722 Automatic transmission information
722 Automatic transmission information
02-03-2015, 10:24 AM
#54
(06-10-2013, 06:03 AM)EDH_Performance Hi all,
i have an w202 0m605 turbo with a 722.6 gearbox!
My plan is to mount a dieselmeken 8mm mechanical pump and big turbo.
Is there any trix to do this modification and still keep the stock gearbox ecu?
My plan was to keep engine ecu, gearbox ecu and still have the edc guvenor connected and working ( dismantel this from the edc pump, and just have it under the intake)
Will this work? Or do i need a custom ecu for the gearbox?
(06-15-2013, 07:45 AM)Duncansport Custom ECU my be better route. However....
If you use a om602 pump with EDC it has a simple fuel rack position sensor that you may be able to use for the output to the ( throttle position ) Also you would need to leave the throttle pedal sensor hooked up to your throttle pedal to give the EGS a signal. Also you would need to leave the guts of the old edc pump hooked up and working somewhat so no fault codes would be set, which would set the EGS into limp home mode.
Just my thoughts..
If you connect a throttle cable from the 602 pump, piggy backed on to the original throttle pedal or the ECU throttle potentiometer and leave the EDC plugged in then the engine will not know anything is different. I want to do this also, otherwise got to buy Ole's controller and swap.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
(06-10-2013, 06:03 AM)EDH_Performance Hi all,
i have an w202 0m605 turbo with a 722.6 gearbox!
My plan is to mount a dieselmeken 8mm mechanical pump and big turbo.
Is there any trix to do this modification and still keep the stock gearbox ecu?
My plan was to keep engine ecu, gearbox ecu and still have the edc guvenor connected and working ( dismantel this from the edc pump, and just have it under the intake)
Will this work? Or do i need a custom ecu for the gearbox?
(06-15-2013, 07:45 AM)Duncansport Custom ECU my be better route. However....
If you use a om602 pump with EDC it has a simple fuel rack position sensor that you may be able to use for the output to the ( throttle position ) Also you would need to leave the throttle pedal sensor hooked up to your throttle pedal to give the EGS a signal. Also you would need to leave the guts of the old edc pump hooked up and working somewhat so no fault codes would be set, which would set the EGS into limp home mode.
Just my thoughts..
If you connect a throttle cable from the 602 pump, piggy backed on to the original throttle pedal or the ECU throttle potentiometer and leave the EDC plugged in then the engine will not know anything is different. I want to do this also, otherwise got to buy Ole's controller and swap.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Messages In This Thread
722 Automatic transmission information - by ForcedInduction - 06-27-2009, 05:39 AM
RE: 722 Automatic transmission information - by DeliveryValve - 06-29-2009, 10:04 AM
RE: 722 Automatic transmission information - by ForcedInduction - 06-29-2009, 05:02 PM
RE: 722 Automatic transmission information - by Motorhead - 06-29-2009, 11:14 AM
RE: 722 Automatic transmission information - by Tymbrymi - 07-01-2009, 09:16 AM
RE: 722 Automatic transmission information - by GileadGarage - 07-02-2009, 11:28 PM
RE: 722 Automatic transmission information - by GREASY_BEAST - 07-03-2009, 08:55 AM
RE: 722 Automatic transmission information - by Motorhead - 07-03-2009, 09:40 AM
RE: 722 Automatic transmission information - by DeliveryValve - 07-05-2009, 02:44 AM
RE: 722 Automatic transmission information - by Motorhead - 07-05-2009, 04:03 PM
