STD Tuning Engine Holseth HX30W Pressure side V-band

Holseth HX30W Pressure side V-band

Holseth HX30W Pressure side V-band

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
minim
Find
K26-2

41
10-04-2015, 04:11 PM #1
Reply
Reply
Anyone got an idea of what clamps to use on the Holseth HX30W on the pressurised air output? It looks like something between 2.25" and 2.5" but I'm having a hard time finding something that fits.

[Image: IMG_1303.JPG]
[Image: IMG_1304.JPG]
[Image: IMG_1305.JPG]
[Image: IMG_1306.JPG]

Some size info sheet I found at frozenboost for reference.
[Image: vband_ring_specsheet.gif]
minim
10-04-2015, 04:11 PM #1

Anyone got an idea of what clamps to use on the Holseth HX30W on the pressurised air output? It looks like something between 2.25" and 2.5" but I'm having a hard time finding something that fits.

[Image: IMG_1303.JPG]
[Image: IMG_1304.JPG]
[Image: IMG_1305.JPG]
[Image: IMG_1306.JPG]

Some size info sheet I found at frozenboost for reference.
[Image: vband_ring_specsheet.gif]

Reply
Reply
TurboTim
Find
Holset

457
10-05-2015, 06:42 AM #2
Reply
Reply
I just ground mine down and used regular silicone coupler. You can find that elbow on ebay though if you look.
This post was last modified: 10-05-2015, 06:42 AM by TurboTim.
87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
10-05-2015, 06:42 AM #2

I just ground mine down and used regular silicone coupler. You can find that elbow on ebay though if you look.

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

Reply
Reply
MFSuper90
Find
Budget Builder

1,533
10-05-2015, 11:08 AM #3
Reply
Reply
I welded a pipe onto mine so I could use a silicone adapter. So basically the same as turbo tim
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
10-05-2015, 11:08 AM #3

I welded a pipe onto mine so I could use a silicone adapter. So basically the same as turbo tim

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Reply
Reply
Tito
Find
Holset

354
10-05-2015, 02:30 PM #4
Reply
Reply
I also ground mine down to a little hump so the hose couldn't pop off.
This post was last modified: 10-05-2015, 02:31 PM by Tito.
Tito
10-05-2015, 02:30 PM #4

I also ground mine down to a little hump so the hose couldn't pop off.

Reply
Reply
minim
Find
K26-2

41
10-05-2015, 05:02 PM #5
Reply
Reply
http://m.ebay.com/itm/121389328525?_trkp...mwBanner=1

Something like this then? Was going to use 2.5 Pressure piping.
minim
10-05-2015, 05:02 PM #5

http://m.ebay.com/itm/121389328525?_trkp...mwBanner=1

Something like this then? Was going to use 2.5 Pressure piping.

Reply
Reply
Tito
Find
Holset

354
10-06-2015, 01:15 AM #6
Reply
Reply
That should work fine.
Tito
10-06-2015, 01:15 AM #6

That should work fine.

Reply
Reply
Hario'
Find
C300TD Wagon (W202)

894
10-06-2015, 06:02 AM #7
Reply
Reply
You need a 2.5" V-band clamp..



Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Hario'
10-06-2015, 06:02 AM #7

You need a 2.5" V-band clamp..




Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]

Reply
Reply
minim
Find
K26-2

41
10-06-2015, 06:53 AM #8
Reply
Reply
According to the document I attached the 2.5" is 1" to big..
minim
10-06-2015, 06:53 AM #8

According to the document I attached the 2.5" is 1" to big..

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)