STD Other FS / WTB / Buying guides F/S 82 300SD near Chicago NEW PRICE

F/S 82 300SD near Chicago NEW PRICE

F/S 82 300SD near Chicago NEW PRICE

 
  • 1 Vote(s) - 5 Average
 
c0mbatphil
K26-2

29
02-12-2012, 12:40 PM #1
1982 Mercedes 300SD Turbo Diesel Automatic 155k Clean title.
Parked 7 years ago when the plates expired. Started working on it to turn into daily driver, but time constraints have stopped the project. New filters, front pads, front rotors, tires, rear rotors, rear pads, trans filter, trans fluid, oil. glow plugs and probably some other stuff I'm forgetting about. Fenders are removed but there. Both have damage. Engine is apart to clean it off and replace starter (never got done, but have brand new starter). Has some rust and a bit of body damage (little, nothing horrible.). Has been sitting again since the summer as I haven't had a chance to finish it and now I need the room and money. Needs to have starter installed, hood reinstalled, and 2 injector fuel lines replaced. Comes with some spare parts, brand new starter, 2 brand new batteries and some other misc. stuff. Consider this a project car. Has the venerable OM617 5cyl 3.0 diesel engine. At 155k, it's just getting broken in! Great car for a veg oil or biodiesel conversion. Have clean title. Call/text Phil- 630-788-6013
This post was last modified: 02-17-2012, 06:29 PM by c0mbatphil.
c0mbatphil
02-12-2012, 12:40 PM #1

1982 Mercedes 300SD Turbo Diesel Automatic 155k Clean title.
Parked 7 years ago when the plates expired. Started working on it to turn into daily driver, but time constraints have stopped the project. New filters, front pads, front rotors, tires, rear rotors, rear pads, trans filter, trans fluid, oil. glow plugs and probably some other stuff I'm forgetting about. Fenders are removed but there. Both have damage. Engine is apart to clean it off and replace starter (never got done, but have brand new starter). Has some rust and a bit of body damage (little, nothing horrible.). Has been sitting again since the summer as I haven't had a chance to finish it and now I need the room and money. Needs to have starter installed, hood reinstalled, and 2 injector fuel lines replaced. Comes with some spare parts, brand new starter, 2 brand new batteries and some other misc. stuff. Consider this a project car. Has the venerable OM617 5cyl 3.0 diesel engine. At 155k, it's just getting broken in! Great car for a veg oil or biodiesel conversion. Have clean title. Call/text Phil- 630-788-6013

c0mbatphil
K26-2

29
02-17-2012, 06:30 PM #2
Price change and added picture: $1700obo cash.
c0mbatphil
02-17-2012, 06:30 PM #2

Price change and added picture: $1700obo cash.

c0mbatphil
K26-2

29
02-19-2012, 11:06 PM #3
$1500obo.
c0mbatphil
02-19-2012, 11:06 PM #3

$1500obo.

c0mbatphil
K26-2

29
02-22-2012, 01:03 AM #4
$1300obo or trade.........
c0mbatphil
02-22-2012, 01:03 AM #4

$1300obo or trade.........

vstef_is
GT2256V

124
02-22-2012, 02:01 AM #5
Pics?

1982 s123 300TD TurboDiesel (US Spec) in France
vstef_is
02-22-2012, 02:01 AM #5

Pics?


1982 s123 300TD TurboDiesel (US Spec) in France

c0mbatphil
K26-2

29
04-06-2012, 11:01 PM #6
bump... selling for best offer. pics i do not have on this computer unfortunately. i can take some, it will just be a few days.... as i'm not on here often, you can text/call 630-788-6013. thanks.
c0mbatphil
04-06-2012, 11:01 PM #6

bump... selling for best offer. pics i do not have on this computer unfortunately. i can take some, it will just be a few days.... as i'm not on here often, you can text/call 630-788-6013. thanks.

c0mbatphil
K26-2

29
04-21-2012, 03:08 PM #7
bump....
c0mbatphil
04-21-2012, 03:08 PM #7

bump....

