STD Other FS / WTB / Buying guides FS: om605 and 606 engines complete

FS: om605 and 606 engines complete

FS: om605 and 606 engines complete

 
  • 0 Vote(s) - 0 Average
 
Pages (2): 1 2 Next
hooblah
Holset

401
03-24-2014, 04:48 PM #1
Hey guys due to the abundance of om605 and om606 engines over here, I can provide a service to source and ship an engine to wherever you are in the world. I realise some of you find it difficult to obtain these engines so im willing to help out.
I can also source gearboxes (including 6 speed manuals), clutches, diffs, brakes, etc. If you have any particular requirements then let me know.

Amar
This post was last modified: 03-24-2014, 04:55 PM by hooblah.
hooblah
03-24-2014, 04:48 PM #1

Hey guys due to the abundance of om605 and om606 engines over here, I can provide a service to source and ship an engine to wherever you are in the world. I realise some of you find it difficult to obtain these engines so im willing to help out.
I can also source gearboxes (including 6 speed manuals), clutches, diffs, brakes, etc. If you have any particular requirements then let me know.

Amar

Stevo-trendy
K26-2

41
03-24-2014, 06:00 PM #2
I was thinking of doing the same for engines & gearboxs shipped over via pallets
Stevo-trendy
03-24-2014, 06:00 PM #2

I was thinking of doing the same for engines & gearboxs shipped over via pallets

cho
GT2559V

183
03-25-2014, 10:00 AM #3
I'm interested...

what is the starting (without shipment) price for 605 or 606 with or without tranny? ..... w124 version would be nice Smile

cheers
ChO


.

500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now Smile
----------------------------------------------------------
.
cho
03-25-2014, 10:00 AM #3

I'm interested...

what is the starting (without shipment) price for 605 or 606 with or without tranny? ..... w124 version would be nice Smile

cheers
ChO


.


500SEC euro gen II powered by OM617a stolen from 84 300SD .... with 280se transmission now Smile
----------------------------------------------------------
.

hooblah
Holset

401
03-25-2014, 12:26 PM #4
PM'd.
hooblah
03-25-2014, 12:26 PM #4

PM'd.

Jetmugg
GT2256V

125
03-25-2014, 12:43 PM #5
I have been daydreaming of putting an OM605 and 6-speed combination in my W201 for years. I currently have OM602 turbo / 5 speed combo.

I'm almost afraid to start asking questions about prices, because I realize what a short trip it would be to ownership. Putting my fears aside, I'm interested in finding out the costs.

Thanks,

Steve.
Jetmugg
03-25-2014, 12:43 PM #5

I have been daydreaming of putting an OM605 and 6-speed combination in my W201 for years. I currently have OM602 turbo / 5 speed combo.

I'm almost afraid to start asking questions about prices, because I realize what a short trip it would be to ownership. Putting my fears aside, I'm interested in finding out the costs.

Thanks,

Steve.

hooblah
Holset

401
03-25-2014, 01:04 PM #6
PM'd.
hooblah
03-25-2014, 01:04 PM #6

PM'd.

benzguy300
K26-2

33
03-29-2014, 10:37 PM #7
I would love a OM605 turbo I'm interested in finding out the price
benzguy300
03-29-2014, 10:37 PM #7

I would love a OM605 turbo I'm interested in finding out the price

hooblah
Holset

401
06-07-2014, 03:02 PM #8
Ok for future reference, im going to give you a price of £1500 all in - that includes a 606.962 engine delivered to your door on a pallet to anywhere in the USA.

The price for just an engine is £750. You are welcome to sort out your own courier.

These prices are not set in stone, it depends on what I can find at the time and how quickly you want it. The price will most likely be cheaper but as each case is different I think its best to give you guys the maximum cost you can expect to save from confusion.

Amar
This post was last modified: 06-10-2014, 11:39 AM by hooblah.
hooblah
06-07-2014, 03:02 PM #8

Ok for future reference, im going to give you a price of £1500 all in - that includes a 606.962 engine delivered to your door on a pallet to anywhere in the USA.

