8mm elements
8mm elements
12-30-2008, 06:18 PM
#1
1418415049 is the Bosch part number for the element for the Bosch part number PES6MW280/720RS1015 injection pump.
I found a place in Turkey that has them but I do not speak Turkish. I am going to speak with my cousin and see if he can help me track them down in EU if I have no further luck here.
This post was last modified: 12-31-2008, 12:14 AM by winmutt.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
They are out there, I have been in touch with Bosch NA and the SE IVECO rep trying to get the IVECO partnumber for these.
1418415049 is the Bosch part number for the element for the Bosch part number PES6MW280/720RS1015 injection pump.
I found a place in Turkey that has them but I do not speak Turkish. I am going to speak with my cousin and see if he can help me track them down in EU if I have no further luck here.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
12-31-2008, 07:26 AM
#2
I think the number is wrong.
8 mm elements should be:
1 418 415 058 PES6MW80 ...
If you are really interested in 8 mm elements I can check the price and availability here in Germany (or even Europe) for you.
Bosch or after market?
The 8 mm MW element is 251 EUR a piece in BOSCH (GERMANY)
Tom
(12-30-2008, 06:18 PM)winmutt They are out there, I have been in touch with Bosch NA and the SE IVECO rep trying to get the IVECO partnumber for these.
1418415049 is the Bosch part number for the element for the Bosch part number PES6MW280/720RS1015 injection pump.
I found a place in Turkey that has them but I do not speak Turkish. I am going to speak with my cousin and see if he can help me track them down in EU if I have no further luck here.
This post was last modified: 12-31-2008, 07:29 AM by tomnik.
Hi,
I think the number is wrong.
8 mm elements should be:
1 418 415 058 PES6MW80 ...
If you are really interested in 8 mm elements I can check the price and availability here in Germany (or even Europe) for you.
Bosch or after market?
The 8 mm MW element is 251 EUR a piece in BOSCH (GERMANY)
Tom
(12-30-2008, 06:18 PM)winmutt They are out there, I have been in touch with Bosch NA and the SE IVECO rep trying to get the IVECO partnumber for these.
1418415049 is the Bosch part number for the element for the Bosch part number PES6MW280/720RS1015 injection pump.
I found a place in Turkey that has them but I do not speak Turkish. I am going to speak with my cousin and see if he can help me track them down in EU if I have no further luck here.
12-31-2008, 01:39 PM
#3
Talk to these ppl: http://www.ak-say.com.tr/arakategori.asp...fset=12180
Conversion was $90 roughly IF that is Turkish Lira and not euros. I can't find a translator for turkish to english that does whole websites.
This was another one I found :
418 415 094 PES6MW80/720RS1164
Both are listed on that site.
IIRC Bosch NA said the 049 WAS 8mm as well. Since it was for Iveco and others I figured it was easier to find.
PLEASE let us know what happens.
I assumed 280 did not mean 28mm. That would be insane. It was the one that was commonly found.
Talk to these ppl: http://www.ak-say.com.tr/arakategori.asp...fset=12180
Conversion was $90 roughly IF that is Turkish Lira and not euros. I can't find a translator for turkish to english that does whole websites.
This was another one I found :
418 415 094 PES6MW80/720RS1164
Both are listed on that site.
IIRC Bosch NA said the 049 WAS 8mm as well. Since it was for Iveco and others I figured it was easier to find.
PLEASE let us know what happens.
01-02-2009, 06:21 PM
#4
I emailed these guys as well.
http://www.who-sells-it.com/cy/rueck-koe...-pump.html
I emailed these guys as well.
01-02-2009, 07:28 PM
#5
(01-02-2009, 06:21 PM)winmutt http://www.who-sells-it.com/cy/rueck-koe...-pump.html
I emailed these guys as well.
I will give them a call on Monday. Tuesday is bank holiday over here, so they might be back only Wednesday.
I will let you know.
Tom
(01-02-2009, 06:21 PM)winmutt http://www.who-sells-it.com/cy/rueck-koe...-pump.html
I emailed these guys as well.
I will give them a call on Monday. Tuesday is bank holiday over here, so they might be back only Wednesday.
I will let you know.
Tom
01-05-2009, 03:27 AM
#6
(12-31-2008, 01:39 PM)winmutt Conversion was $90 roughly IF that is Turkish Lira and not euros.
Looking at this http://www.ak-say.com.tr/dovizkurlari.asp?offset=10
I think it is indicated in EURO, have a closer look to the € (euro symbol).
Tom
(12-31-2008, 01:39 PM)winmutt Conversion was $90 roughly IF that is Turkish Lira and not euros.
