wanted om603 cyl head or om606 engine
wanted om603 cyl head or om606 engine
06-24-2014, 04:15 PM
#1
Insane190d
06-24-2014, 04:15 PM #1Looking for a good cylinder head for my om603 engine. Dont want #14 head. Or good running om606 engine
06-25-2014, 09:44 AM
#2
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
how much of a rush are you in? I will have a cylinder head from my w126 (not a #14, I think 19 or 22), but i haven't started my swap yet - might be a little while
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
06-25-2014, 02:13 PM
#3
(06-25-2014, 09:44 AM)yatzee how much of a rush are you in? I will have a cylinder head from my w126 (not a #14, I think 19 or 22), but i haven't started my swap yet - might be a little while
Sooner the better but keep me posted. Thanks
Insane190d
06-25-2014, 02:13 PM #3(06-25-2014, 09:44 AM)yatzee how much of a rush are you in? I will have a cylinder head from my w126 (not a #14, I think 19 or 22), but i haven't started my swap yet - might be a little while
Sooner the better but keep me posted. Thanks
07-07-2014, 05:05 PM
#5
I would only consider selling it if it passes a pressure test
This post was last modified: 07-07-2014, 05:06 PM by yatzee.
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
I do have a good #14 in hand - will be sending it out to get tested at some point - came off my 87 that rusted out
I would only consider selling it if it passes a pressure test
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
07-08-2014, 06:43 AM
#6
(07-07-2014, 05:05 PM)yatzee I do have a good #14 in hand - will be sending it out to get tested at some point - came off my 87 that rusted out
I would only consider selling it if it passes a pressure test
Ok im going to get mine tested and if it passes I might put it back on. Its got just a microscopic crack, but if I need a head im gonna wanna #17 or higer. Prettysure was just gasket that went but still perferr a different number head.
Insane190d
07-08-2014, 06:43 AM #6(07-07-2014, 05:05 PM)yatzee I do have a good #14 in hand - will be sending it out to get tested at some point - came off my 87 that rusted out
I would only consider selling it if it passes a pressure test
Ok im going to get mine tested and if it passes I might put it back on. Its got just a microscopic crack, but if I need a head im gonna wanna #17 or higer. Prettysure was just gasket that went but still perferr a different number head.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)