STD Tuning Engine Super Pumps from Finland

Super Pumps from Finland

Super Pumps from Finland

 
  • 1 Vote(s) - 5 Average
 
jeemu
"some people do, some people talk."

457
09-28-2012, 01:50 PM #1
If need 8mm pump and high fuel amount on high rpm s adress to contact is info@herlevi.fi

They can give good service and thy listen customer wishes.

OM605 600hp diesel drag car build with BMW E30 chassis
jeemu
09-28-2012, 01:50 PM #1

If need 8mm pump and high fuel amount on high rpm s adress to contact is info@herlevi.fi

They can give good service and thy listen customer wishes.


OM605 600hp diesel drag car build with BMW E30 chassis

Siekkinen
TA 0301

54
09-29-2012, 09:03 AM #2
Max fuel up to 7200 rpm. 270mm3 max

w124 300 STD/daily driver
w202 250 TDT
w201 2.6E
Siekkinen
09-29-2012, 09:03 AM #2

Max fuel up to 7200 rpm. 270mm3 max


w124 300 STD/daily driver
w202 250 TDT
w201 2.6E

winmutt
bitbanger

3,468
09-29-2012, 03:47 PM #3
(09-28-2012, 01:50 PM)jeemu If need 8mm pump and high fuel amount on high rpm s adress to contact is info@herlevi.fi

They can give good service and thy listen customer wishes.

Pics or it didnt happen!

Does this mean Jeemu has another project in his hands?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
09-29-2012, 03:47 PM #3

(09-28-2012, 01:50 PM)jeemu If need 8mm pump and high fuel amount on high rpm s adress to contact is info@herlevi.fi

They can give good service and thy listen customer wishes.

Pics or it didnt happen!

Does this mean Jeemu has another project in his hands?


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

tomnik
Holset

587
09-29-2012, 03:48 PM #4
interesting how you can get 270 ccm/1000 with 7mm plunger lift minus pre lift and a diameter of 8mm ....
But anyway, what nozzles are suitable for those delivery and rpm?
Any changes in hard line design and delivery valves?
Different governor springs or just light fly weights?
Daily drivable?


Tom


(09-29-2012, 09:03 AM)Siekkinen Max fuel up to 7200 rpm. 270mm3 max
tomnik
09-29-2012, 03:48 PM #4

interesting how you can get 270 ccm/1000 with 7mm plunger lift minus pre lift and a diameter of 8mm ....
But anyway, what nozzles are suitable for those delivery and rpm?
Any changes in hard line design and delivery valves?
Different governor springs or just light fly weights?
Daily drivable?


Tom


(09-29-2012, 09:03 AM)Siekkinen Max fuel up to 7200 rpm. 270mm3 max

dieselmeken
Holset

407
09-30-2012, 05:14 AM #5
(09-29-2012, 03:48 PM)tomnik interesting how you can get 270 ccm/1000 with 7mm plunger lift minus pre lift and a diameter of 8mm ....
But anyway, what nozzles are suitable for those delivery and rpm?
Any changes in hard line design and delivery valves?
Different governor springs or just light fly weights?
Daily drivable?


Tom


(09-29-2012, 09:03 AM)Siekkinen Max fuel up to 7200 rpm. 270mm3 max

Yes this is intresting, sounds like pure race in my ears, not for daily drive & 270cc with std deliveryvalves sound a bit too much, maybee with modified valves, but Jeemu sure have some answer to us.
dieselmeken
09-30-2012, 05:14 AM #5

(09-29-2012, 03:48 PM)tomnik interesting how you can get 270 ccm/1000 with 7mm plunger lift minus pre lift and a diameter of 8mm ....
But anyway, what nozzles are suitable for those delivery and rpm?
Any changes in hard line design and delivery valves?
Different governor springs or just light fly weights?
Daily drivable?


Tom


(09-29-2012, 09:03 AM)Siekkinen Max fuel up to 7200 rpm. 270mm3 max

Yes this is intresting, sounds like pure race in my ears, not for daily drive & 270cc with std deliveryvalves sound a bit too much, maybee with modified valves, but Jeemu sure have some answer to us.

jeemu
"some people do, some people talk."

457
09-30-2012, 03:55 PM #6
Pleace read that start post again.

OM605 600hp diesel drag car build with BMW E30 chassis
jeemu
09-30-2012, 03:55 PM #6

Pleace read that start post again.


OM605 600hp diesel drag car build with BMW E30 chassis

mantahead
Holset

600
10-01-2012, 04:16 PM #7
(09-30-2012, 03:55 PM)jeemu Pleace read that start post again.

secret pumps from finlandBig GrinCool
mantahead
10-01-2012, 04:16 PM #7

(09-30-2012, 03:55 PM)jeemu Pleace read that start post again.

secret pumps from finlandBig GrinCool

dieselmeken
Holset

407
10-02-2012, 07:15 AM #8
Yes, Big secret.Tongue
I got a mail anyway.
Hi.
Is the 7000 rpm M-pump drivable or only for race? Is the governor
lightned or is it another governor spring in it? How to get 270cc of
fuel? Modified deliveryvalves? Price on 8 mm pump? / Göran

Hello,
Possible use pump in drivable.
Pump informations are secret , Sorry
Price is 2200€
dieselmeken
10-02-2012, 07:15 AM #8

Yes, Big secret.Tongue
I got a mail anyway.
Hi.
Is the 7000 rpm M-pump drivable or only for race? Is the governor
lightned or is it another governor spring in it? How to get 270cc of
fuel? Modified deliveryvalves? Price on 8 mm pump? / Göran

Hello,
Possible use pump in drivable.
Pump informations are secret , Sorry
Price is 2200€

mercemann
Naturally-aspirated

13
10-02-2012, 01:58 PM #9
Im using this pump. It is now adjusted to 190cc. A lot of power and much stronge then other super pumps, allso at low rpm. Not very easy to drive, but a lot i think is from my gearbox. I will change to a 722.6 during winter. Then i will report.

S123, OM606, HX40, 8mm Herelevi-pump
https://www.facebook.com/#!/groups/198848373469840/
mercemann
10-02-2012, 01:58 PM #9

Im using this pump. It is now adjusted to 190cc. A lot of power and much stronge then other super pumps, allso at low rpm. Not very easy to drive, but a lot i think is from my gearbox. I will change to a 722.6 during winter. Then i will report.


S123, OM606, HX40, 8mm Herelevi-pump
https://www.facebook.com/#!/groups/198848373469840/

Siekkinen
TA 0301

54
10-05-2012, 01:25 PM #10
They do tractor pulling so they know how to make a pump with high delivery amounts. But unfortunately they don't tell anything about them.

w124 300 STD/daily driver
w202 250 TDT
w201 2.6E
Siekkinen
10-05-2012, 01:25 PM #10

They do tractor pulling so they know how to make a pump with high delivery amounts. But unfortunately they don't tell anything about them.


w124 300 STD/daily driver
w202 250 TDT
w201 2.6E

 
  • 1 Vote(s) - 5 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)