The price for just an engine is £750. You are welcome to sort out your own courier.

These prices are not set in stone, it depends on what I can find at the time and how quickly you want it. The price will most likely be cheaper but as each case is different I think its best to give you guys the maximum cost you can expect to save from confusion.

Amar

Grecy
GTA2056V

75
06-15-2014, 12:14 PM #9
(06-07-2014, 03:02 PM)hooblah Ok for future reference, im going to give you a price of £1500 all in - that includes a 606.962 engine delivered to your door on a pallet to anywhere in the USA.
Amar

Thanks very much, I'm sure everyone appreciates you doing this.

Do you have an approximate idea how long delivery would take? A few weeks?

Thanks,
-Dan
Grecy
06-15-2014, 12:14 PM #9

(06-07-2014, 03:02 PM)hooblah Ok for future reference, im going to give you a price of £1500 all in - that includes a 606.962 engine delivered to your door on a pallet to anywhere in the USA.
Amar

Thanks very much, I'm sure everyone appreciates you doing this.

Do you have an approximate idea how long delivery would take? A few weeks?

Thanks,
-Dan

NapaBavarian
GT2256V

119
06-17-2014, 09:27 PM #10
Can you handle BMW M51? Can you get a better rate shipping multiple engines? Any experience with customs? I'd like to make a couple test runs.

I'm interested in a 606 a couple M51s perhaps some landrover engines, modified bmw m51 I think.
NapaBavarian
06-17-2014, 09:27 PM #10

Can you handle BMW M51? Can you get a better rate shipping multiple engines? Any experience with customs? I'd like to make a couple test runs.

I'm interested in a 606 a couple M51s perhaps some landrover engines, modified bmw m51 I think.

hooblah
Holset

401
06-20-2014, 01:46 PM #11
Grecy I have no idea on shipping times or customs charges as noones overseas has taken me up on this yet. I will find out and let you guys know.

NapaBavarian, all those engines are pretty easy to come by, price depends on how quickly you need it and what's available at the time (as with anything).

I've currently got a complete 606.962 with gearbox if anyone wants one? Its done almost 200k but runs peefect. I'm asking for $2000 shipped to your door, or $800 if you want to sort out your own courier.
This post was last modified: 06-20-2014, 01:55 PM by hooblah.
hooblah
06-20-2014, 01:46 PM #11

Grecy I have no idea on shipping times or customs charges as noones overseas has taken me up on this yet. I will find out and let you guys know.

NapaBavarian, all those engines are pretty easy to come by, price depends on how quickly you need it and what's available at the time (as with anything).

I've currently got a complete 606.962 with gearbox if anyone wants one? Its done almost 200k but runs peefect. I'm asking for $2000 shipped to your door, or $800 if you want to sort out your own courier.

hooblah
Holset

401
06-20-2014, 08:01 PM #12
Good news!
I have been informed that the transit time is 1-3 working days. If some of you were wondering why the shipping cost is so high this would be why Wink

And there's even better news!
The price quoted for shipping includes all customs and port charges.

Get it quick before I raise my prices! Big Grin
hooblah
06-20-2014, 08:01 PM #12

Good news!
I have been informed that the transit time is 1-3 working days. If some of you were wondering why the shipping cost is so high this would be why Wink

And there's even better news!
The price quoted for shipping includes all customs and port charges.

Get it quick before I raise my prices! Big Grin

NapaBavarian
GT2256V

119
06-21-2014, 09:20 PM #13
Were you able to get any info on customs? Does your courier have any information?
NapaBavarian
06-21-2014, 09:20 PM #13

Were you able to get any info on customs? Does your courier have any information?

hooblah
Holset

401
06-22-2014, 02:26 PM #14
Engine sold. Still have 2 722.6 gearboxes for £100 each or £175 the pair.

What customs info would you like?
This post was last modified: 06-22-2014, 02:46 PM by hooblah.
hooblah
06-22-2014, 02:26 PM #14

Engine sold. Still have 2 722.6 gearboxes for £100 each or £175 the pair.

