om601 2.3 turbodiesel power limit
om601 2.3 turbodiesel power limit
I have tuned a 2.3 N/A version of 601, namely the .9 for a sprinter pick up van.
Well the original pump is fitted with 5.5 elements able of about 60ml max... no way to go there. So i've build a 7mm pump based on the ford engine. It went from a sleeper to a spinning wheels in 2nd gear.
This engine has very week rods, as it evolved from the 601.1, wich is the well known 2 liter found in 190D's, So keep that in mind, nevertheless one can fit it with better rods and even the 604 head assy.
601.8 wich is the turbo 2.3 has a 6mm pump but this pump does not go over 70ml as they are not same elements as in 605's and 6's.
But all this 4 cyl pumps can be modded to have 150cc outputs...just cost money.
Anything else pm me .
Regards
FD,
Powered by tractor fuel
Hum...
I have tuned a 2.3 N/A version of 601, namely the .9 for a sprinter pick up van.
Well the original pump is fitted with 5.5 elements able of about 60ml max... no way to go there. So i've build a 7mm pump based on the ford engine. It went from a sleeper to a spinning wheels in 2nd gear.
This engine has very week rods, as it evolved from the 601.1, wich is the well known 2 liter found in 190D's, So keep that in mind, nevertheless one can fit it with better rods and even the 604 head assy.
601.8 wich is the turbo 2.3 has a 6mm pump but this pump does not go over 70ml as they are not same elements as in 605's and 6's.
But all this 4 cyl pumps can be modded to have 150cc outputs...just cost money.
Anything else pm me .
Regards
FD,
Powered by tractor fuel
2 Guest(s)
2 Guest(s)