+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Garrett 712120 VNT Hella 6NW 008 412 actuator. (/showthread.php?tid=614)
RE: Garrett 712120 VNT Hella 6NW 008 412 actuator. - Iangiulu - 07-12-2014
(07-10-2014, 02:06 PM)Iangiulu Hi, I need your help. Did you know if this is working for the MB actuator?
No one?
RE: Garrett 712120 VNT Hella 6NW 008 412 actuator. - Darqs - 12-18-2014
(07-12-2014, 02:42 PM)Iangiulu Hi, I need your help. Did you know if this is working for the MB actuator?
Yes... if only PWM freq=140Hz.
Best regards,
Darqs
RE: Garrett 712120 VNT Hella 6NW 008 412 actuator. - antonmies - 01-23-2015
What type of soldering there is in the leads from the PCB to housing?
There is a broken lead in a servo I'm trying to fix, but the solder I use doesn't seem to stick. Just floats on the surface as a metal ball...
RE: Garrett 712120 VNT Hella 6NW 008 412 actuator. - HoleshotHolset - 04-15-2015
(01-23-2015, 06:43 AM)antonmies What type of soldering there is in the leads from the PCB to housing?
There is a broken lead in a servo I'm trying to fix, but the solder I use doesn't seem to stick. Just floats on the surface as a metal ball...
The leads are spot welded from the factory.
I tried soldering these using rosin core solder and flux and did not have any luck.
Attached is a picture of a rather poor attempt at fixing the leads on a "good used" actuator I bought from a gent on another forum.
Beers,
Matt