W210 200 CDI, 200-250 HP/ 450-500 Nm

W210 200 CDI, 200-250 HP/ 450-500 Nm - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: W210 200 CDI, 200-250 HP/ 450-500 Nm (/showthread.php?tid=6548)

Pages: 1 2 3 4

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - MartinB - 07-11-2017

Nice. What´s your power target?

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - tuikku - 07-11-2017

(07-11-2017, 10:12 AM)MartinB Nice. What´s your power target?

Something between 500-600.

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - starynovy - 12-13-2017

[Image: 295pm6b.jpg]

We decided to do dyno run before it breaks altough program is giving problems with fuel pressure. Only stock 1350Bar... some 15% of power still missing. As is it gives 185kW (250HP) at crank and 500Nm.

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - MartinB - 12-13-2017

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - MartinB - 12-16-2017

And 50-200 with slow shifting. 100-200 15.2s

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - street_666 - 12-19-2017

(06-04-2015, 01:52 PM)MartinB CP3 pump is at home

Whats the timing chain cover number?

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - sorin_cel - 01-14-2018

(12-16-2017, 03:11 AM)MartinB And 50-200 with slow shifting. 100-200 15.2s

That's really quick for 4 cylinder CDI!

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - MartinB - 04-17-2018

Some updates:

3" exhaust and new 716.654 gearbox - after I broked up the original gearbox Big Grin

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - datvi55 - 03-24-2019

hi
OM 611
I have a W202 C200 CDI working properly, but it is very slow
my w202 1998
ECU is bosch 0281001818, is it possible to flash?
turbo: garrett 700625-1
AG110960099

Please help me get it easily at 150 Hp and then later at 200 HP, this will be enoug

In this video, you see a similar Diesel W202, Overtaking: D

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - Ge7_RiGhT - 06-26-2019

Can u tell me more about the clutch (from what sprinter is it) and brakes (rear brakes from what it is) and are u running with dual brake servo?

RE: W210 200 CDI, 200-250 HP/ 450-500 Nm - dcm - 08-27-2019

(07-26-2015, 12:21 PM)MartinB Feed pump is inside of CP3 pump.

Very cool project, I am currently starting my own build!

So you are not using any external electric feed pump, CP3 is ok on its own?