STD Tuning Drivetrain half shaft dissaaembly ?

half shaft dissaaembly ?

half shaft dissaaembly ?

 
  • 0 Vote(s) - 0 Average
 
NapaBavarian
GT2256V

119
02-28-2012, 08:27 PM #1
I picked up a set of boots and almost have the axle shafts out of the car, is there a trick to take the end apart?
NapaBavarian
02-28-2012, 08:27 PM #1

I picked up a set of boots and almost have the axle shafts out of the car, is there a trick to take the end apart?

capflya
Dreaming of a VNT

309
02-29-2012, 02:13 AM #2
Never done it personally... I have the mercedes FSM on my computer that has the procedures for replacing the boots.

PM me your email and I can send you the pages that show how to replace the boots.

-David

P.S. I see you're in "Napa?" I live in Napa as well... there's a mercedes guy here that is usually pretty helpful and knows a good amount about these W123's. Usually willing to give advice as well. His name is Marc, maybe you already know him?

P.P.S if you ever plan on doing the front lower ball joints I have the tool to press them in. All the shops in the area wanted $100 minimum to press them both in so I just bought the tool Big Grin



'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
capflya
02-29-2012, 02:13 AM #2

Never done it personally... I have the mercedes FSM on my computer that has the procedures for replacing the boots.

PM me your email and I can send you the pages that show how to replace the boots.

-David

P.S. I see you're in "Napa?" I live in Napa as well... there's a mercedes guy here that is usually pretty helpful and knows a good amount about these W123's. Usually willing to give advice as well. His name is Marc, maybe you already know him?

P.P.S if you ever plan on doing the front lower ball joints I have the tool to press them in. All the shops in the area wanted $100 minimum to press them both in so I just bought the tool Big Grin




'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use Big Grin
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.

NapaBavarian
GT2256V

119
02-29-2012, 10:25 AM #3
I am in Napa and own a Duramax too but no euro headlights, my second cousin tad half a dozen diesel mercedes
NapaBavarian
02-29-2012, 10:25 AM #3

I am in Napa and own a Duramax too but no euro headlights, my second cousin tad half a dozen diesel mercedes

JB3
Superturbo

1,795
03-01-2012, 10:26 AM #4
I looked into this too, don't think you can disassemble the cans without grinding off the lip and otherwise destroying the end cap of the cansiter and needing a new cap.

there are some pretty interesting youtube videos showing how you can use a lubed up funnel to slide the boot over the can though with it all together. its possible to do without taking the can apart. Never tried it, if you do, post pics!

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
03-01-2012, 10:26 AM #4

I looked into this too, don't think you can disassemble the cans without grinding off the lip and otherwise destroying the end cap of the cansiter and needing a new cap.

there are some pretty interesting youtube videos showing how you can use a lubed up funnel to slide the boot over the can though with it all together. its possible to do without taking the can apart. Never tried it, if you do, post pics!


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

NapaBavarian
GT2256V

119
03-02-2012, 01:55 PM #5
Like this guy?

http://www.youtube.com/watch?v=F17tFS6ofzU



(03-01-2012, 10:26 AM)dropnosky I looked into this too, don't think you can disassemble the cans without grinding off the lip and otherwise destroying the end cap of the cansiter and needing a new cap.

there are some pretty interesting youtube videos showing how you can use a lubed up funnel to slide the boot over the can though with it all together. its possible to do without taking the can apart. Never tried it, if you do, post pics!

NapaBavarian
03-02-2012, 01:55 PM #5

Like this guy?

http://www.youtube.com/watch?v=F17tFS6ofzU



(03-01-2012, 10:26 AM)dropnosky I looked into this too, don't think you can disassemble the cans without grinding off the lip and otherwise destroying the end cap of the cansiter and needing a new cap.

there are some pretty interesting youtube videos showing how you can use a lubed up funnel to slide the boot over the can though with it all together. its possible to do without taking the can apart. Never tried it, if you do, post pics!

JB3
Superturbo

1,795
03-02-2012, 07:07 PM #6
(03-02-2012, 01:55 PM)NapaBavarian Like this guy?

Thats the guy!

Let us know how that works out. That guy makes it look simple as all hell

1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

JB3
03-02-2012, 07:07 PM #6

(03-02-2012, 01:55 PM)NapaBavarian Like this guy?

Thats the guy!

Let us know how that works out. That guy makes it look simple as all hell


1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

DeliveryValve
Superturbo

1,338
03-03-2012, 11:27 AM #7
This link shows replacing the boots with original types.
http://boostnbenz.1baddsm.com/DIY/CVboots/


.

Gota love Mercedes Diesels!



.
DeliveryValve
03-03-2012, 11:27 AM #7

This link shows replacing the boots with original types.
http://boostnbenz.1baddsm.com/DIY/CVboots/


.


Gota love Mercedes Diesels!



.

NapaBavarian
GT2256V

119
03-04-2012, 04:22 PM #8
Riiiiiiiight

Really?

What step did he forget to include? Not happening!



(03-02-2012, 07:07 PM)dropnosky
(03-02-2012, 01:55 PM)NapaBavarian Like this guy?

Thats the guy!

Let us know how that works out. That guy makes it look simple as all hell

NapaBavarian
03-04-2012, 04:22 PM #8

Riiiiiiiight

Really?

What step did he forget to include? Not happening!



(03-02-2012, 07:07 PM)dropnosky
(03-02-2012, 01:55 PM)NapaBavarian Like this guy?

Thats the guy!

Let us know how that works out. That guy makes it look simple as all hell

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)