JB3
Superturbo

1,795
04-22-2012, 10:26 AM #8
Definitely need pics.

Also, personally id put the starter and manifolds in and have a running car if that's all it would take. For the price you are looking to get, engine should be running and the car should be drivable, that would be a decent 1200 dollar car.

With it as described, sounds like a 500 dollar car or less honestly

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
04-22-2012, 10:26 AM #8

Definitely need pics.

Also, personally id put the starter and manifolds in and have a running car if that's all it would take. For the price you are looking to get, engine should be running and the car should be drivable, that would be a decent 1200 dollar car.

With it as described, sounds like a 500 dollar car or less honestly


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

c0mbatphil
K26-2

29
04-22-2012, 02:32 PM #9
i'll see what i can do about the pics. problem is i'm not out that way very often anymore. i'd take $5-600 on it right now if someone would come get it.
c0mbatphil
04-22-2012, 02:32 PM #9

i'll see what i can do about the pics. problem is i'm not out that way very often anymore. i'd take $5-600 on it right now if someone would come get it.

dieseljunky
Naturally-aspirated

7
04-27-2012, 11:57 PM #10
Is the car an auto or manual? Is it N/A or turbo. I might be interested in it. Need some parts for my 83.

2001 Dodge Ram 2500 Cummins 24V 4x4 5spd - 3600# SD Clutch from Kenny's Pulling Parts - Stage 5 Jammer Nozzles - AEM Intake - Edge Juice w/Attitude - Glowshift Boost, Oil Temp, Trans Temp - Leveled - Raptor 150 - 1/2" lines from tank to VP - Recon Smoked Cab Lights
1983 Mercedes Benz 300D Auto - Stock minus short ram intake
dieseljunky
04-27-2012, 11:57 PM #10

Is the car an auto or manual? Is it N/A or turbo. I might be interested in it. Need some parts for my 83.


2001 Dodge Ram 2500 Cummins 24V 4x4 5spd - 3600# SD Clutch from Kenny's Pulling Parts - Stage 5 Jammer Nozzles - AEM Intake - Edge Juice w/Attitude - Glowshift Boost, Oil Temp, Trans Temp - Leveled - Raptor 150 - 1/2" lines from tank to VP - Recon Smoked Cab Lights
1983 Mercedes Benz 300D Auto - Stock minus short ram intake

sassparilla_kid
diesel > all other fuels

1,618
04-28-2012, 01:44 AM #11
(04-27-2012, 11:57 PM)dieseljunky Is the car an auto or manual? Is it N/A or turbo. I might be interested in it. Need some parts for my 83.

It should be turbocharged with an automatic transmission

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-28-2012, 01:44 AM #11

(04-27-2012, 11:57 PM)dieseljunky Is the car an auto or manual? Is it N/A or turbo. I might be interested in it. Need some parts for my 83.

It should be turbocharged with an automatic transmission


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

dieseljunky
Naturally-aspirated

7
04-28-2012, 02:26 PM #12
Yeah I just saw that. I was tired last night when I posted that. I'm really interested though. Suppose I'll throw this guy a txt and see if it's still available.

2001 Dodge Ram 2500 Cummins 24V 4x4 5spd - 3600# SD Clutch from Kenny's Pulling Parts - Stage 5 Jammer Nozzles - AEM Intake - Edge Juice w/Attitude - Glowshift Boost, Oil Temp, Trans Temp - Leveled - Raptor 150 - 1/2" lines from tank to VP - Recon Smoked Cab Lights
1983 Mercedes Benz 300D Auto - Stock minus short ram intake
dieseljunky
04-28-2012, 02:26 PM #12

Yeah I just saw that. I was tired last night when I posted that. I'm really interested though. Suppose I'll throw this guy a txt and see if it's still available.


