+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: Selling everything (/showthread.php?tid=5163)
Pages:
1
2
RE: Selling everything - JustPassinThru - 02-21-2014
(02-21-2014, 08:08 PM)zeeman Pics and prices of the intakes left?
Top manifold is from a 1979 300TD naturally-aspirated wagon, no EGR port, part number is 617 141 07 01. $60 shipped.
Bottom manifold is from a 1978 300SDL, the identical manifold was also used on the 1978 and '79 300SD, no EGR port, part number is 617 098 01 07.
***reduced price: $40 shipped.***
RE: Selling everything - zeeman - 02-21-2014
(02-21-2014, 09:26 PM)JustPassinThru(02-21-2014, 08:08 PM)zeeman Pics and prices of the intakes left?
Top manifold is from a 1979 300TD naturally-aspirated wagon, no EGR port, part number is 617 141 07 01. $60 shipped.
Bottom manifold is from a 1978 300SDL, the identical manifold was also used on the 1978 and '79 300SD, no EGR port, part number is 617 098 01 07. $50 shipped.
First $100 takes 'em both.
I will take the top manifold.
Selling everything: 16-inch steering wheel / old stickshift / German snow chains - JustPassinThru - 02-22-2014
I don't remember, because I pulled it so long ago and didn't label it, but I *think* this is out of a W202, circa 1999. I do remember, I was pretty excited when I found it, and had a devil of a time pulling it. Grip is intact though has slight pressure indentations at 8 o'clock and 10 o'clock. There's a little bit of rotation about the rim when you grip it. So drill and pin it and put a leather wrap around it. Other than the loose grip it is undamaged, and yes the airbag is in it. Not responsible if you get killed through stupidity when installing it. $65 if local pickup, $100 shipped. ...um, come to think of it, *can* one ship an airbag???
It's 8 inches long. I have no idea what it came out of. I found it in the back seat of a 240D. The perfectionist will want to refinish it. $25 shipped.
Unfortunately, these are not for a Mercedes; I bought these in 1995 for my Volkswagen Golf in Heidelberg. If memory serves, they're for 195/60 R14's. But, of course, who says you have to store *these* tire chains in this bag? The bag is approximately 18" high (including handle) and 17" wide. I'll leave you the pleasure of cleaning 19 years' worth of trunk grime off of it.
Just the bag (includes German instructions)...$75 shipped.
With chains......................................................$110 shipped.
Selling everything: fifteen bad injectors / shims kit - JustPassinThru - 02-22-2014
135 bar injectors, the ones without rubber bands are all Bosch and I think they all are. Pulled from OM617 turbo cars; every single one of them either pops too low or has a bad spray pattern or both; four of them don't spray at all. Candidates for overhaul. Make me an offer.
This is the shims kit Kent Bergsma was selling in September of 2011, equivalent to this one today:
https://mercedessource.com/store/variable-24-pc-diesel-fuel-injector-pressure-adjustment-shim-washer-kit
(Photo, at bottom of this post)
Condition is as new, I never used this set. $40 shipped. zeeman has first dibs on this, for 24 hours, since he didn't get any crush washers with his nozzles. Sorry, no crush washers included in this kit.
The remaining non-EGR 1978 OM617 turbo intake manifold, price is reduced to $40 shipped.
Kent Bergsma's Cleaning Kit for Diesel Fuel Injectors,
https://mercedessource.com/store/top-brass-custom-cleaning-kit-diesel-fuel-injectors-designed-kent-bergsma
missing the thin pin, condition very nearly new, $35 shipped.
RE: Selling everything - zeeman - 02-23-2014
[quote='JustPassinThru' pid='61143' dateline='1393052353']
135 bar injectors, the ones without rubber bands are all Bosch and I think they all are. Pulled from OM617 turbo cars; every single one of them either pops too low or has a bad spray pattern or both; four of them don't spray at all. Candidates for overhaul. Make me an offer.
This is the shims kit Kent Bergsma was selling in September of 2011, equivalent to this one today:
https://mercedessource.com/store/variable-24-pc-diesel-fuel-injector-pressure-adjustment-shim-washer-kit
(Photo, at bottom of this post)
Condition is as new, I never used this set. $40 shipped. zeeman has first dibs on this, for 24 hours, since he didn't get any crush washers with his nozzles. Sorry, no crush washers included in this kit.