What customs info would you like?

NapaBavarian
GT2256V

119
07-28-2014, 09:20 PM #15
Where did the engine go? Buyer feedback?
NapaBavarian
07-28-2014, 09:20 PM #15

Where did the engine go? Buyer feedback?

NapaBavarian
GT2256V

119
08-13-2014, 12:48 PM #16
Hmmmmmmm
NapaBavarian
08-13-2014, 12:48 PM #16

Hmmmmmmm

hooblah
Holset

401
08-14-2014, 12:32 PM #17
It was sold locally Wink
hooblah
08-14-2014, 12:32 PM #17

It was sold locally Wink

Insane190d
GT2256V

170
08-19-2014, 05:16 PM #18
Hello im interested in pricing. Thanks
Insane190d
08-19-2014, 05:16 PM #18

Hello im interested in pricing. Thanks

benzguy
GT2256V

124
08-19-2014, 07:08 PM #19
Look at post number 8 and you are going to find the prices
benzguy
08-19-2014, 07:08 PM #19

Look at post number 8 and you are going to find the prices

Insane190d
GT2256V

170
08-20-2014, 07:51 AM #20
(08-19-2014, 07:08 PM)benzguy Look at post number 8 and you are going to find the prices

Sorry im an idiot. Missed that one
Insane190d
08-20-2014, 07:51 AM #20

(08-19-2014, 07:08 PM)benzguy Look at post number 8 and you are going to find the prices

Sorry im an idiot. Missed that one

NapaBavarian
GT2256V

119
08-22-2014, 10:52 PM #21
Time to get something started...
NapaBavarian
08-22-2014, 10:52 PM #21

Time to get something started...

hooblah
Holset

401
08-26-2014, 04:17 PM #22
Just say the word Wink

On that note, there seems to be a few om648's popping up at reasonable prices. If anyones after one I can have that shipped to your door for around $3500.
hooblah
08-26-2014, 04:17 PM #22

Just say the word Wink

On that note, there seems to be a few om648's popping up at reasonable prices. If anyones after one I can have that shipped to your door for around $3500.

hooblah
Holset

401
08-26-2014, 06:19 PM #23
Just to add, I realise the cost is quite high for shipping and not everybody has that kind of money lying around, so I've been looking into other shipping methods to help you guys out.

If ive done my homework correctly Imay be able to offer you a flat price of $2000. The only catch is that it could take up to a month to arrive and you will need some way of picking up a 250kg (550 lb) pallet from the nearest seaport.

The only problem I'm having is working out any charges (customs, quarantine, handling etc.) on your end. Maybe some of you can help me out here?
hooblah
08-26-2014, 06:19 PM #23

Just to add, I realise the cost is quite high for shipping and not everybody has that kind of money lying around, so I've been looking into other shipping methods to help you guys out.

If ive done my homework correctly Imay be able to offer you a flat price of $2000. The only catch is that it could take up to a month to arrive and you will need some way of picking up a 250kg (550 lb) pallet from the nearest seaport.

The only problem I'm having is working out any charges (customs, quarantine, handling etc.) on your end. Maybe some of you can help me out here?

Grecy
GTA2056V

75
08-26-2014, 06:25 PM #24
(08-26-2014, 06:19 PM)hooblah If ive done my homework correctly Imay be able to offer you a flat price of $2000. The only catch is that it could take up to a month to arrive and you will need some way of picking up a 250kg (550 lb) pallet from the nearest seaport.

At that price, you'd be very competitive with the prices here.
They seem to go for between $2000 and $2500.
If you really keep your eyes out, one comes up for $1500 from time-to-time, but likely not with all accessories.

Do you know if the $2000 price only applies to the Eastern seaboard, or could one be shipped to the west for a similar price?

Thanks,
-Dan
Grecy
08-26-2014, 06:25 PM #24

(08-26-2014, 06:19 PM)hooblah If ive done my homework correctly Imay be able to offer you a flat price of $2000. The only catch is that it could take up to a month to arrive and you will need some way of picking up a 250kg (550 lb) pallet from the nearest seaport.