2001 Dodge Ram 2500 Cummins 24V 4x4 5spd - 3600# SD Clutch from Kenny's Pulling Parts - Stage 5 Jammer Nozzles - AEM Intake - Edge Juice w/Attitude - Glowshift Boost, Oil Temp, Trans Temp - Leveled - Raptor 150 - 1/2" lines from tank to VP - Recon Smoked Cab Lights
1983 Mercedes Benz 300D Auto - Stock minus short ram intake

c0mbatphil
K26-2

29
04-28-2012, 11:26 PM #13
auto, turbo, still available. text/call me!
c0mbatphil
04-28-2012, 11:26 PM #13

auto, turbo, still available. text/call me!

c0mbatphil
K26-2

29
05-03-2012, 08:02 PM #14
adding pictures... still trying to find my other ones...
Attached Files
Image(s)
               
c0mbatphil
05-03-2012, 08:02 PM #14

adding pictures... still trying to find my other ones...

Attached Files
Image(s)
               

c0mbatphil
K26-2

29
05-18-2012, 09:16 PM #15
ONE WEEK. Meet or beat the junkman's price of $325 picked up. Yes I could make more money parting it out... I have a baby on the way in less then 10 weeks and I'm in the middle of rebuilding a bunch of crap on my wife's car and remodeling a baby's room. Buy it. You make the profit off of it. Need it gone. Will roll onto a trailer fine. PM/Text/Call/Email me. Thanks.
c0mbatphil
05-18-2012, 09:16 PM #15

ONE WEEK. Meet or beat the junkman's price of $325 picked up. Yes I could make more money parting it out... I have a baby on the way in less then 10 weeks and I'm in the middle of rebuilding a bunch of crap on my wife's car and remodeling a baby's room. Buy it. You make the profit off of it. Need it gone. Will roll onto a trailer fine. PM/Text/Call/Email me. Thanks.

larsalan
Superturbo

1,272
05-19-2012, 12:04 AM #16
golly you have been trying to sell that thing forever! I can't believe it's not gone. And for $325 you might as well pull the 617 and trans and put it on a pallet!
Make a nice boat for the family some day.
I wish I could have that hardware Wink not eh 126 body though. Not my style Wink

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
05-19-2012, 12:04 AM #16

golly you have been trying to sell that thing forever! I can't believe it's not gone. And for $325 you might as well pull the 617 and trans and put it on a pallet!
Make a nice boat for the family some day.
I wish I could have that hardware Wink not eh 126 body though. Not my style Wink


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

lgreeley83
Mr. Rumbles

775
05-19-2012, 11:04 AM #17
what town are you in? I might want to come and molest a part or two. What junkjard are you putting it in? Im near ohare. Price is something id pay if i had room. Dont have room.

" straighten up that star on the grill, assholes."

lgreeley83
05-19-2012, 11:04 AM #17

what town are you in? I might want to come and molest a part or two. What junkjard are you putting it in? Im near ohare. Price is something id pay if i had room. Dont have room.


" straighten up that star on the grill, assholes."

c0mbatphil
K26-2

29
05-19-2012, 07:54 PM #18
it's in oswego. it's worth taking home, stripping what you want and scrapping the rest. could be done over a weekend for someone who had time. well worth it in drivetrain alone, not including the new stuff i put on it before it started sitting...
c0mbatphil
05-19-2012, 07:54 PM #18

it's in oswego. it's worth taking home, stripping what you want and scrapping the rest. could be done over a weekend for someone who had time. well worth it in drivetrain alone, not including the new stuff i put on it before it started sitting...

c0mbatphil
K26-2

29
05-21-2012, 09:58 PM #19
really? no one?
c0mbatphil
05-21-2012, 09:58 PM #19

really? no one?

lgreeley83
Mr. Rumbles

775
05-21-2012, 10:26 PM #20
Its killing me. I want to tear into it. Busy finals week, no space, im in arlington heights area too. Not a quick drive. May have some time later in the week. I would buy parts from you. You would likely get the same money from the junk man afterword.

