606 valve stem seals

STD Tuning Engine 606 valve stem seals

View a Printable Version

0 Vote(s) - 0 Average

polarisrmk

603 95' 124 WAGON

78

01-23-2017, 09:29 PM #1

99 606 turbo does anyone know if the intake and exhaust valves stem seals are different or the same? I am getting mixed information some places say they are different but The epc says they are all the same seal. I would get factory ones but would cost $300 just for valve stem seals.

polarisrmk

01-23-2017, 09:29 PM #1

barrote

Superturbo

1,627

01-24-2017, 06:30 AM #2

They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.

FD,
Powered by tractor fuel

barrote

01-24-2017, 06:30 AM #2

They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.

FD,
Powered by tractor fuel

polarisrmk

603 95' 124 WAGON

78

01-24-2017, 11:32 AM #3

(01-24-2017, 06:30 AM)barrote They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.

THANKS!

polarisrmk

01-24-2017, 11:32 AM #3

(01-24-2017, 06:30 AM)barrote They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.

THANKS!

AlanMcR

mind - blown

400

01-24-2017, 05:12 PM #4

Some of the early NA models had different size valve stems (intake vs. exhaust). On the turbo, they made the stems all the same size.

AlanMcR

01-24-2017, 05:12 PM #4

Some of the early NA models had different size valve stems (intake vs. exhaust). On the turbo, they made the stems all the same size.

barrote

Superturbo

1,627

01-25-2017, 05:18 AM #5

Right its 7mm intead of 6 . Good point.
Sorry .

FD,
Powered by tractor fuel

barrote

01-25-2017, 05:18 AM #5

Right its 7mm intead of 6 . Good point.
Sorry .

FD,
Powered by tractor fuel

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)