7mm elements, what's your take?
7mm elements, what's your take?
http://www.dieselkontor.de/product_info....ts_id=3271
I have just been informed about this website that sells 7mm elements for 40 euro each. Think they are any good or just the cheap chinese elements?
http://www.dieselkontor.de/product_info....ts_id=3271
(08-31-2012, 06:02 PM)toyfreak I have just been informed about this website that sells 7mm elements for 40 euro each. Think they are any good or just the cheap chinese elements?
http://www.dieselkontor.de/product_info....ts_id=3271
They work,but its the old Ford Transit element with flat head, no retard notch at low idle, max 120cc of fuel.
dieselmeken
09-01-2012, 02:57 AM #2(08-31-2012, 06:02 PM)toyfreak I have just been informed about this website that sells 7mm elements for 40 euro each. Think they are any good or just the cheap chinese elements?
http://www.dieselkontor.de/product_info....ts_id=3271
They work,but its the old Ford Transit element with flat head, no retard notch at low idle, max 120cc of fuel.
Thanks
Deni
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
![[Image: 3803751914_8fdca63138_o.jpg]](http://farm4.static.flickr.com/3543/3803751914_8fdca63138_o.jpg)
Interesting. Which Ford Transit used them? Would they be any better than 6mm elements? What is their disadvantage over the stock elements? Like rough idle etc?
Thanks
Deni
1992 Mercedes 190D 2.5 turbo 5sp manual. EGT+boost gauges. Boost controller set to ~14.5 psi. 1 1/4 turns on full load adjustment. LPG injection.
That helps to avoid issues like rough idle, having to do troubleshooting and so on.
Like dieselmeken said, the original Bosch elements e.g. miss a retard notch for the stuff we do.
Gruß
Volker
I can recommend Tomniks elements (Tomnik is a member here). They are a little more expensive than others, but the quality is the best I have seen so far AND they are designed for the stuff we do here.
That helps to avoid issues like rough idle, having to do troubleshooting and so on.
Like dieselmeken said, the original Bosch elements e.g. miss a retard notch for the stuff we do.
Gruß
Volker
(09-01-2012, 07:11 AM)Deni Interesting. Which Ford Transit used them? Would they be any better than 6mm elements? What is their disadvantage over the stock elements? Like rough idle etc?
Thanks
Deni
Not for MW, only M-serie. Ford Transit, the old York 2,4 diesel between 74-78 i think it was.
These old element is not to be recommended if you shall have your car for daily drive, for race / drifting they are OK but you can get hard nailing on low idle
dieselmeken
09-01-2012, 09:52 AM #7(09-01-2012, 07:11 AM)Deni Interesting. Which Ford Transit used them? Would they be any better than 6mm elements? What is their disadvantage over the stock elements? Like rough idle etc?
Thanks
Deni
Not for MW, only M-serie. Ford Transit, the old York 2,4 diesel between 74-78 i think it was.
These old element is not to be recommended if you shall have your car for daily drive, for race / drifting they are OK but you can get hard nailing on low idle
1 Guest(s)
1 Guest(s)