Proly take some from calipers, rotors. Pad, glow plugs. Etc. Pretty broke right now too. What day is junk man day?

The lack of interest is tough i know. Over the winter i had a 1982 Chevy Impala 9c1 for sale. It was a california fire department car, all original fire red paint, bull bar, antenna, original completely rust free boxy chevy. In the chicago area you know gangsters want this car to put 20" wheels on and whatever. I bough a few years back when still into gas powered 350 motors. car had 61,000 original miles. Car needed nothing. I ended selling it for 1700, radio and tires alone cost that much.

The bitch of it, in an inner city car lot i had seen a beat up boxy chevy for 5000 a few months prior. I wouldn't have paid more than 300 for and it sold in a couple of weeks.
This post was last modified: 05-21-2012, 10:36 PM by lgreeley83.

" straighten up that star on the grill, assholes."

lgreeley83
05-21-2012, 10:26 PM #20

Its killing me. I want to tear into it. Busy finals week, no space, im in arlington heights area too. Not a quick drive. May have some time later in the week. I would buy parts from you. You would likely get the same money from the junk man afterword.

Proly take some from calipers, rotors. Pad, glow plugs. Etc. Pretty broke right now too. What day is junk man day?


The lack of interest is tough i know. Over the winter i had a 1982 Chevy Impala 9c1 for sale. It was a california fire department car, all original fire red paint, bull bar, antenna, original completely rust free boxy chevy. In the chicago area you know gangsters want this car to put 20" wheels on and whatever. I bough a few years back when still into gas powered 350 motors. car had 61,000 original miles. Car needed nothing. I ended selling it for 1700, radio and tires alone cost that much.

The bitch of it, in an inner city car lot i had seen a beat up boxy chevy for 5000 a few months prior. I wouldn't have paid more than 300 for and it sold in a couple of weeks.


" straighten up that star on the grill, assholes."

c0mbatphil
K26-2

29
05-22-2012, 06:11 PM #21
i'd like to get rid of it in one go if at all possible. junkman day depends on what interest is in it. i REALLY do not want to scrap it. newer tires on it, new brakes, blah blah blah.

that blows. the car market is so screwed right now, especially around here.
c0mbatphil
05-22-2012, 06:11 PM #21

i'd like to get rid of it in one go if at all possible. junkman day depends on what interest is in it. i REALLY do not want to scrap it. newer tires on it, new brakes, blah blah blah.

that blows. the car market is so screwed right now, especially around here.

lgreeley83
Mr. Rumbles

775
05-22-2012, 09:26 PM #22
Well i got my father in the show. He has a yard and triple A. Gonna forward him the link and see what he says. I could use some parts for sure. Let ya know if there is interest tommarow. As far as motor being apart...how far apart is it?

" straighten up that star on the grill, assholes."

lgreeley83
05-22-2012, 09:26 PM #22

Well i got my father in the show. He has a yard and triple A. Gonna forward him the link and see what he says. I could use some parts for sure. Let ya know if there is interest tommarow. As far as motor being apart...how far apart is it?


" straighten up that star on the grill, assholes."

c0mbatphil
K26-2

29
05-23-2012, 08:53 PM #23
ok! manifold are off and some little odds and ends are off. fenders and hood are off. its got newer tires on it and has been sitting on jack stands. it'll roll freely right onto a trailer or onto a tow truck.
c0mbatphil
05-23-2012, 08:53 PM #23

ok! manifold are off and some little odds and ends are off. fenders and hood are off. its got newer tires on it and has been sitting on jack stands. it'll roll freely right onto a trailer or onto a tow truck.

