Max safe boost from a hx40super?
Max safe boost from a hx40super?
Currently at 2.5 bar and it's running like a dream.
Cheers,
Max
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
05-18-2015, 12:54 PM #1Does anyone know what is the maximum safe boost I car run a hx40super at?
Currently at 2.5 bar and it's running like a dream.
Cheers,
Max
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
As much as possible.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
(05-20-2015, 09:51 PM)MFSuper90 3.5 to 4 bar should be fine with a hx40 super. If the engine can handle it
To boost 4 bar the turbo needs to operate at a pressure ration of 5, I have seen few turbo that is in compressor map at that pressure ratio and the operating range within that pressure ratio is very limited in my experience, but of course if you want to try you luck...
(05-20-2015, 09:51 PM)MFSuper90 3.5 to 4 bar should be fine with a hx40 super. If the engine can handle it
To boost 4 bar the turbo needs to operate at a pressure ration of 5, I have seen few turbo that is in compressor map at that pressure ratio and the operating range within that pressure ratio is very limited in my experience, but of course if you want to try you luck...
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
I know it's not within the map, but I know that people push hx40s to that pressure daily and they handle it fine. Is it ideal? Most likely not, but it can be done.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
Some things are possible but less desirable, if you want to make hot air it is an excellent choice, I really wonder how much you gain, if any, in compare to choose a turbo that is in say 70% within entropic efficiency or go serie set up, at higher pressure ratio isentropic efficiency falls of real fast, specially if you introduce intercooler between stages, and by the work required goes done as well
1 Guest(s)
1 Guest(s)