OM605 200hp..... how
OM605 200hp..... how
It will be an electronically controlled mechanical pump? To get 200 you will have to get it chipped somehow, fit a bigger turbo and get bigger elements installed on the pump. If it really is a fully mechanical pump (must have been changed) then you can skip the chipped part.
Oh and economy and performance don't really go together although if you don't use the extra power economy should not be affected to much.
Then i would fit a Holset he221w with 7cm housing with an adapter to the original turbo manifold and get some bigger elements in the IP.
(06-28-2014, 09:42 AM)mario Thanks edh as is it the exhaust housing you are talking about as is it the inlet and core of the holset I am to use. Do you think 6 mm elements would be enough for the fueling.
(06-28-2014, 09:42 AM)mario Thanks edh as is it the exhaust housing you are talking about as is it the inlet and core of the holset I am to use. Do you think 6 mm elements would be enough for the fueling.
(06-28-2014, 03:50 PM)mario cheers for that as I will look for one of those turbos as are there any other turbos you would recommend there.
(06-28-2014, 03:50 PM)mario cheers for that as I will look for one of those turbos as are there any other turbos you would recommend there.
(06-29-2014, 03:53 AM)mario Looking at the td04 turbos as there are a good few subarus broken here. I take it I am looking at a 15 or 16g one as is 11g too small.
(06-29-2014, 03:53 AM)mario Looking at the td04 turbos as there are a good few subarus broken here. I take it I am looking at a 15 or 16g one as is 11g too small.
(06-29-2014, 04:43 AM)EDH_Performance(06-29-2014, 03:53 AM)mario Looking at the td04 turbos as there are a good few subarus broken here. I take it I am looking at a 15 or 16g one as is 11g too small.
yes a 15/16g should be enough
(06-29-2014, 04:43 AM)EDH_Performance(06-29-2014, 03:53 AM)mario Looking at the td04 turbos as there are a good few subarus broken here. I take it I am looking at a 15 or 16g one as is 11g too small.
yes a 15/16g should be enough
Dieselmeken sells the elements on there own or you can send your pump to him & let him fit, test & tune it for you
http://www.superturbodiesel.com/std/Thre...w-for-sale
They weren't for sale until recently