RE: 722 Automatic transmission information - by Telecommbrkr - 07-09-2009, 12:16 AM
RE: 722 Automatic transmission information - by ForcedInduction - 07-14-2009, 04:37 PM
RE: 722 Automatic transmission information - by mcb - 10-16-2009, 04:13 PM
RE: 722 Automatic transmission information - by ForcedInduction - 10-16-2009, 04:27 PM
RE: 722 Automatic transmission information - by peter460332 - 11-23-2009, 11:02 AM
RE: 722 Automatic transmission information - by 95e300dez - 12-05-2009, 11:01 AM
RE: 722 Automatic transmission information - by Syncro_G - 06-24-2010, 10:04 AM
RE: 722 Automatic transmission information - by BRABUS - 08-04-2010, 09:36 AM
RE: 722 Automatic transmission information - by ForcedInduction - 08-04-2010, 06:06 PM
RE: 722 Automatic transmission information - by ForcedInduction - 09-05-2010, 03:44 AM
RE: 722 Automatic transmission information - by timb8022 - 12-18-2010, 02:24 PM
RE: 722 Automatic transmission information - by Jtn190D - 09-07-2010, 03:39 PM
RE: 722 Automatic transmission information - by majesty78 - 09-08-2010, 12:33 PM
RE: 722 Automatic transmission information - by majesty78 - 09-09-2010, 03:38 AM
RE: 722 Automatic transmission information - by denkoleso - 09-18-2011, 04:24 AM
RE: 722 Automatic transmission information - by Jtn190D - 09-10-2010, 08:41 AM
RE: 722 Automatic transmission information - by Taifun - 09-15-2010, 12:43 AM
RE: 722 Automatic transmission information - by w126sdrox - 12-15-2010, 11:22 PM
RE: 722 Automatic transmission information - by ForcedInduction - 12-16-2010, 08:36 AM
RE: 722 Automatic transmission information - by ForcedInduction - 12-18-2010, 06:19 PM
RE: 722 Automatic transmission information - by krashappy - 01-03-2011, 07:41 PM
RE: 722 Automatic transmission information - by Syncro_G - 01-07-2011, 02:31 AM
RE: 722 Automatic transmission information - by casioqv - 01-20-2011, 06:49 PM
RE: 722 Automatic transmission information - by Captain America - 04-25-2011, 10:47 PM
RE: 722 Automatic transmission information - by DeliveryValve - 04-26-2011, 03:02 AM
RE: 722 Automatic transmission information - by Captain America - 04-28-2011, 01:06 AM
RE: 722 Automatic transmission information - by johan84 - 05-19-2011, 01:51 AM
RE: 722 Automatic transmission information - by majesty78 - 05-19-2011, 02:10 AM
RE: 722 Automatic transmission information - by johan84 - 05-20-2011, 04:03 PM
RE: 722 Automatic transmission information - by Captain America - 06-06-2011, 11:53 PM
RE: 722 Automatic transmission information - by tinchariot - 11-24-2011, 01:42 PM
RE: 722 Automatic transmission information - by offroadbakos - 01-12-2012, 11:12 AM
RE: 722 Automatic transmission information - by hansebanger77 - 01-11-2012, 04:40 PM
RE: 722 Automatic transmission information - by TheDon - 02-02-2013, 08:45 PM
RE: 722 Automatic transmission information - by EDH_Performance - 06-10-2013, 06:03 AM
RE: 722 Automatic transmission information - by Duncansport - 06-15-2013, 07:45 AM
RE: 722 Automatic transmission information - by Hario' - 02-03-2015, 10:24 AM
RE: 722 Automatic transmission information - by raidaru - 12-25-2014, 05:45 PM
RE: 722 Automatic transmission information - by erx - 12-25-2014, 05:55 PM
RE: 722 Automatic transmission information - by erx - 06-07-2015, 02:51 PM
RE: 722 Automatic transmission information - by swampmonkey - 01-30-2016, 04:50 PM
RE: 722 Automatic transmission information - by Sultzi - 01-31-2016, 02:36 PM
RE: 722 Automatic transmission information - by erx - 01-31-2016, 05:10 PM
RE: 722 Automatic transmission information - by pit-thiessen - 11-13-2021, 05:55 AM
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)