Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OM606 max performance?
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#1
OM606 max performance?
Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile
02-29-2012, 11:00 AM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#2
RE: OM606 max performance?
(02-29-2012, 11:00 AM)GeorgeHasmanda Wrote: Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
02-29-2012, 04:47 PM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#3
RE: OM606 max performance?
(02-29-2012, 04:47 PM)EDH_Performance Wrote:
(02-29-2012, 11:00 AM)GeorgeHasmanda Wrote: Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
think you a BMW E30? i see too.think you 500hp no problem?

03-01-2012, 11:07 AM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#4
RE: OM606 max performance?
Stock engine can easily put out 500hp with a good manifold, turbo and Injection pumpWink
03-02-2012, 05:34 AM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#5
RE: OM606 max performance?
ok,thank you very much Wink
03-02-2012, 10:57 AM
Find Reply
tomnik Offline
Holset
****


Posts: 587
Joined: May 2008
Location: Germany
#6
RE: OM606 max performance?
btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda Wrote: ok,thank you very much Wink

03-03-2012, 12:37 AM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#7
RE: OM606 max performance?
(03-03-2012, 12:37 AM)tomnik Wrote: btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda Wrote: ok,thank you very much Wink
I'm from Karlovy Vary.

03-04-2012, 04:05 AM
Find Reply
mantahead Offline
Holset
****


Posts: 600
Joined: Oct 2010
Location: n-ireland
#8
RE: OM606 max performance?
(02-29-2012, 04:47 PM)EDH_Performance Wrote:
(02-29-2012, 11:00 AM)GeorgeHasmanda Wrote: Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne

03-05-2012, 04:57 PM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#9
RE: OM606 max performance?
(03-05-2012, 04:57 PM)mantahead Wrote:
(02-29-2012, 04:47 PM)EDH_Performance Wrote:
(02-29-2012, 11:00 AM)GeorgeHasmanda Wrote: Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne
I dont know how big the elements was, but it was an HX55 TURBO! Big Grin
Haven`t heard of anything higher, but my goal is over 1000NM Smile
03-11-2012, 04:40 PM
Find Reply
mantahead Offline
Holset
****


Posts: 600
Joined: Oct 2010
Location: n-ireland
#10
RE: OM606 max performance?
hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne
03-11-2012, 05:36 PM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#11
RE: OM606 max performance?
(03-11-2012, 05:36 PM)mantahead Wrote: hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
03-11-2012, 05:58 PM
Find Reply
mantahead Offline
Holset
****


Posts: 600
Joined: Oct 2010
Location: n-ireland
#12
RE: OM606 max performance?
(03-11-2012, 05:58 PM)EDH_Performance Wrote:
(03-11-2012, 05:36 PM)mantahead Wrote: hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.


(This post was last modified: 03-12-2012, 05:38 PM by mantahead.)
03-12-2012, 05:34 PM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#13
RE: OM606 max performance?
(03-12-2012, 05:34 PM)mantahead Wrote:
(03-11-2012, 05:58 PM)EDH_Performance Wrote:
(03-11-2012, 05:36 PM)mantahead Wrote: hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?

03-16-2012, 02:18 PM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#14
RE: OM606 max performance?
(03-16-2012, 02:18 PM)GeorgeHasmanda Wrote:
(03-12-2012, 05:34 PM)mantahead Wrote:
(03-11-2012, 05:58 PM)EDH_Performance Wrote: a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink

03-16-2012, 07:02 PM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#15
RE: OM606 max performance?
(03-16-2012, 07:02 PM)EDH_Performance Wrote:
(03-16-2012, 02:18 PM)GeorgeHasmanda Wrote:
(03-12-2012, 05:34 PM)mantahead Wrote: hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz

03-18-2012, 07:01 AM
Find Reply
EDH_Performance Offline
Holset
****


Posts: 537
Joined: May 2011
Location: South-Norway
#16
RE: OM606 max performance?
(03-18-2012, 07:01 AM)GeorgeHasmanda Wrote:
(03-16-2012, 07:02 PM)EDH_Performance Wrote:
(03-16-2012, 02:18 PM)GeorgeHasmanda Wrote: 1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz
Check out my "norwegian Build" in the project threadsSmile

03-19-2012, 08:01 AM
Find Reply
mao76 Offline
TA 0301
**


Posts: 65
Joined: Jul 2012
Location: italy
#17
RE: OM606 max performance?
a motor bmw 330d from 231cv how much you/he/she could make of maximum hp?with an elaboration of the kind?
07-20-2012, 07:01 PM
Find Reply
Turbo Offline
Holset
****


Posts: 489
Joined: Oct 2011
Location: sweden
#18
RE: OM606 max performance?
If you look at
http://forums.tdiclub.com/showthread.php...hlight=vnt
there are clams of machines 700-900hp but not any dyno paper or some other evidence. I have heard of other stories of other monsters but still not been able to confirm them
search on jeemu and you find some nice stuff but there are more
07-22-2012, 04:34 PM
Find Reply
mao76 Offline
TA 0301
**


Posts: 65
Joined: Jul 2012
Location: italy
#19
RE: OM606 max performance?
I would want to climb on a holset hx35 or a gtx3071r that it perhaps has less lag, you what you recommend me on my bmw330d
09-12-2012, 04:19 PM
Find Reply
GeorgeHasmanda Offline
Naturally-aspirated
*


Posts: 21
Joined: Feb 2012
Location: Czech Republic
#20
RE: OM606 max performance?
Hello diesel maniacs.i have question,I have Om606 and i dont now how injection pump need I? Dieselmenken said 7.5 elements and 180cc a RS203 pump. This pump is from OM603 w124 or no?How I improve cc? an pumps camshaft is ok for 500hp or no? thanks very much
11-04-2012, 09:19 AM
Find Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)