Looking at this http://www.ak-say.com.tr/dovizkurlari.asp?offset=10
I think it is indicated in EURO, have a closer look to the € (euro symbol).
Tom
01-06-2009, 04:39 AM
#8
(01-05-2009, 11:24 AM)winmutt That is not cheap. Is there any way you can try to track down the FIAT/Iveco number?
Tomorrow I will jump to IVECO here in town and ask. (I have to see them anyway, there is a nice turbo on their 3,0 HDi trucks).
The 8 mm elements are not listed at rück-köhler, but I hope to get them on the phone tomorrow.
Tom
(01-05-2009, 11:24 AM)winmutt That is not cheap. Is there any way you can try to track down the FIAT/Iveco number?
Tomorrow I will jump to IVECO here in town and ask. (I have to see them anyway, there is a nice turbo on their 3,0 HDi trucks).
The 8 mm elements are not listed at rück-köhler, but I hope to get them on the phone tomorrow.
Tom
01-07-2009, 12:57 PM
#10
(01-06-2009, 10:33 AM)winmutt Tom,
Thanks for the leg work, 130 euro is not so bad really. I doubt we could get it cheaper here locally but who knows?
-Rolf
Hi Rolf,
Hi Sam,
IVECO can't find their number.
BUT after some phone calls I found at my supplier for my other MW stuff
the 1 418 415 058 for Renault.
The bad news: I have to take at least 25 pieces...
The good news: the price is 82 EUR/piece!!!! (+shipping).
(available within some days)
The other company r+k is still in Christmas-sleep.
I still believe the 8 mm are too large for me. If you can find 5 people, I will organise the parts. (but only if the first who have them installed let us know how the car idles and drives).
Tom
(01-06-2009, 10:33 AM)winmutt Tom,
Thanks for the leg work, 130 euro is not so bad really. I doubt we could get it cheaper here locally but who knows?
-Rolf
Hi Rolf,
Hi Sam,
IVECO can't find their number.
BUT after some phone calls I found at my supplier for my other MW stuff
the 1 418 415 058 for Renault.
The bad news: I have to take at least 25 pieces...
The good news: the price is 82 EUR/piece!!!! (+shipping).
(available within some days)
The other company r+k is still in Christmas-sleep.
I still believe the 8 mm are too large for me. If you can find 5 people, I will organise the parts. (but only if the first who have them installed let us know how the car idles and drives).
Tom
01-08-2009, 03:57 AM
#12
(01-07-2009, 12:57 PM)tomnikHi Tom.(01-06-2009, 10:33 AM)winmutt Tom,
Thanks for the leg work, 130 euro is not so bad really. I doubt we could get it cheaper here locally but who knows?
-Rolf
Hi Rolf,
Hi Sam,
IVECO can't find their number.
BUT after some phone calls I found at my supplier for my other MW stuff
the 1 418 415 058 for Renault.
The bad news: I have to take at least 25 pieces...
The good news: the price is 82 EUR/piece!!!! (+shipping).
(available within some days)
The other company r+k is still in Christmas-sleep.
I still believe the 8 mm are too large for me. If you can find 5 people, I will organise the parts. (but only if the first who have them installed let us know how the car idles and drives).
Tom
Ive been looking through the above numbers of elements and injectionpump numbers. For example PESMW80/720RS1164, the last for didgits are 1000 something, and thats a 1000 series pump, and these elements wont fit (my engine 617.952)because the 1000 series pump have a diffrent cam lift compare to my pump PES5MW55/320RS16. 16 stands for (0-100) the hundred pump series. And a 1000 series pump does not fit the 617.952 engine. I had a long chat with my diesel-mecanic about this. The elements I use (10mm) is from a 6 liter Volvo lorry, these elements does not have that "cut" on the top of the elements, the "cut" change the igintion to get the engine run smoother on idle. We will meet up in end of Januari the change pump on my engine. Hopfully this time the engine will work nicely.
Maybe you guys already now this?
But please check with your engines and pumps and check the serienumber on the pump.
/Sam
This post was last modified: 01-08-2009, 09:47 AM by winmutt.
Attached Files
Image(s)(01-07-2009, 12:57 PM)tomnikHi Tom.(01-06-2009, 10:33 AM)winmutt Tom,
Thanks for the leg work, 130 euro is not so bad really. I doubt we could get it cheaper here locally but who knows?
-Rolf
Hi Rolf,
Hi Sam,
IVECO can't find their number.
BUT after some phone calls I found at my supplier for my other MW stuff
the 1 418 415 058 for Renault.
The bad news: I have to take at least 25 pieces...