At that price, you'd be very competitive with the prices here.
They seem to go for between $2000 and $2500.
If you really keep your eyes out, one comes up for $1500 from time-to-time, but likely not with all accessories.

Do you know if the $2000 price only applies to the Eastern seaboard, or could one be shipped to the west for a similar price?

Thanks,
-Dan

hooblah
Holset

401
08-27-2014, 12:56 PM #25
I don't think there's much difference in it, maybe £100 or so. I'm trying to find out the hidden costs at the moment and I've been in touch with a few companies. Just waiting to hear back.
hooblah
08-27-2014, 12:56 PM #25

I don't think there's much difference in it, maybe £100 or so. I'm trying to find out the hidden costs at the moment and I've been in touch with a few companies. Just waiting to hear back.

silverzx
Naturally-aspirated

17
08-29-2014, 03:38 AM #26
PM'd.
silverzx
08-29-2014, 03:38 AM #26

PM'd.

hooblah
Holset

401
08-31-2014, 01:54 PM #27
So ive contacted various agents and shipping companies, some have been helpful, some have not. In essence I have found out that it's not going to be possible to ship engines for much less than the price I have quoted. This is mainly due to customs charges, port charges, clearance etc.

If any of you want a 606 and are willing to deal with the paperwork when it gets to you, then I can supply one for roughly $1600. This will arrive at the seaport/airport of your choosing. Who knows, maybe you can get a better deal at your end.

Amar
hooblah
08-31-2014, 01:54 PM #27

So ive contacted various agents and shipping companies, some have been helpful, some have not. In essence I have found out that it's not going to be possible to ship engines for much less than the price I have quoted. This is mainly due to customs charges, port charges, clearance etc.

If any of you want a 606 and are willing to deal with the paperwork when it gets to you, then I can supply one for roughly $1600. This will arrive at the seaport/airport of your choosing. Who knows, maybe you can get a better deal at your end.

Amar

swampmonkey
hx40 super

280
08-31-2014, 05:33 PM #28
(06-22-2014, 02:26 PM)hooblah Engine sold. Still have 2 722.6 gearboxes for £100 each or £175 the pair.

What customs info would you like?

what would shipping to sweden be for one of those? Smile

---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
swampmonkey
08-31-2014, 05:33 PM #28

(06-22-2014, 02:26 PM)hooblah Engine sold. Still have 2 722.6 gearboxes for £100 each or £175 the pair.

What customs info would you like?

what would shipping to sweden be for one of those? Smile


---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com

hooblah
Holset

401
09-01-2014, 04:04 AM #29
Roughly £70. There won't be any customs charges as its an EU country Smile
hooblah
09-01-2014, 04:04 AM #29

Roughly £70. There won't be any customs charges as its an EU country Smile

wrinkols
Naturally-aspirated

4
09-19-2014, 12:28 PM #30
I'm very interested in this. I need to get an OM605 with 722.6 for a project I'm working on. Could you give me a price and details?
wrinkols
09-19-2014, 12:28 PM #30

I'm very interested in this. I need to get an OM605 with 722.6 for a project I'm working on. Could you give me a price and details?

Jetmugg
GT2256V

125
09-23-2014, 11:32 AM #31
Do you guys ever encounter the 2-liter version(s) of the OM604? I think the correct designation #'s are OM604.915 and/or OM604.917

Steve
Jetmugg
09-23-2014, 11:32 AM #31

Do you guys ever encounter the 2-liter version(s) of the OM604? I think the correct designation #'s are OM604.915 and/or OM604.917

Steve

hooblah
Holset

401
09-23-2014, 04:23 PM #32
Yes we do but they're a bit rarer.
hooblah
09-23-2014, 04:23 PM #32

Yes we do but they're a bit rarer.

