STD Tuning Engine Very Odd Part -- Help Please from the Euro Gurus

Very Odd Part -- Help Please from the Euro Gurus

Very Odd Part -- Help Please from the Euro Gurus

 
  • 0 Vote(s) - 0 Average
 
Greazzer
Superturbo

1,278
12-24-2012, 10:51 PM #1
W123 Chassis Application / Engine OM617.912 NA 300D

There is a bracket with O-ring / grommit which holds the dip stick tube to the engine block. The one I got (found dangling) on the dip stick tube appears to be not able to bolt to anything. I did, however, remove the PS bracket since I do not need the PS System.

Does anyone out there know if the bracket which holds the dip stick tube to the engine is different when there is NO PS bracket, et cet? The PO opted to not bolt it up anyways when there was a PS bracket, but I am sure there is something different now since there is NO PS bracket.

Right now my dipstick tube is just held in by gravity. A little surprise I found out when I checked the oil for the first time about a month ago or 2 ago, and since the engine is out of the car, I want to get this fixed along with about a dozen or so surprises with this drivetrain.

Thanks !!!

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
12-24-2012, 10:51 PM #1

W123 Chassis Application / Engine OM617.912 NA 300D

There is a bracket with O-ring / grommit which holds the dip stick tube to the engine block. The one I got (found dangling) on the dip stick tube appears to be not able to bolt to anything. I did, however, remove the PS bracket since I do not need the PS System.

Does anyone out there know if the bracket which holds the dip stick tube to the engine is different when there is NO PS bracket, et cet? The PO opted to not bolt it up anyways when there was a PS bracket, but I am sure there is something different now since there is NO PS bracket.

Right now my dipstick tube is just held in by gravity. A little surprise I found out when I checked the oil for the first time about a month ago or 2 ago, and since the engine is out of the car, I want to get this fixed along with about a dozen or so surprises with this drivetrain.

Thanks !!!


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Simpler=Better
PORTED HEAD

2,127
12-25-2012, 12:57 PM #2
Dammit Greazzer read my build thread

http://www.superturbodiesel.com/std/thre...l#pid40411
This post was last modified: 12-25-2012, 12:58 PM by Simpler=Better.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
12-25-2012, 12:57 PM #2

Dammit Greazzer read my build thread

http://www.superturbodiesel.com/std/thre...l#pid40411


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Greazzer
Superturbo

1,278
12-25-2012, 06:40 PM #3
LOL ... You sound like my wife. Is that a long bolt or a jacket of some sorts for the bolt ? Anyways, my car is in Charlotte, N.C. so I will check it out on Saturday. There's nothing to bolt to once I removed the PS aluminum bracket.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
12-25-2012, 06:40 PM #3

LOL ... You sound like my wife. Is that a long bolt or a jacket of some sorts for the bolt ? Anyways, my car is in Charlotte, N.C. so I will check it out on Saturday. There's nothing to bolt to once I removed the PS aluminum bracket.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Simpler=Better
PORTED HEAD

2,127
12-25-2012, 07:19 PM #4
The lowest mount point(on the block) for the PS bracket now accepts the old dipstick holder thingy. The two upper PS mount holes (on the block) fit the fuel filter head.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
12-25-2012, 07:19 PM #4

The lowest mount point(on the block) for the PS bracket now accepts the old dipstick holder thingy. The two upper PS mount holes (on the block) fit the fuel filter head.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Greazzer
Superturbo

1,278
12-25-2012, 07:22 PM #5
I believe your bracket is totally different than what I got. My bracket is about 2" long with a 1/2" tab.

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
12-25-2012, 07:22 PM #5

I believe your bracket is totally different than what I got. My bracket is about 2" long with a 1/2" tab.


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Simpler=Better
PORTED HEAD

2,127
12-25-2012, 07:28 PM #6
Sounds like mine:
[Image: nops2.jpg]
[Image: nops1.jpg]

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
12-25-2012, 07:28 PM #6

Sounds like mine:
[Image: nops2.jpg]
[Image: nops1.jpg]


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)