The good news: the price is 82 EUR/piece!!!! (+shipping).
(available within some days)
The other company r+k is still in Christmas-sleep.
I still believe the 8 mm are too large for me. If you can find 5 people, I will organise the parts. (but only if the first who have them installed let us know how the car idles and drives).
Tom
Ive been looking through the above numbers of elements and injectionpump numbers. For example PESMW80/720RS1164, the last for didgits are 1000 something, and thats a 1000 series pump, and these elements wont fit (my engine 617.952)because the 1000 series pump have a diffrent cam lift compare to my pump PES5MW55/320RS16. 16 stands for (0-100) the hundred pump series. And a 1000 series pump does not fit the 617.952 engine. I had a long chat with my diesel-mecanic about this. The elements I use (10mm) is from a 6 liter Volvo lorry, these elements does not have that "cut" on the top of the elements, the "cut" change the igintion to get the engine run smoother on idle. We will meet up in end of Januari the change pump on my engine. Hopfully this time the engine will work nicely.
Maybe you guys already now this?
But please check with your engines and pumps and check the serienumber on the pump.
/Sam
Attached Files
Image(s)
01-10-2009, 12:51 AM
#14
(01-08-2009, 09:49 AM)winmutt Interesting. This may be as well what I read regarding 8mm vs 10mm lift on another forum.
Sam, can you find out what the lift is for which one. You can always grind the cam.
If there is a minimum for these I'm in for a set.
Lincolnlock
01-10-2009, 12:51 AM #14(01-08-2009, 09:49 AM)winmutt Interesting. This may be as well what I read regarding 8mm vs 10mm lift on another forum.
Sam, can you find out what the lift is for which one. You can always grind the cam.
If there is a minimum for these I'm in for a set.
01-11-2009, 04:27 AM
#15
(01-08-2009, 03:57 AM)sweden Ive been looking through the above numbers of elements and injectionpump numbers. For example PESMW80/720RS1164, the last for didgits are 1000 something, and thats a 1000 series pump, and these elements wont fit (my engine 617.952)because the 1000 series pump have a diffrent cam lift compare to my pump PES5MW55/320RS16. 16 stands for (0-100) the hundred pump series. And a 1000 series pump does not fit the 617.952 engine.
Correct, what you say about cam lift.
Somewhere else I stated that the cam lift must be the same to swap elements, but now I know better, sorry for that.
But the elements ARE interchangeable. I have 5.5 and 10 mm elements on my table and the geometry is the same. Also distance from feeding bore to the top of the barrel (stroke of the plunger from just closing the bore to TDC). But the bore is larger on the 10 mm, therefore the plunger must do an increased down stroke to completely open the bore.
Anyway, with the adjustment of the vertical position of the barrel the 8 mm elements (originally for 10 mm cam lift) will work in the "small" IPs (8 mm cam lift).
From the theoretical effective stroke only a part is used, + the "over stroke" for opening the feeding bore.
Again, 8 mm elements can be used for the 617.
(01-08-2009, 03:57 AM)sweden I had a long chat with my diesel-mecanic about this. The elements I use (10mm) is from a 6 liter Volvo lorry, these elements does not have that "cut" on the top of the elements, the "cut" change the igintion to get the engine run smoother on idle.
The cut is called "retard delivery edge" and it is not necessary any more today. Originally it was for reducing nailing at idle, but with today's nozzles you don't need it any more. Advised by specialists I did my 6 mm elements without that edge without any issues.
Tom
(01-08-2009, 03:57 AM)sweden Ive been looking through the above numbers of elements and injectionpump numbers. For example PESMW80/720RS1164, the last for didgits are 1000 something, and thats a 1000 series pump, and these elements wont fit (my engine 617.952)because the 1000 series pump have a diffrent cam lift compare to my pump PES5MW55/320RS16. 16 stands for (0-100) the hundred pump series. And a 1000 series pump does not fit the 617.952 engine.
Correct, what you say about cam lift.
Somewhere else I stated that the cam lift must be the same to swap elements, but now I know better, sorry for that.
But the elements ARE interchangeable. I have 5.5 and 10 mm elements on my table and the geometry is the same. Also distance from feeding bore to the top of the barrel (stroke of the plunger from just closing the bore to TDC). But the bore is larger on the 10 mm, therefore the plunger must do an increased down stroke to completely open the bore.
Anyway, with the adjustment of the vertical position of the barrel the 8 mm elements (originally for 10 mm cam lift) will work in the "small" IPs (8 mm cam lift).
From the theoretical effective stroke only a part is used, + the "over stroke" for opening the feeding bore.
Again, 8 mm elements can be used for the 617.