The remaining non-EGR 1978 OM617 turbo intake manifold, price is reduced to $40 shipped.
Kent Bergsma's Cleaning Kit for Diesel Fuel Injectors,
https://mercedessource.com/store/top-brass-custom-cleaning-kit-diesel-fuel-injectors-designed-kent-bergsma
missing the thin pin, condition very nearly new, $35 shipped.
[/quote
I will take the shims.
Zeeman
RE: Selling everything - lgreeley83 - 02-23-2014
Of course with a lemon head. That is how you know it's legit.
RE: Selling everything - zeeman - 02-23-2014
(02-23-2014, 03:09 PM)lgreeley83 Of course with a lemon head. That is how you know it's legit.
I always have to give Kaia shit if I don't get a lemmon head with my order!!!
Selling everything: tool pouch - JustPassinThru - 02-25-2014
What you see is what you get. $75 shipped. Yes, it does say "MERCEDES-BENZ" and has the tri-star logo on the back. Probably could stand to be soaked overnight in Oxi-Clean, but I'd try it first on one you don't care about.
RE: Selling everything - 2996 - 02-25-2014
Good seller! Item was very well packaged, and arrived safely
RE: Selling everything - winequip_td - 02-26-2014
Do you still have any 603 pumps? I'm looking for a core.
RE: Selling everything - CRD4x4 - 02-26-2014
X2
(02-25-2014, 06:42 PM)2996 Good seller! Item was very well packaged, and arrived safely
RE: Selling everything - JustPassinThru - 02-26-2014
(02-26-2014, 12:52 AM)winequip_td Do you still have any 603 pumps? I'm looking for a core.
Maybe. I'll look later today.
RE: Selling everything - JustPassinThru - 02-26-2014
(02-26-2014, 12:52 AM)winequip_td Do you still have any 603 pumps? I'm looking for a core.
Nope, the only two injector pumps I have left are for OM617, they are both MW pumps. I'll sell each for ***EDITED $100*** shipped, for use as cores, though for all I know they might be perfectly good.
RE: Selling everything - DeliveryValve - 03-03-2014
X3, also note very fair on prices!
(02-26-2014, 10:57 AM)CRD4x4 X2
(02-25-2014, 06:42 PM)2996 Good seller! Item was very well packaged, and arrived safely
RE: Selling everything - JustPassinThru - 03-03-2014
(03-03-2014, 04:35 PM)DeliveryValve X3, also note very fair on prices!
(02-26-2014, 10:57 AM)CRD4x4 X2
(02-25-2014, 06:42 PM)2996 Good seller! Item was very well packaged, and arrived safely
Thanks all! The checks are in the mail
RE: Selling everything - JustPassinThru - 03-17-2014
Odds and ends. Make me an offer:
Tool pouch only, like #58 but without the tools.
Sanden AC compressor, the good one, new, never used, you'll need the special bracket the fellow was selling over on PP (or, fabricate one yourself).
ATe brake booster, appears to be a recent service replacement.
240D dashboard (has the hole to the left of the steering column), black, one very slight crack by the right speaker, missing one vent nozzle, otherwise flawless, includes good glovebox and I have the key to it. Zebrano trim is excellent.
Palomino armrest with sheepskin cover.
Pix on request.
RE: Selling everything - john - 03-18-2014
hoodbra still there? pic? price for shipping to sweden??
Its cold here, my wagon needs some wind protection!
RE: Selling everything - JustPassinThru - 03-18-2014
(03-18-2014, 05:44 AM)john hoodbra still there? pic? price for shipping to sweden??
Its cold here, my wagon needs some wind protection!
Front side:
Back side:
It's a custom Colgan nose bra for W123. NOTE however, that the license plate hole is designed for a US license plate, not European.
The fellow who sold it to me said it was used only once. It is perfectly clean. It has been folded in a box, so you might want to carefully use a steam iron on it.
If you still want it, PM me your address so I can calculate shipping.