OM606.962 hard starting
OM606.962 hard starting
Those look like the default settings you put in the DSL1, Baldur. I did go ahead and increase all the pre start times from 0C and lower by 100% and still no start. I have 6 healthy glow plugs in it and a new filter. I may have a restriction in the fuel delivery system. I'm still using the OE f150 lift pump and return line and am checking the fuel supply pressure at the engine next. I have been running this unregulated setup for about 2 years now, so might have burned up the lift pump from constant running. Would it be best for me to eliminate the f150 lift pump altogether since the w210 never had one and rely on the pump inside the IP? I don't like relying on the scavenger pump because of keeping it primed and air out.