OM606.962 hard starting
OM606.962 hard starting
12-18-2021, 11:12 AM
#14
barrote Hy ,
This fuel circuit on the 606 is quite a odd thing...
The valve on the banjo has much more to do with preventing line bleeding than regulation... as if one looks carefully to the lift pump soon find out it is kind of self regulated.
The only thing required when using a electrical lift , is to avoid pipe bursting. In case u use high flow unit like 044 a fuel pressure regulator is required, or if u want to complicate a litle a pulse wave regulador dependent on press.
As most elec pumps are self regulated u dont need to worry as the 606 pump has nothing that can be harmed if u run 5 bar in the gallery...
Hope it helps
Regards
thanks barrette. Do all your comments take into account the original 1997 f150 lift pump? It is controlled by a driver mounted on the frame rail and the gas engine had a regulator on the fuel rail on the engine. I have eliminated the regulator when going diesel as well as the driver. my research indicates a 5-70% duty cycle is what the pump should run. None of the other posts have agreed 5 bar pressure would not cause problem so I am still confused.
This post was last modified: 12-18-2021, 11:16 AM by 50harleyrider.
50harleyrider
12-18-2021, 11:12 AM #14barrote Hy ,
This fuel circuit on the 606 is quite a odd thing...
The valve on the banjo has much more to do with preventing line bleeding than regulation... as if one looks carefully to the lift pump soon find out it is kind of self regulated.
The only thing required when using a electrical lift , is to avoid pipe bursting. In case u use high flow unit like 044 a fuel pressure regulator is required, or if u want to complicate a litle a pulse wave regulador dependent on press.
As most elec pumps are self regulated u dont need to worry as the 606 pump has nothing that can be harmed if u run 5 bar in the gallery...
Hope it helps
Regards
thanks barrette. Do all your comments take into account the original 1997 f150 lift pump? It is controlled by a driver mounted on the frame rail and the gas engine had a regulator on the fuel rail on the engine. I have eliminated the regulator when going diesel as well as the driver. my research indicates a 5-70% duty cycle is what the pump should run. None of the other posts have agreed 5 bar pressure would not cause problem so I am still confused.
Messages In This Thread
OM606.962 hard starting - by 50harleyrider - 12-09-2021, 04:32 PM
RE: OM606.962 hard starting - by barrote - 12-09-2021, 06:26 PM
RE: OM606.962 hard starting - by 50harleyrider - 12-10-2021, 10:22 AM
RE: OM606.962 hard starting - by barrote - 12-11-2021, 05:03 AM
RE: OM606.962 hard starting - by baldur - 12-12-2021, 08:10 PM
RE: OM606.962 hard starting - by 50harleyrider - 12-14-2021, 07:38 AM
RE: OM606.962 hard starting - by 50harleyrider - 12-14-2021, 08:06 AM
RE: OM606.962 hard starting - by baldur - 12-14-2021, 10:58 AM
RE: OM606.962 hard starting - by 50harleyrider - 12-16-2021, 05:53 PM
RE: OM606.962 hard starting - by baldur - 12-17-2021, 10:27 AM
RE: OM606.962 hard starting - by TE27Levin - 12-14-2021, 02:44 PM
RE: OM606.962 hard starting - by 50harleyrider - 12-17-2021, 12:01 PM
RE: OM606.962 hard starting - by baldur - 12-18-2021, 08:10 PM
RE: OM606.962 hard starting - by barrote - 12-18-2021, 04:35 AM
RE: OM606.962 hard starting - by 50harleyrider - 12-18-2021, 11:12 AM
RE: OM606.962 hard starting - by WSchotty - 12-18-2021, 03:53 PM
RE: OM606.962 hard starting - by 50harleyrider - 12-19-2021, 05:29 PM
RE: OM606.962 hard starting - by barrote - 12-20-2021, 03:02 AM
RE: OM606.962 hard starting - by 50harleyrider - 12-20-2021, 08:07 AM
RE: OM606.962 hard starting - by X Double Dot - 12-20-2021, 09:32 AM
RE: OM606.962 hard starting - by 50harleyrider - 12-20-2021, 10:27 PM
RE: OM606.962 hard starting - by 50harleyrider - 12-22-2021, 04:41 PM
RE: OM606.962 hard starting - by TE27Levin - 12-23-2021, 04:33 PM
RE: OM606.962 hard starting - by 50harleyrider - 01-20-2022, 09:18 AM
RE: OM606.962 hard starting - by 50harleyrider - 01-24-2022, 01:44 PM
RE: OM606.962 hard starting - by barrote - 01-25-2022, 04:06 AM
RE: OM606.962 hard starting - by 50harleyrider - 01-26-2022, 11:15 AM
RE: OM606.962 hard starting - by baldur - 01-26-2022, 12:50 PM
RE: OM606.962 hard starting - by barrote - 01-27-2022, 05:06 AM
RE: OM606.962 hard starting - by baldur - 01-27-2022, 06:10 AM
RE: OM606.962 hard starting - by 50harleyrider - 01-29-2022, 12:43 PM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)