(01-08-2009, 03:57 AM)sweden I had a long chat with my diesel-mecanic about this. The elements I use (10mm) is from a 6 liter Volvo lorry, these elements does not have that "cut" on the top of the elements, the "cut" change the igintion to get the engine run smoother on idle.
The cut is called "retard delivery edge" and it is not necessary any more today. Originally it was for reducing nailing at idle, but with today's nozzles you don't need it any more. Advised by specialists I did my 6 mm elements without that edge without any issues.
Tom
01-12-2009, 11:53 AM
#17
(01-12-2009, 10:24 AM)winmutt Tomnik, are you going to be willing to handle this as a group buy? I think I am in for a set as well.
Yes,
I am on a business trip right now until mid of this week, then I try to get an old element or a single sample to verify the plunger for the 8 mm cam lift.
Meanwhile try to get "hard orders" from altogether 5 persons.
Depending on where these people are located I might be able to ship the parts to one of them as kind of handluggage.
Tom
(01-12-2009, 10:24 AM)winmutt Tomnik, are you going to be willing to handle this as a group buy? I think I am in for a set as well.
Yes,
I am on a business trip right now until mid of this week, then I try to get an old element or a single sample to verify the plunger for the 8 mm cam lift.
Meanwhile try to get "hard orders" from altogether 5 persons.
Depending on where these people are located I might be able to ship the parts to one of them as kind of handluggage.
Tom
01-13-2009, 01:50 AM
#20
(01-13-2009, 12:59 AM)bgkast So what is the cost in USD, and when would we have to pay?
I would be more interested in a group buy for 6 or 6.5 MM elements.
You mean MW?
I have 2 sets of 6 mm MW right now. (75 EUR/each)
6.5mm are in progress (maybe April).
Group buy for the custom made is not possible within these quantities.
For the 8 mm after market it is just the minimum order quantity (25 pieces).
Tom
(01-13-2009, 12:59 AM)bgkast So what is the cost in USD, and when would we have to pay?
I would be more interested in a group buy for 6 or 6.5 MM elements.
You mean MW?
I have 2 sets of 6 mm MW right now. (75 EUR/each)
6.5mm are in progress (maybe April).
Group buy for the custom made is not possible within these quantities.
For the 8 mm after market it is just the minimum order quantity (25 pieces).
Tom
01-13-2009, 10:13 AM
#21
(01-13-2009, 01:50 AM)tomnik(01-13-2009, 12:59 AM)bgkast So what is the cost in USD, and when would we have to pay?
I would be more interested in a group buy for 6 or 6.5 MM elements.
You mean MW?
I have 2 sets of 6 mm MW right now. (75 EUR/each)
6.5mm are in progress (maybe April).
Group buy for the custom made is not possible within these quantities.
For the 8 mm after market it is just the minimum order quantity (25 pieces).
Tom
But you only have the plungers right? The holder still has to be bored out?
With the 8mm the only uncertainty is the cam height, if it is different, by how much. Can you not call Bosch Europe and get the specs from them?
This post was last modified: 01-13-2009, 10:37 AM by winmutt.
(01-13-2009, 01:50 AM)tomnik(01-13-2009, 12:59 AM)bgkast So what is the cost in USD, and when would we have to pay?
I would be more interested in a group buy for 6 or 6.5 MM elements.
You mean MW?
I have 2 sets of 6 mm MW right now. (75 EUR/each)
6.5mm are in progress (maybe April).
Group buy for the custom made is not possible within these quantities.
For the 8 mm after market it is just the minimum order quantity (25 pieces).
Tom
But you only have the plungers right? The holder still has to be bored out?
With the 8mm the only uncertainty is the cam height, if it is different, by how much. Can you not call Bosch Europe and get the specs from them?
01-13-2009, 01:09 PM
#22
(01-13-2009, 10:13 AM)winmutt But you only have the plungers right? The holder still has to be bored out?
With the 8mm the only uncertainty is the cam height, if it is different, by how much. Can you not call Bosch Europe and get the specs from them?
No, plunger and barrel (element).
The cam lift for original purpose of 8 mm MW element is 10 mm.
Ours is 8mm cam lift, but the barrel is the same (except the bore of course).
I have a MW 100 and our MW 55 on the table and these are interchangeable.
So the MW 80 should be similar to the MW 100.
As said before I have to check the plunger of the MW 80 to be sure that these can be used in our (8 mm cam lift) IPs.
Asking Bosch such things impossible. They won't tell you the actual time as a private person.
Tom
(01-13-2009, 10:13 AM)winmutt But you only have the plungers right? The holder still has to be bored out?
