+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: is this K26 the right one for 617a (/showthread.php?tid=1059)
is this K26 the right one for 617a - kmaser - 01-21-2010
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300305528868&ssPageName=ADME:X:AAQ:MOTORS:1123
I have been looking at this ebay turbo and it looks to be a kkk K26 turbo but I was wondering what the 4 bolt piece is on the side of the air outlet is which looks to have an extra port to plug a line into, I've seen some other K26's but they did not have this.
Kurtis
RE: is this K26 the right one for 617a - ForcedInduction - 01-21-2010
That would be it, but $260 is a ridiculously high price.
The device on the compressor is an ARV. It reduces boost pressure to increase EGR flow. The stock air filter housing will not fit a turbo with one, the 84-85 filter housing has a dent in the outlet tube to clear it.
RE: is this K26 the right one for 617a - kmaser - 01-21-2010
What would be a fair price for one without the manifold ?
RE: is this K26 the right one for 617a - ForcedInduction - 01-22-2010
About $100 in good condition.