STD Tuning Engine i need an hx30 downpipe

i need an hx30 downpipe

i need an hx30 downpipe

 
  • 0 Vote(s) - 0 Average
 
Whizbang
TA 0301

51
03-30-2015, 06:03 PM #1
attaching something to the back of this holset has become thr largest pain on earth. Before i go getting a fab your own outlet thing, anyone have an image of the stock downpipe? Better still.... a stock dp for sale. This is the last thing keeping the car from running.
Whizbang
03-30-2015, 06:03 PM #1

attaching something to the back of this holset has become thr largest pain on earth. Before i go getting a fab your own outlet thing, anyone have an image of the stock downpipe? Better still.... a stock dp for sale. This is the last thing keeping the car from running.

MFSuper90
Budget Builder

1,533
03-31-2015, 10:38 PM #2
I welded a piece of pipe onto
The turbo then onto that support bracket that the downpipe bolts to. If I had more time I probably would have built my own 3" downpipe

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
03-31-2015, 10:38 PM #2

I welded a piece of pipe onto
The turbo then onto that support bracket that the downpipe bolts to. If I had more time I probably would have built my own 3" downpipe


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

F.R.A.S
Holset

579
04-01-2015, 01:49 AM #3
??? A downpipe is just a pipe. It's like the most easy thing to fabricate ever. Just buy some 3" pipe in the hardware store... Am I misunderstanding something here? What are you asking?

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
04-01-2015, 01:49 AM #3

??? A downpipe is just a pipe. It's like the most easy thing to fabricate ever. Just buy some 3" pipe in the hardware store... Am I misunderstanding something here? What are you asking?


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

svenr
OM605

18
04-01-2015, 06:44 AM #4
I was thinking the same thing, just buy 3inch diameter or whatever pipe needed and same diameter v band flange+clamp Smile Weld them togheter and you have your own custom downpipe.
This post was last modified: 04-01-2015, 06:46 AM by svenr.
svenr
04-01-2015, 06:44 AM #4

I was thinking the same thing, just buy 3inch diameter or whatever pipe needed and same diameter v band flange+clamp Smile Weld them togheter and you have your own custom downpipe.

Hario'
C300TD Wagon (W202)

894
04-02-2015, 07:04 AM #5
Straight bit, bend, straight bit, bend, longer straight bit, bend..




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
04-02-2015, 07:04 AM #5

Straight bit, bend, straight bit, bend, longer straight bit, bend..





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)