomnik her på forumet.
(12-22-2010, 04:38 PM)Diesel-Wiking(12-22-2010, 04:26 PM)BRABUS(12-22-2010, 04:14 PM)Diesel-Wiking looks great Augu.
Har du fått tak i elementer, når er planen å få gjort det?
Hei
Er fortsatt ikke helt sikker på hvordan det blir med diesel pumpa, blir enten å kjøpe 8mm fra myna eller 7.5 fra tomnik her på forumet.
ja, er i samme situasjonen som deg, men for min del haster det ikke.. så da får jeg høre med deg hva slags erfaringer du får
(12-22-2010, 04:38 PM)Diesel-Wiking(12-22-2010, 04:26 PM)BRABUS(12-22-2010, 04:14 PM)Diesel-Wiking looks great Augu.
Har du fått tak i elementer, når er planen å få gjort det?
Hei
Er fortsatt ikke helt sikker på hvordan det blir med diesel pumpa, blir enten å kjøpe 8mm fra myna eller 7.5 fra tomnik her på forumet.
ja, er i samme situasjonen som deg, men for min del haster det ikke.. så da får jeg høre med deg hva slags erfaringer du får
Hei kul et hemmelig nytt språk jeg liker! Google sparker rumpe
I like a challenge! http://translate.google.com/#en|no|
(12-22-2010, 05:41 PM)willbhere4u Hei kul et hemmelig nytt språk jeg liker! Google sparker rumpe
I like a challenge! http://translate.google.com/#en|no|
(12-22-2010, 05:41 PM)willbhere4u Hei kul et hemmelig nytt språk jeg liker! Google sparker rumpe
I like a challenge! http://translate.google.com/#en|no|
Spesielt med Firefox plugin!
Det er rart at min jobb-PC wont la meg se på de fleste bildene, men denne awesome oversetter fungerer helt fint!
(12-23-2010, 10:11 AM)Biohazard Det er rart at min jobb-PC wont la meg se på de fleste bildene, men denne awesome oversetter fungerer helt fint!
(12-23-2010, 10:10 AM)BRABUS(12-23-2010, 12:04 AM)Captain America Spesielt med Firefox plugin!
kult at du forstod alt, kansje jeg og diesel wiking skal skrive på vårt språk fremover da? hehe
(12-23-2010, 10:11 AM)Biohazard Det er rart at min jobb-PC wont la meg se på de fleste bildene, men denne awesome oversetter fungerer helt fint!
(12-23-2010, 10:10 AM)BRABUS(12-23-2010, 12:04 AM)Captain America Spesielt med Firefox plugin!
kult at du forstod alt, kansje jeg og diesel wiking skal skrive på vårt språk fremover da? hehe
(12-23-2010, 05:26 PM)Captain America(12-23-2010, 10:11 AM)Biohazard Det er rart at min jobb-PC wont la meg se på de fleste bildene, men denne awesome oversetter fungerer helt fint!
Samme her ...
(12-23-2010, 10:10 AM)BRABUS(12-23-2010, 12:04 AM)Captain America Spesielt med Firefox plugin!
kult at du forstod alt, kansje jeg og diesel wiking skal skrive på vårt språk fremover da? hehe
Vel det ikke oversetter over akkurat riktig, men det er ikke vanskelig å finne det ut.
Kanskje dette ville være med på å Jeemu? Virker som sine oversettelser er de vanskeligste å forstå ...
(12-23-2010, 05:26 PM)Captain America(12-23-2010, 10:11 AM)Biohazard Det er rart at min jobb-PC wont la meg se på de fleste bildene, men denne awesome oversetter fungerer helt fint!
Samme her ...
(12-23-2010, 10:10 AM)BRABUS(12-23-2010, 12:04 AM)Captain America Spesielt med Firefox plugin!
kult at du forstod alt, kansje jeg og diesel wiking skal skrive på vårt språk fremover da? hehe
Vel det ikke oversetter over akkurat riktig, men det er ikke vanskelig å finne det ut.
Kanskje dette ville være med på å Jeemu? Virker som sine oversettelser er de vanskeligste å forstå ...
I like the exhaust flange! It's great to see a custom header for a for a 617!
Here im testing the flange on the head thats gonna be modified.