With the 8mm the only uncertainty is the cam height, if it is different, by how much. Can you not call Bosch Europe and get the specs from them?
No, plunger and barrel (element).
The cam lift for original purpose of 8 mm MW element is 10 mm.
Ours is 8mm cam lift, but the barrel is the same (except the bore of course).
I have a MW 100 and our MW 55 on the table and these are interchangeable.
So the MW 80 should be similar to the MW 100.
As said before I have to check the plunger of the MW 80 to be sure that these can be used in our (8 mm cam lift) IPs.
Asking Bosch such things impossible. They won't tell you the actual time as a private person.
Tom
01-13-2009, 01:18 PM
#23
(01-13-2009, 01:09 PM)tomnik No, plunger and barrel (element).
The cam lift for original purpose of 8 mm MW element is 10 mm.
Ours is 8mm cam lift, but the barrel is the same (except the bore of course).
I have a MW 100 and our MW 55 on the table and these are interchangeable.
So the MW 80 should be similar to the MW 100.
As said before I have to check the plunger of the MW 80 to be sure that these can be used in our (8 mm cam lift) IPs.
Asking Bosch such things impossible. They won't tell you the actual time as a private person.
Tom
Bosch NA was pretty helpful to me, are you sure there is no one you can call? This is affecting length of stroke not just the offset correct? The base is the same in both cranks (meaning we can't just take 2mm off the bottom or so)?
It is starting to sound like more and more like you are the only viable alternative.
This post was last modified: 01-13-2009, 01:21 PM by winmutt.
(01-13-2009, 01:09 PM)tomnik No, plunger and barrel (element).
The cam lift for original purpose of 8 mm MW element is 10 mm.
Ours is 8mm cam lift, but the barrel is the same (except the bore of course).
I have a MW 100 and our MW 55 on the table and these are interchangeable.
So the MW 80 should be similar to the MW 100.
As said before I have to check the plunger of the MW 80 to be sure that these can be used in our (8 mm cam lift) IPs.
Asking Bosch such things impossible. They won't tell you the actual time as a private person.
Tom
Bosch NA was pretty helpful to me, are you sure there is no one you can call? This is affecting length of stroke not just the offset correct? The base is the same in both cranks (meaning we can't just take 2mm off the bottom or so)?
It is starting to sound like more and more like you are the only viable alternative.
01-14-2009, 08:14 PM
#24
Working on a cali intake to clear the larger compressor housing.
Thanks in advance!
leadphinger
01-14-2009, 08:14 PM #24Granted...I'm a new guy but I've got high hopes for my 300k plus mile uberwagon. Count me in for a set of 8's assuming they're plug and play. I'm thinking the extra fuel will be necessary with the garrett t4/t3 I purchased.
Working on a cali intake to clear the larger compressor housing.
Thanks in advance!
01-15-2009, 12:11 AM
#25
http://www.chinahanji.com/MW%20PUMP-Element.asp
Section106
01-15-2009, 12:11 AM #25I emailed a chinese factory and they have the 1 418 415 058 element for $13 USD w/ a minimum of 30 for a sample order. It might be worthwhile for someone to look into that. I would but I don't have an extra 400 bucks laying around.
http://www.chinahanji.com/MW%20PUMP-Element.asp
01-15-2009, 12:43 AM
#26
(01-15-2009, 12:11 AM)Section106 I emailed a chinese factory and they have the 1 418 415 058 element for $13 USD w/ a minimum of 30 for a sample order. It might be worthwhile for someone to look into that. I would but I don't have an extra 400 bucks laying around.
http://www.chinahanji.com/MW%20PUMP-Element.asp
That's only $65 per person for 6 guys to be guinea pigs. I'll volunteer my wagon as a test mule for that price. Again, assuming that these don't require additional machining and will work with the same amount of lift generated by the stock cam.
leadphinger
01-15-2009, 12:43 AM #26(01-15-2009, 12:11 AM)Section106 I emailed a chinese factory and they have the 1 418 415 058 element for $13 USD w/ a minimum of 30 for a sample order. It might be worthwhile for someone to look into that. I would but I don't have an extra 400 bucks laying around.
http://www.chinahanji.com/MW%20PUMP-Element.asp
That's only $65 per person for 6 guys to be guinea pigs. I'll volunteer my wagon as a test mule for that price. Again, assuming that these don't require additional machining and will work with the same amount of lift generated by the stock cam.