OM616
10mm MW

572
05-24-2012, 09:53 PM #24
(05-23-2012, 08:53 PM)c0mbatphil ok! manifold are off and some little odds and ends are off. fenders and hood are off. its got newer tires on it and has been sitting on jack stands. it'll roll freely right onto a trailer or onto a tow truck.

Is it still avaiable? How far from Detroit are you?
OM616
05-24-2012, 09:53 PM #24

(05-23-2012, 08:53 PM)c0mbatphil ok! manifold are off and some little odds and ends are off. fenders and hood are off. its got newer tires on it and has been sitting on jack stands. it'll roll freely right onto a trailer or onto a tow truck.

Is it still avaiable? How far from Detroit are you?

c0mbatphil
K26-2

29
05-25-2012, 08:55 AM #25
still available and that depends on how fast you drive, lol.... between 5-6 hours. would love to get rid of it this weekend while i have the time to....

Also, I will be running around all day today. CALL/TEXT me. 630-788-6013.

I will be running around all day today. CALL ME if interested. 630-788-6013.
This post was last modified: 05-25-2012, 09:51 AM by c0mbatphil.
c0mbatphil
05-25-2012, 08:55 AM #25

still available and that depends on how fast you drive, lol.... between 5-6 hours. would love to get rid of it this weekend while i have the time to....


Also, I will be running around all day today. CALL/TEXT me. 630-788-6013.

I will be running around all day today. CALL ME if interested. 630-788-6013.

OM616
10mm MW

572
05-25-2012, 01:38 PM #26
(05-25-2012, 08:55 AM)c0mbatphil still available and that depends on how fast you drive, lol.... between 5-6 hours. would love to get rid of it this weekend while i have the time to....

Also, I will be running around all day today. CALL/TEXT me. 630-788-6013.

I will be running around all day today. CALL ME if interested. 630-788-6013.

I just called and left a message
OM616
05-25-2012, 01:38 PM #26

(05-25-2012, 08:55 AM)c0mbatphil still available and that depends on how fast you drive, lol.... between 5-6 hours. would love to get rid of it this weekend while i have the time to....

Also, I will be running around all day today. CALL/TEXT me. 630-788-6013.

I will be running around all day today. CALL ME if interested. 630-788-6013.

I just called and left a message

lgreeley83
Mr. Rumbles

775
05-26-2012, 09:03 PM #27
no dice here. Pops got no interest. Sorry bout the market.

" straighten up that star on the grill, assholes."

lgreeley83
05-26-2012, 09:03 PM #27

no dice here. Pops got no interest. Sorry bout the market.


" straighten up that star on the grill, assholes."

c0mbatphil
K26-2

29
05-27-2012, 09:25 AM #28
Still sitting.... one possible pending.... but still sitting....
c0mbatphil
05-27-2012, 09:25 AM #28

Still sitting.... one possible pending.... but still sitting....

OM616
10mm MW

572
05-27-2012, 02:42 PM #29
I just talked to my guy and dad said no. I would pick it up, but I am too thin cash wise. I hate to see it crushed! I would be willing to put it back together for you, may be it would be an easer sell then?

There has to be some way to save it.
OM616
05-27-2012, 02:42 PM #29

I just talked to my guy and dad said no. I would pick it up, but I am too thin cash wise. I hate to see it crushed! I would be willing to put it back together for you, may be it would be an easer sell then?

There has to be some way to save it.

c0mbatphil
K26-2

29
05-28-2012, 09:21 AM #30
Still sitting... someone save it......
c0mbatphil
05-28-2012, 09:21 AM #30

Still sitting... someone save it......

c0mbatphil
K26-2

29
06-08-2012, 09:02 PM #31
sold.
c0mbatphil
06-08-2012, 09:02 PM #31

sold.

sassparilla_kid
diesel > all other fuels

1,618
06-09-2012, 06:05 PM #32
Congrats!

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
06-09-2012, 06:05 PM #32

Congrats!


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

 
  • 1 Vote(s) - 5 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)