Login

Greazzer · 08-25-2015, 12:31 PM

Looking at getting rid of the molding altogether.

I look at new cars and they have no molding. I look at custom cars and older high-end cars and they have no molding.

Does anyone have any pictures of a W123 without molding?

Also, looked at recessed / shaved door handles. Not sure on that one yet. Any snappies out there on this one too?

EmJay · 08-25-2015, 01:08 PM

If you decide to get rid of the moulding, I could use some of the clips for the driver door

Greazzer · 08-25-2015, 01:54 PM

Those red buttons? I have a bunch of them, enough for one piece of molding if you want them if I go that route. They are only .10 a pop or so new.

Simpler=Better · 08-25-2015, 02:19 PM

The official term is *red monkey assholes*.

Someone on STD or PP was running a w123 with no cladding, I think jenryus? The guy with the hillbilly w/ bugeyes as his avatar.

EmJay · 08-25-2015, 02:27 PM

I have the red ones, I need the black ones to shove into the red ones.

Greazzer · 08-25-2015, 08:09 PM

(08-25-2015, 02:19 PM)Simpler=Better Wrote: The official term is *red monkey assholes*.

Someone on STD or PP was running a w123 with no cladding, I think jenryus? The guy with the hillbilly w/ bugeyes as his avatar.

I think I know who you mean, but the spelling of the name is off a hair. I will stumble into him. Thanks Ryan.

MFSuper90 · 08-26-2015, 08:53 PM

I've seen one as well, but can't remember who did away with it...
I kinda like mine because it keeps my doors from all dinged up.

EmJay · 08-27-2015, 08:20 AM

Thought I saw a 85 350SDL that didn't have any at PullAPart

bt1211 · 10-24-2015, 07:26 PM

here is a CD pic that I took off the web. Mi[img]file:///C:/Documents%20and%20Settings/Brian/My%20Documents/My%20Pictures/Coupe.JPG[/img]ne is also shaved but it aint ready to post[img]file:///C:/Documents%20and%20Settings/Brian/My%20Documents/My%20Pictures/Coupe.JPG[/img]

Greazzer · 10-24-2015, 07:47 PM

Thanks ! I like it ... Wonder if that blasted drip edge / "A" pillar molding could be shaved off too?

bt1211 · 10-24-2015, 07:52 PM

yea, it could but that would be quite the gap to weld and lead. I did it on my 911 a few years back and to this day I still worry when its going to crack

The 4 door looks very Rolls Royce-ish in the last pic

Greazzer · 10-25-2015, 08:16 AM

Thanks again ! I like the shaved look ... even getting rid of the very bottom molding looks good.

BTW, when you welded over the "A" pillar - gutter molding/drip edge, was it simply just one weld, or was it more involved? It's been around 4 years since I had to remove and replace that molding and I only recall a pinch weld at the top - roof line.

bt1211 · 10-25-2015, 12:09 PM

It took a long time cause I did a little at a time, so I wouldn't warp it. At the time my skills were not that good but it was something I could manage if I did a section at a time

It was the first time I leaded but it was pretty easy. Lots of how to videos on the web

bricktron · 02-18-2016, 01:51 AM

[Image: 1484905d1434317600-w123-official-photo-g...-trim4.jpg]

(^^ not my car)

i have gone a ways down this road too. pretty content by this point running with no body trim at all but i haven't filled the holes. even the A/C pillar trim is gone and i don't miss it. a couple of funky body features are revealed this way but what are you gonna do.

erio · 04-04-2017, 07:37 PM

this is mine

Login
Username:
Password:	Lost Password?
	Remember me