01-15-2009, 07:54 AM
#27
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Oh I know all about the Chinese thing. I called, im'ed and emailed until my fingers were just nubs.i was told $25 minimum order 500 or something.... for $65 + shipping I am down for a set. I believe they are making these so it is entirely possible to have them adjust the length.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
01-15-2009, 12:45 PM
#28
Dear Mr. William Brown,
A nice day to you!
After checking, our factory have this element.
1 418 415 058 USD13.00/pc min. qty 30pcs for sample order
Waiting for your earliest response,
Best wishes,
Nancy Guo
ChinaHanji Power Co., Ltd.
www.chinahanji.com
www.vepump.cn
www.chinanozzle.cn
Section106
01-15-2009, 12:45 PM #28This is the email I recieved from ChinaHanji. I'll contribute but I doubt y'all want me to be the point man on this. I lack the expertise to ask the right questions and, as a new father, the sleep to pay enough attention!
Dear Mr. William Brown,
A nice day to you!
After checking, our factory have this element.
1 418 415 058 USD13.00/pc min. qty 30pcs for sample order
Waiting for your earliest response,
Best wishes,
Nancy Guo
ChinaHanji Power Co., Ltd.
www.chinahanji.com
www.vepump.cn
www.chinanozzle.cn
01-15-2009, 02:48 PM
#29
Man this is just to good to give up. Probably throwing money into a scam but..............
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
mrchill
Unregistered
01-15-2009, 05:12 PM
#30
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
This post was last modified: 01-15-2009, 05:36 PM by ForcedInduction.
mrchill
01-15-2009, 05:12 PM #30I always say...youll get plenty of sleep when youre dead..... but yes...I'll take some elements as well.
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
Gross Polluter
01-15-2009, 05:33 PM #31If someone arranges this for the chinabay elements, count me in.
01-15-2009, 09:36 PM
#32
(01-15-2009, 05:12 PM)mrchill I always say...youll get plenty of sleep when youre dead..... but yes...I'll take some elements as well.
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
These are for the MW pump. You have plenty of other options....
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(01-15-2009, 05:12 PM)mrchill I always say...youll get plenty of sleep when youre dead..... but yes...I'll take some elements as well.
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
These are for the MW pump. You have plenty of other options....
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
01-17-2009, 07:57 PM
#34
Anybody wanna be responsible for this? I'd be happy to but am relatively new to the forum and some would probably have reservations about me handling all the money. What's more? I don't have a clue as to what I'm telling them to produce for us...
leadphinger
01-17-2009, 07:57 PM #34So who is best suited to collecting the money via paypal and then providing the correct specs to the Chinese to get these things on their way?
Anybody wanna be responsible for this? I'd be happy to but am relatively new to the forum and some would probably have reservations about me handling all the money. What's more? I don't have a clue as to what I'm telling them to produce for us...
ForcedInduction
01-18-2009, 04:59 AM
#35
While its tempting, I'd rather save for Myna to build up my M-Pump.
04-23-2009, 07:48 PM
#36
'Jurgen' - 1982 300sd cream paint with palimino MB tex interior. Now running with new cooling system
.......discovered oil cooler has pinhole @#$%@
Nitrile gloves back on......'Otto' - 1985 300sd anthracite? grey/silver? with grey leather interior. (heated front seats!!!!
) Euro headlightsMods are in the works...
Telecommbrkr
04-23-2009, 07:48 PM #36Did this ever go anywhere?
'Jurgen' - 1982 300sd cream paint with palimino MB tex interior. Now running with new cooling system
.......discovered oil cooler has pinhole @#$%@ Nitrile gloves back on......'Otto' - 1985 300sd anthracite? grey/silver? with grey leather interior. (heated front seats!!!!
) Euro headlightsMods are in the works...
03-16-2011, 08:26 AM
#37
Quote:Dear Rolf,
Thanks for your reply.
Our company accept small order to test our quality and credit at first. Because you need one sample, we can supply 6 pcs or more if you need.
Just test our quality.
Waiting for your generous order.
best regards
Richard.
----- Original Message -----
From: "Rolf" <rolf@winmutt.com>
To: <richard@raderauto.com>
Sent: Wednesday, March 16, 2011 9:10 PM
Subject: Re: 1 418 415 058 price
> > Richard-
> >
> > How many are required for a test order?
> >
> > -Rolf
> >
> > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
...
Quote:Dear Rolf,
Thanks for your reply.
Our company accept small order to test our quality and credit at first. Because you need one sample, we can supply 6 pcs or more if you need.
Just test our quality.
Waiting for your generous order.
best regards
Richard.
----- Original Message -----
From: "Rolf" <rolf@winmutt.com>
To: <richard@raderauto.com>
Sent: Wednesday, March 16, 2011 9:10 PM
Subject: Re: 1 418 415 058 price
> > Richard-
> >
> > How many are required for a test order?
> >
> > -Rolf
> >
> > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
03-16-2011, 09:06 AM
#38
(03-16-2011, 08:26 AM)winmutt > > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
$11.50 for MW 8 mm? I am down with that. Where do I pay?
.
Gota love Mercedes Diesels!
.
DeliveryValve
03-16-2011, 09:06 AM #38(03-16-2011, 08:26 AM)winmutt > > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
$11.50 for MW 8 mm? I am down with that. Where do I pay?
.
Gota love Mercedes Diesels!
.
03-16-2011, 10:12 AM
#39
This post was last modified: 03-16-2011, 10:42 AM by 300D50.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
Gah... now if only I had a second IP and knew a good shop stateside for the install...
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
03-16-2011, 10:29 AM
#40
1981 300SD 230k miles "Gently Modified" Daily Driver
1999 F-250 7.3L Power Stroke 150k miles "The Usual Mods" Tow Rig
1981 300SD 190k miles "Heavily Modified"
GONE
DrewGerhan
03-16-2011, 10:29 AM #40Exactly, where do I pay?!
1981 300SD 230k miles "Gently Modified" Daily Driver
1999 F-250 7.3L Power Stroke 150k miles "The Usual Mods" Tow Rig
1981 300SD 190k miles "Heavily Modified"
GONE
03-16-2011, 10:40 AM
#41
(03-16-2011, 10:12 AM)300D50 Gah... now if only I had a second IP and new a good shop stateside for the install...
Ah details, details!
.
Gota love Mercedes Diesels!
.
DeliveryValve
03-16-2011, 10:40 AM #41(03-16-2011, 10:12 AM)300D50 Gah... now if only I had a second IP and new a good shop stateside for the install...
Ah details, details!
.
Gota love Mercedes Diesels!
.
03-16-2011, 10:52 AM
#42
Not everyone has junkyards full of old German iron close by...
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
True, but I can't justify getting cheap elements if I still need a pump! :p
Not everyone has junkyards full of old German iron close by...
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
03-16-2011, 12:26 PM
#44
![[Image: icon_mrgreen.gif]](http://www.hotrodcoffeeshop.com/forum/images/smilies/icon_mrgreen.gif){kind=icon}
I'll have to return the favor somehow though, I can't just leave you out a spare pump...Any estimate on order timeframe?
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
You just made my day! I'll have to return the favor somehow though, I can't just leave you out a spare pump...
Any estimate on order timeframe?
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
03-17-2011, 12:35 AM
#46
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
03-17-2011, 12:35 AM #46Ditto
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
03-18-2011, 09:01 PM
#47
(03-16-2011, 09:06 AM)DeliveryValve [quote='winmutt' pid='26246' dateline='1300282008']
> > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
$11.50 for MW 8 mm? I am down with that. Where do I pay?
.
[/quote]
Hello friend,
This is richard.
The MW 8MM is our products. We can get the Unit price $$11.5 . and we accept small order to test our quality at first.
Please reply me if you need it.
Richard@raderauto.com
Thanks
(01-15-2009, 05:12 PM)mrchill I always say...youll get plenty of sleep when youre dead..... but yes...I'll take some elements as well.
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
Hello friend,
This is richard.
[b][u]The MW 8MM is our products. We can get the Unit price $$11.5 . and we accept small order to test our quality at first.[/u][/b]
Please reply me if you need it.
Richard@raderauto.com
Thanks
(01-15-2009, 12:11 AM)Section106 I emailed a chinese factory and they have the 1 418 415 058 element for $13 USD w/ a minimum of 30 for a sample order. It might be worthwhile for someone to look into that. I would but I don't have an extra 400 bucks laying around.
http://www.chinahanji.com/MW%20PUMP-Element.asp
hi friend.,
this is richard. from Rader Auto Parts Group.
we can supply the MW 8mm element to you.
unit price is $11.50 only, and accept small order to test our quality at first.
please contact richard@raderauto.com
thanks
Richard
hi friend.,
this is richard. from Rader Auto Parts Group.
we can supply the MW 8mm element to you.
unit price is $11.50 only, and accept small order to test our quality at first.
please contact richard@raderauto.com
thanks
Richard
This post was last modified: 03-18-2011, 09:21 PM by raderauto.
Our parts include head rotor, nozzle, element , delivery valve, cam disk, feed pump, injector, cylinder,piston, crankshaft and so on.The parts have excellent replacement for the Bosch, Denso, Zexel, Delphi, Cat, Lucas, Stanadyne, Cummnis , Yanmar .