Jetmugg
GT2256V

125
09-23-2014, 04:30 PM #33
That is the one I'm looking for - the 2 liter OM604, not the "regular" 2.2 liter OM604. If you can find one of those, count me IN!

Steve.
Jetmugg
09-23-2014, 04:30 PM #33

That is the one I'm looking for - the 2 liter OM604, not the "regular" 2.2 liter OM604. If you can find one of those, count me IN!

Steve.

hooblah
Holset

401
09-24-2014, 04:45 AM #34
Those are non-turbo, right?
hooblah
09-24-2014, 04:45 AM #34

Those are non-turbo, right?

Jetmugg
GT2256V

125
09-24-2014, 07:12 AM #35
Correct.

I don't think there were any turbo versions of the 2 liter OM604. Based on my limited knowledge, the correct code#'s for those engines would be OM604.915 or OM604.917. Those are the only numbers I could find online, anyway.

Steve.
Jetmugg
09-24-2014, 07:12 AM #35

Correct.

I don't think there were any turbo versions of the 2 liter OM604. Based on my limited knowledge, the correct code#'s for those engines would be OM604.915 or OM604.917. Those are the only numbers I could find online, anyway.

Steve.

Petar
7.5mm M pump

459
09-24-2014, 07:29 AM #36
Yes, OM604 engines never came with a turbo.
Petar
09-24-2014, 07:29 AM #36

Yes, OM604 engines never came with a turbo.

hooblah
Holset

401
09-24-2014, 01:55 PM #37
As far as I can tell they came in a few w202's. I don't know how many variations they made but I'll try and find what you're after.
This post was last modified: 09-24-2014, 01:56 PM by hooblah.
hooblah
09-24-2014, 01:55 PM #37

As far as I can tell they came in a few w202's. I don't know how many variations they made but I'll try and find what you're after.

Jetmugg
GT2256V

125
09-24-2014, 02:27 PM #38
Thank you very much. As far as I can tell, as you stated, they were available in W202's for the "Export" market, which seems to imply Portugal, Greece, Hungary, etc. (not Germany or the UK).

Steve.
Jetmugg
09-24-2014, 02:27 PM #38

Thank you very much. As far as I can tell, as you stated, they were available in W202's for the "Export" market, which seems to imply Portugal, Greece, Hungary, etc. (not Germany or the UK).

Steve.

TurboTim
Holset

457
10-12-2014, 12:54 AM #39
I am looking for a OM606 can you help me find a turbo one. I am ready to purchase.

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
10-12-2014, 12:54 AM #39

I am looking for a OM606 can you help me find a turbo one. I am ready to purchase.


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

hooblah
Holset

401
10-12-2014, 07:28 AM #40
(10-12-2014, 12:54 AM)TurboTim I am looking for a OM606 can you help me find a turbo one. I am ready to purchase.

Yes certainly. You have a pm.
hooblah
10-12-2014, 07:28 AM #40

(10-12-2014, 12:54 AM)TurboTim I am looking for a OM606 can you help me find a turbo one. I am ready to purchase.

Yes certainly. You have a pm.

jordon001
Naturally-aspirated

21
12-10-2014, 09:26 PM #41
I need the om606 turbo downpipe. The piece that connects to turbo and clamp. And oil lines for turbo.
jordon001
12-10-2014, 09:26 PM #41

I need the om606 turbo downpipe. The piece that connects to turbo and clamp. And oil lines for turbo.

Eric78
GT2559V

198
12-11-2014, 03:53 AM #42
Would you be able to source me a 722.6 bellhousing(yeah I know K1 clutch drum & one of the planetary stacks is part of it) to mount a 722.636 to my OM605?
Eric78
12-11-2014, 03:53 AM #42

Would you be able to source me a 722.6 bellhousing(yeah I know K1 clutch drum & one of the planetary stacks is part of it) to mount a 722.636 to my OM605?

hooblah
Holset

401
12-11-2014, 03:41 PM #43
PM'd both of you.
hooblah
12-11-2014, 03:41 PM #43

PM'd both of you.