Now how it fits with a intake "flange".
Gonna take out the valves and the pre chamber tomorrow and start grinding the in and outlet in the head. And match grind the flange to the new size of the in and outlet´s in the head.
er motoren innvendige fortsatt ikke turbo, eller er det beffed opp ennå? Elsker denne bygge! Hva hestekrefter er det du prøver å oppnå?
(12-28-2010, 04:33 PM)mike-81-240d er motoren innvendige fortsatt ikke turbo, eller er det beffed opp ennå? Elsker denne bygge! Hva hestekrefter er det du prøver å oppnå?
(12-28-2010, 04:33 PM)mike-81-240d er motoren innvendige fortsatt ikke turbo, eller er det beffed opp ennå? Elsker denne bygge! Hva hestekrefter er det du prøver å oppnå?
WOW over 414,000 miles. Looks great. Sounds like a good horsepower gain over stock.
Awesome, I really want to see how the Header turns out.
ser bra ut dette(looks great)
Keep up the good work! I'm contemplating building a header as well, looking forward to seeing how yours goes.
Thanks!
Started with the head today, grinded and smoothed the exhaust channels.
Will polish them tomorrow, and start with the inlet channels.
My header will me pretty easy made, with equal length 20-23" long runners.
But it will work for my goal without a problem.
I wouldn't polish them smooth they flow better being little ruff! think like a golf ball!
If it's polished smooth it hurts the flow!
I use to flow bench race heads and the best one's where about as ruff as 1000 grit sand paper!
Good work we need to get you one of the high flow long runner intake manifolds
Nice! What rpm were you getting boost at with the hx40? I get full boost at 2800 with the hx35.
Don't let forced see... He will tell you that turbo is way too big and all it will do is surge.... Hahaha
I'm looking forward to this.
(01-13-2011, 03:40 PM)dieselboy Nice! What rpm were you getting boost at with the hx40? I get full boost at 2800 with the hx35.
Don't let forced see... He will tell you that turbo is way too big and all it will do is surge.... Hahaha
I'm looking forward to this.
(01-13-2011, 03:40 PM)dieselboy Nice! What rpm were you getting boost at with the hx40? I get full boost at 2800 with the hx35.
Don't let forced see... He will tell you that turbo is way too big and all it will do is surge.... Hahaha
I'm looking forward to this.
(01-13-2011, 03:54 PM)BRABUS(01-13-2011, 03:40 PM)dieselboy Nice! What rpm were you getting boost at with the hx40? I get full boost at 2800 with the hx35.
Don't let forced see... He will tell you that turbo is way too big and all it will do is surge.... Hahaha
I'm looking forward to this.
Hi
I got full boost(10psi) at around 3000rpm in first and second gear, in third and fourth i get 14psi around 3000rpm. But its a non turbo IP, so thats why it slow spooled right now. But i still havent heard the turbo surged
A friend of mine in sweden have a om617 with 8mm IP, hx35, big mofo intercooler and propane injection, he have around 30psi at 3500rpm in first gear, second third and fourth he have 40-42 psi of boost. (oem exhaust manifold)
He is upgrading to an hx40 as we speak, trying to burn all fuel
(01-13-2011, 03:54 PM)BRABUS(01-13-2011, 03:40 PM)dieselboy Nice! What rpm were you getting boost at with the hx40? I get full boost at 2800 with the hx35.
Don't let forced see... He will tell you that turbo is way too big and all it will do is surge.... Hahaha
I'm looking forward to this.
Hi
I got full boost(10psi) at around 3000rpm in first and second gear, in third and fourth i get 14psi around 3000rpm. But its a non turbo IP, so thats why it slow spooled right now. But i still havent heard the turbo surged
A friend of mine in sweden have a om617 with 8mm IP, hx35, big mofo intercooler and propane injection, he have around 30psi at 3500rpm in first gear, second third and fourth he have 40-42 psi of boost. (oem exhaust manifold)
He is upgrading to an hx40 as we speak, trying to burn all fuel
Nice! I'm Pulling the b234 out of the 242 and putting it in the amazon and putting the whiteblock into the 242. I hope to have it in there and running before may.
So what's it cost for you to ship me a headlight setup?...