om601 2.3 turbodiesel power limit

STD Tuning Engine om601 2.3 turbodiesel power limit

View a Printable Version

0 Vote(s) - 0 Average

vica153

GT2256V

105

11-18-2021, 06:10 PM #16

That's good info to know. My hesitation about going over 225lb-ft on a 601 was based on the idea that the rods might be the same as the 603 that had bending issues. If they're revised sturdy rods then the 601 is likely safe to 300lb-ft.

vica153

11-18-2021, 06:10 PM #16

View a Printable Version

0 Vote(s) - 0 Average

Messages In This Thread

om601 2.3 turbodiesel power limit - by SkauneJohan - 09-12-2021, 04:12 PM

RE: om601 2.3 turbodiesel power limit - by Steve77 - 10-08-2021, 09:39 PM

RE: om601 2.3 turbodiesel power limit - by Steve77 - 11-03-2021, 02:21 PM

RE: om601 2.3 turbodiesel power limit - by vica153 - 11-03-2021, 03:23 PM

RE: om601 2.3 turbodiesel power limit - by barrote - 11-04-2021, 03:31 AM

RE: om601 2.3 turbodiesel power limit - by vica153 - 11-04-2021, 11:53 AM

RE: om601 2.3 turbodiesel power limit - by Petar - 11-04-2021, 11:55 AM

RE: om601 2.3 turbodiesel power limit - by barrote - 11-08-2021, 05:43 AM

RE: om601 2.3 turbodiesel power limit - by baldur - 11-08-2021, 07:50 AM

RE: om601 2.3 turbodiesel power limit - by Petar - 11-09-2021, 11:30 AM

RE: om601 2.3 turbodiesel power limit - by vica153 - 11-04-2021, 06:45 PM

RE: om601 2.3 turbodiesel power limit - by Steve77 - 11-06-2021, 12:07 PM

RE: om601 2.3 turbodiesel power limit - by vica153 - 11-09-2021, 12:40 PM

RE: om601 2.3 turbodiesel power limit - by barrote - 11-10-2021, 02:36 AM

RE: om601 2.3 turbodiesel power limit - by Petar - 11-18-2021, 01:31 PM

RE: om601 2.3 turbodiesel power limit - by vica153 - 11-18-2021, 06:10 PM

RE: om601 2.3 turbodiesel power limit - by barrote - 11-19-2021, 03:00 AM

Users browsing this thread:
2 Guest(s)