Mr_Robs
GT2256V

124
12-11-2014, 04:58 PM #44
I noticed a couple people looking here for parts vs a complete engine. I have an OM606.610 and im looking for OM606.962 connecting rods and pistons. Let me know if you can/want to sell these parts seperately. I've found a couple complete engines in the USA but they are expensive, and I really only have use for the rods/pistons going into my original block.

Cheers
Mr_Robs
12-11-2014, 04:58 PM #44

I noticed a couple people looking here for parts vs a complete engine. I have an OM606.610 and im looking for OM606.962 connecting rods and pistons. Let me know if you can/want to sell these parts seperately. I've found a couple complete engines in the USA but they are expensive, and I really only have use for the rods/pistons going into my original block.

Cheers

hooblah
Holset

401
12-11-2014, 06:46 PM #45
I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.
hooblah
12-11-2014, 06:46 PM #45

I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.

Mr_Robs
GT2256V

124
12-11-2014, 09:17 PM #46
(12-11-2014, 06:46 PM)hooblah I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.

I was told that the OM606.910 does have oil squirters, all NA 604, 605, and 606 came with them. Otherwise yes i definitely would have gone for a full short block. It will be nice to have the more aggresive NA intake cam.
Mr_Robs
12-11-2014, 09:17 PM #46

(12-11-2014, 06:46 PM)hooblah I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.

I was told that the OM606.910 does have oil squirters, all NA 604, 605, and 606 came with them. Otherwise yes i definitely would have gone for a full short block. It will be nice to have the more aggresive NA intake cam.

95e300dez
95E300td

89
12-18-2014, 12:49 AM #47
This statement isn't completely correct. The .910 which I have also has squirters but they are different from the .962 in that they bolt in not press in. I swapped over to the better pistons and rods from a .962 and used the stock .910 squirters. I bought my short block for 500 and shipping sold the block for 100 and still have a spare head to sell or use in the future.
(12-11-2014, 06:46 PM)hooblah I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.
95e300dez
12-18-2014, 12:49 AM #47

This statement isn't completely correct. The .910 which I have also has squirters but they are different from the .962 in that they bolt in not press in. I swapped over to the better pistons and rods from a .962 and used the stock .910 squirters. I bought my short block for 500 and shipping sold the block for 100 and still have a spare head to sell or use in the future.

(12-11-2014, 06:46 PM)hooblah I can supply these bits no problem. I would however recommend having a complete bottom end so you also have the oil squirters, which the 610 doesn't come with. But its up to you.

hooblah
Holset

401
12-18-2014, 12:53 PM #48
OK thanks for clearing that up, i've only been going by what ive read on here Wink
hooblah
12-18-2014, 12:53 PM #48

OK thanks for clearing that up, i've only been going by what ive read on here Wink

Booster
GT2559V

240
01-16-2015, 03:39 AM #49
I looked into doing this, as I wanted a good supply of LSx v8s as a back load to sell in the uk.

Cheapest way to do it was 10 engine plus gearbox combos packed in a shared container.

It's really not an easy thing to organise by the single unit, customs don't like oily old engines. They need to be completely clean without any oil or fuel spillages or leaks.

I needed someone in the us willing to swap 10 om60x engine and gearboxes with 10 lsx engines etc to make it worth the effort!
Booster
01-16-2015, 03:39 AM #49

I looked into doing this, as I wanted a good supply of LSx v8s as a back load to sell in the uk.

Cheapest way to do it was 10 engine plus gearbox combos packed in a shared container.

It's really not an easy thing to organise by the single unit, customs don't like oily old engines. They need to be completely clean without any oil or fuel spillages or leaks.

I needed someone in the us willing to swap 10 om60x engine and gearboxes with 10 lsx engines etc to make it worth the effort!

TurboTim
Holset

457
01-16-2015, 07:25 AM #50
Any sizes or what are you looking for? I have a good start at my shop.

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
01-16-2015, 07:25 AM #50

Any sizes or what are you looking for? I have a good start at my shop.


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

Pages (2): 1 2 Next
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)