5,5mm & 6,0 mm in same pump ( filmclip)

STD Tuning Engine 5,5mm & 6,0 mm in same pump ( filmclip)

View a Printable Version

0 Vote(s) - 0 Average

dieselmeken

Holset

407

01-11-2012, 07:47 AM #1

Yes, Im stupid, mixed the element, but it gave me the oppurtunity to maka a small clip, Here you see how much a 5,5 can perform maximum contra a 6,0 mm from a OM606 pump. The 5,5 does not give more than app 65 cc, but take a look at the 6 mm element.
The pump has now 5pc of 6 mm element inside

http://www.facebook.com/dieselmeken

dieselmeken

01-11-2012, 07:47 AM #1

http://www.facebook.com/dieselmeken

vstef_is

GT2256V

124

01-11-2012, 08:19 AM #2

And the clip (you forgot) - looks like there's only so much a 5.5 can put out...

P.S. Is it a OM617?

This post was last modified: 01-11-2012, 08:22 AM by vstef_is.

1982 s123 300TD TurboDiesel (US Spec) in France

vstef_is

01-11-2012, 08:19 AM #2

And the clip (you forgot) - looks like there's only so much a 5.5 can put out...

P.S. Is it a OM617?

1982 s123 300TD TurboDiesel (US Spec) in France

dieselmeken

Holset

407

01-11-2012, 09:21 AM #3

(01-11-2012, 08:19 AM)vstef_is And the clip (you forgot) - looks like there's only so much a 5.5 can put out...

P.S. Is it a OM617?

Yes, Thats the limit. OM617 yes.

http://www.facebook.com/dieselmeken

dieselmeken

01-11-2012, 09:21 AM #3

(01-11-2012, 08:19 AM)vstef_is And the clip (you forgot) - looks like there's only so much a 5.5 can put out...

P.S. Is it a OM617?

Yes, Thats the limit. OM617 yes.

http://www.facebook.com/dieselmeken

w210tdt

K26-2

31

01-11-2012, 03:14 PM #4

any news on the new 7,5mm elements gøran?

w210tdt

01-11-2012, 03:14 PM #4

any news on the new 7,5mm elements gøran?

lpumb3

617 300sd

141

10-05-2012, 10:15 PM #5

Do you sell the 6,0mm elements and delivery valves ? i was watching your you tube pretty impresive . i have an mw pump i would like to upgrade . i think these will be the best balance for my goals . also what size injectors would you recommend/sell with the 6.0mm element/dv's ?
thanks and i like the rock and roll pump video keep it up !

lpumb3

10-05-2012, 10:15 PM #5

awk

Naturally-aspirated

15

10-06-2012, 07:23 AM #6

wow impressive difference. you still have 6mm elements or you make only 7.5 now?

awk

10-06-2012, 07:23 AM #6

wow impressive difference. you still have 6mm elements or you make only 7.5 now?

dieselmeken

Holset

407

10-07-2012, 12:21 PM #7

(10-06-2012, 07:23 AM)awk wow impressive difference. you still have 6mm elements or you make only 7.5 now?

6mm is stock Bosch elements, 7,5 is own production. 6 mm can be bought in any Bosch dieselshop/ Göran

http://www.facebook.com/dieselmeken

dieselmeken

10-07-2012, 12:21 PM #7

(10-06-2012, 07:23 AM)awk wow impressive difference. you still have 6mm elements or you make only 7.5 now?

6mm is stock Bosch elements, 7,5 is own production. 6 mm can be bought in any Bosch dieselshop/ Göran

http://www.facebook.com/dieselmeken

Bangaway

606 Turbo > Porsche Turbo

129

10-07-2012, 04:59 PM #8

Goran: As of now, what are you offering as far as element sizes. You have 7.5mm--what else? What are the respective cc outputs for each size that you are offering?

Bangaway

10-07-2012, 04:59 PM #8

Goran: As of now, what are you offering as far as element sizes. You have 7.5mm--what else? What are the respective cc outputs for each size that you are offering?

lpumb3

617 300sd

141

10-07-2012, 07:04 PM #9

thanks Dieselmeken , do you have part numbers for the 6mm , elements and DVs ?

lpumb3

10-07-2012, 07:04 PM #9

thanks Dieselmeken , do you have part numbers for the 6mm , elements and DVs ?

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)