My seat upgrades

STD Tuning Body Mods My seat upgrades

My seat upgrades

View a Printable Version

0 Vote(s) - 0 Average

kamel

Naturally-aspirated SUCKS

176

01-09-2009, 04:16 PM #4

I don't have a problem with japanese parts in a german car. I don't know why the stockers were so heavy, the last owner tried to restuff them on top of the blown-out padding. Huh

On the other hand, my brother has recaros (came with truck) in his '88 Toyota pickup. The seats collapsed and the fabric's worn through, and if you get in or out wrong, the side bolsters will crush your tailbone. They may have been nice to begin with, but they are horrible now.

This post was last modified: 01-09-2009, 04:18 PM by kamel.

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

kamel

01-09-2009, 04:16 PM #4

I don't have a problem with japanese parts in a german car. I don't know why the stockers were so heavy, the last owner tried to restuff them on top of the blown-out padding. Huh On the other hand, my brother has recaros (came with truck) in his '88 Toyota pickup. The seats collapsed and the fabric's worn through, and if you get in or out wrong, the side bolsters will crush your tailbone. They may have been nice to begin with, but they are horrible now.

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs