STD Tuning Engine 450 hp on om606 with stock exhaust manifold?

450 hp on om606 with stock exhaust manifold?

450 hp on om606 with stock exhaust manifold?

 
  • 0 Vote(s) - 0 Average
 
Joystick
TA 0301

51
03-05-2015, 02:50 AM #1
hello. I wounder if the original exhaust manifold with a t3 flange adapter will be okay with a hx40 ans 7.5mm dieselmeken pump?
Joystick
03-05-2015, 02:50 AM #1

hello. I wounder if the original exhaust manifold with a t3 flange adapter will be okay with a hx40 ans 7.5mm dieselmeken pump?

Booster
GT2559V

240
03-05-2015, 03:03 AM #2
I too would like to know if this will be a problem on my 605, Back pressure might be too much and high egts
Booster
03-05-2015, 03:03 AM #2

I too would like to know if this will be a problem on my 605, Back pressure might be too much and high egts

TurboTim
Holset

457
03-05-2015, 03:50 AM #3
I have stock manifold with hx40/35 and I get 45psi back pressure checked at #4 runner near head. Max boost I can get is maybe 30psi. Would love more boost but just won't happen with stocker and is why I am trying to find someone to build a new manifold

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
03-05-2015, 03:50 AM #3

I have stock manifold with hx40/35 and I get 45psi back pressure checked at #4 runner near head. Max boost I can get is maybe 30psi. Would love more boost but just won't happen with stocker and is why I am trying to find someone to build a new manifold


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

F.R.A.S
Holset

579
03-05-2015, 04:08 AM #4
There are a lot of advantages to go with a proper exhaust manifold. Like spool for one but also the life span of the engine. As TurboTim states here he has a high back pressure reading on one cylinder and that is what causes engine failures. You want all cylinders to be equally hot or cold. Now that's an intake manifold issue to off course but a stock exhaust manifold is just not up for the task of even getting the maximum out of the stock turbo.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
03-05-2015, 04:08 AM #4

There are a lot of advantages to go with a proper exhaust manifold. Like spool for one but also the life span of the engine. As TurboTim states here he has a high back pressure reading on one cylinder and that is what causes engine failures. You want all cylinders to be equally hot or cold. Now that's an intake manifold issue to off course but a stock exhaust manifold is just not up for the task of even getting the maximum out of the stock turbo.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Joystick
TA 0301

51
03-05-2015, 05:32 AM #5
Okay. Who make the cheapest manifold with a t3 flange? Got a price from kkd about 6500 NOK.
Joystick
03-05-2015, 05:32 AM #5

Okay. Who make the cheapest manifold with a t3 flange? Got a price from kkd about 6500 NOK.

F.R.A.S
Holset

579
03-05-2015, 05:58 AM #6
If you are looking at the cheapest option you should go with a home made. We are more expensive then that KKD price you've got.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
03-05-2015, 05:58 AM #6

If you are looking at the cheapest option you should go with a home made. We are more expensive then that KKD price you've got.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Joystick
TA 0301

51
03-05-2015, 06:24 AM #7
I know. But it does not look very easy to make on my self. Are there any private persons who do this? Or have a complete kit to sell?

does this looks Nice? [Image: maxresdefault.jpg]
This post was last modified: 03-05-2015, 06:27 AM by Joystick.
Joystick
03-05-2015, 06:24 AM #7

I know. But it does not look very easy to make on my self. Are there any private persons who do this? Or have a complete kit to sell?

does this looks Nice? [Image: maxresdefault.jpg]

F.R.A.S
Holset

579
03-05-2015, 08:54 AM #8
Does this look nice???

[Image: 20140514_165746.jpg]

Building yourself is not that hard, look at a lot of pictures and take your time. Spot weld it with the MIG if you don't master the TIG and then go to the local welders and let them TIG-weld it for you.

You can buy our billet flanges or a cheap 10mm flange from kl-racing or similar Chinese store. The mandrels I'm sure you can source locally. Good luck.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
03-05-2015, 08:54 AM #8

Does this look nice???

[Image: 20140514_165746.jpg]

Building yourself is not that hard, look at a lot of pictures and take your time. Spot weld it with the MIG if you don't master the TIG and then go to the local welders and let them TIG-weld it for you.

You can buy our billet flanges or a cheap 10mm flange from kl-racing or similar Chinese store. The mandrels I'm sure you can source locally. Good luck.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Joystick
TA 0301

51
03-06-2015, 03:24 PM #9
What is all the threaded things you got in the start of each pipe?
Joystick
03-06-2015, 03:24 PM #9

What is all the threaded things you got in the start of each pipe?

F.R.A.S
Holset

579
03-06-2015, 04:44 PM #10
It's for EGT Big Grin

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
03-06-2015, 04:44 PM #10

It's for EGT Big Grin


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)