Richard
Rader Auto Parts Co., Ltd (www.raderauto.com )
E-Mail: Richard@raderauto.com MSN: Richard.raderauto@hotmail.com
(03-16-2011, 09:06 AM)DeliveryValve [quote='winmutt' pid='26246' dateline='1300282008']
> > On 03/16/2011 02:32 AM, richard@raderauto.com wrote:
>> >> dear Rolf,
>> >>
>> >> Good day.
>> >> Last time you inquiry us the 1 418 415 058 price, and we are still waiting for your reply.
>> >>
>> >> If you make a test order, the unit price will be $11.50. if big order, there will be discount.
>> >> please let me know how many you need.
>> >>
>> >> waiting for your reply soon.
>> >>
>> >> best regards
>> >>
>> >>
>> >> richard.
> >
>
$11.50 for MW 8 mm? I am down with that. Where do I pay?
.
[/quote]
Hello friend,
This is richard.
The MW 8MM is our products. We can get the Unit price $$11.5 . and we accept small order to test our quality at first.
Please reply me if you need it.
Richard@raderauto.com
Thanks
(01-15-2009, 05:12 PM)mrchill I always say...youll get plenty of sleep when youre dead..... but yes...I'll take some elements as well.
[quote='winmutt' pid='2143' dateline='1232048883']
Sleep is for suckers. You'll learn this after #2.
Man this is just to good to give up. Probably throwing money into a scam but..............
Hello friend,
This is richard.
[b][u]The MW 8MM is our products. We can get the Unit price $$11.5 . and we accept small order to test our quality at first.[/u][/b]
Please reply me if you need it.
Richard@raderauto.com
Thanks
(01-15-2009, 12:11 AM)Section106 I emailed a chinese factory and they have the 1 418 415 058 element for $13 USD w/ a minimum of 30 for a sample order. It might be worthwhile for someone to look into that. I would but I don't have an extra 400 bucks laying around.
http://www.chinahanji.com/MW%20PUMP-Element.asp
hi friend.,
this is richard. from Rader Auto Parts Group.
we can supply the MW 8mm element to you.
unit price is $11.50 only, and accept small order to test our quality at first.
please contact richard@raderauto.com
thanks
Richard
hi friend.,
this is richard. from Rader Auto Parts Group.
we can supply the MW 8mm element to you.
unit price is $11.50 only, and accept small order to test our quality at first.
please contact richard@raderauto.com
thanks
Richard
Our parts include head rotor, nozzle, element , delivery valve, cam disk, feed pump, injector, cylinder,piston, crankshaft and so on.The parts have excellent replacement for the Bosch, Denso, Zexel, Delphi, Cat, Lucas, Stanadyne, Cummnis , Yanmar .
Richard
Rader Auto Parts Co., Ltd (www.raderauto.com )
E-Mail: Richard@raderauto.com MSN: Richard.raderauto@hotmail.com
03-18-2011, 10:02 PM
#49
1981 300SD 230k miles "Gently Modified" Daily Driver
1999 F-250 7.3L Power Stroke 150k miles "The Usual Mods" Tow Rig
1981 300SD 190k miles "Heavily Modified"
GONE
DrewGerhan
03-18-2011, 10:02 PM #49So does everyone need to buy their own or is it a group buy? I personally would feel better about a group buy if someone could organize it.
1981 300SD 230k miles "Gently Modified" Daily Driver
1999 F-250 7.3L Power Stroke 150k miles "The Usual Mods" Tow Rig
1981 300SD 190k miles "Heavily Modified"
GONE
03-18-2011, 10:49 PM
#50
anyone need. PM me.
Our parts include head rotor, nozzle, element , delivery valve, cam disk, feed pump, injector, cylinder,piston, crankshaft and so on.The parts have excellent replacement for the Bosch, Denso, Zexel, Delphi, Cat, Lucas, Stanadyne, Cummnis , Yanmar .
Richard
Rader Auto Parts Co., Ltd (www.raderauto.com )
E-Mail: Richard@raderauto.com MSN: Richard.raderauto@hotmail.com
6 unit MW elements for a test order can be accepted , $11.50 per unit only.
anyone need. PM me.
Our parts include head rotor, nozzle, element , delivery valve, cam disk, feed pump, injector, cylinder,piston, crankshaft and so on.The parts have excellent replacement for the Bosch, Denso, Zexel, Delphi, Cat, Lucas, Stanadyne, Cummnis , Yanmar .
Richard
Rader Auto Parts Co., Ltd (www.raderauto.com )
E-Mail: Richard@raderauto.com MSN: Richard.raderauto@hotmail.com
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)