STD Other Projects W202 220D om604 +P

W202 220D om604 +P

W202 220D om604 +P

 
  • 3 Vote(s) - 3.67 Average
 
Pages (4): Previous 1 2 3 4
NZScott
HX30W 73/44mm

398
12-08-2015, 11:44 PM #151
Twincharging can be done either way. My idea is to try fit the biggest blower I can into the engine bay and feed its output into a HE351VE or the like (VGT only for exhaust braking). The OM617 is reverse flow, I'll have enough trouble fitting a HE351 on the exhaust side the other without the M122 on the same (intake) side too! In fact I have my doubts whether a M122 will fit on the other side with the IP and oil filter etc etc...

A big blower will spin slower and not only last longer life wise but output cooler air. I plan on putting a bypass in for when the turbo wants more air the blower can provide. Then the blower is out of the equation, aside from the rotors still being driven (I would love a clutch, but electric clutches stop with the much smaller M62). Much easier to have bypass piping when not near a inlet manifold too.


Sorry to partake in said thread derailment...


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
12-08-2015, 11:44 PM #151

Twincharging can be done either way. My idea is to try fit the biggest blower I can into the engine bay and feed its output into a HE351VE or the like (VGT only for exhaust braking). The OM617 is reverse flow, I'll have enough trouble fitting a HE351 on the exhaust side the other without the M122 on the same (intake) side too! In fact I have my doubts whether a M122 will fit on the other side with the IP and oil filter etc etc...

A big blower will spin slower and not only last longer life wise but output cooler air. I plan on putting a bypass in for when the turbo wants more air the blower can provide. Then the blower is out of the equation, aside from the rotors still being driven (I would love a clutch, but electric clutches stop with the much smaller M62). Much easier to have bypass piping when not near a inlet manifold too.


Sorry to partake in said thread derailment...



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Merc8101
Unregistered

 
10-16-2017, 05:00 AM #152
which fuel pump did you use?
Merc8101
10-16-2017, 05:00 AM #152

which fuel pump did you use?

Pages (4): Previous 1 2 3 4
 
  • 3 Vote(s) - 3.67 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)