STD Tuning Engine Information about this Holset Turbo

Information about this Holset Turbo

Information about this Holset Turbo

 
  • 0 Vote(s) - 0 Average
 
GeertDB
Naturally-aspirated

10
12-22-2012, 10:07 AM #1
Hi guys,

For those of you that know far more than I about turbo chargers can anyone tell me more about this turbo ?
I can't find any information about it on the holset website using the Assy nr 3580910 /981807 . Is this a HX35 family turbo as the nr starts with 35 ? Vendor states inlet.7 and outlet 22. and it's used for truck and industry. How much psi can this baby make ? Flowchart ?
Would this turbo make a good candidate for a om603 daily driver ( so fast spoolup )with 350 - 450 hp ?

Any input greatly appreciated.

Thanks,

Geert

   
   
   
GeertDB
12-22-2012, 10:07 AM #1

Hi guys,

For those of you that know far more than I about turbo chargers can anyone tell me more about this turbo ?
I can't find any information about it on the holset website using the Assy nr 3580910 /981807 . Is this a HX35 family turbo as the nr starts with 35 ? Vendor states inlet.7 and outlet 22. and it's used for truck and industry. How much psi can this baby make ? Flowchart ?
Would this turbo make a good candidate for a om603 daily driver ( so fast spoolup )with 350 - 450 hp ?

Any input greatly appreciated.

Thanks,

Geert

   
   
   

mantahead
Holset

600
12-22-2012, 04:45 PM #2
hi,
looks like hx35 with 12cm exhaust housing. Good turbo. I run 3.3bar from 1 of these on the om605Big Grin. i,m guessing 350-400bhp.
mantahead
12-22-2012, 04:45 PM #2

hi,
looks like hx35 with 12cm exhaust housing. Good turbo. I run 3.3bar from 1 of these on the om605Big Grin. i,m guessing 350-400bhp.

300SD_KY
super turbo diesel

121
12-22-2012, 07:10 PM #3
good for a W116 300SD? ...

fwiw, i got monark injectors, rebuilt or replaced just about everything else.
300SD_KY
12-22-2012, 07:10 PM #3

good for a W116 300SD? ...

fwiw, i got monark injectors, rebuilt or replaced just about everything else.

xgroundel
K26-2

25
12-24-2012, 10:49 AM #4
Can I ask about other turbine holset HX40W there, instead of opening another threat. It's on good price and somebody tell me about the capability of power that turbo can blow on om603,605 or 606 engines like single turbo with 8.5 mm superpump elements. Thank you
xgroundel
12-24-2012, 10:49 AM #4

Can I ask about other turbine holset HX40W there, instead of opening another threat. It's on good price and somebody tell me about the capability of power that turbo can blow on om603,605 or 606 engines like single turbo with 8.5 mm superpump elements. Thank you

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)