OM606.962 hard starting
OM606.962 hard starting
Hy, orings leak... but often the leak is on the solenoid.
Wich was build with repair in mind. It need some ingenuity but u can repair it.
Look and u can see a round face just parallel to the pump inlet , its a 25mm round tap, bordered with 2 small holes 2mm . this tap can be removed as it is just force pressed in, often it can be removed by holding the cover throug the holes with a plyers. around it is a oring thats where they often leak. REplace by a vuiton one and it becomes for life.
Or use a flat screw driver to get it out ... or other ingenious means
Good luck