STD
Help OIL Leak??? - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Maintenance (https://www.superturbodiesel.com/std/forumdisplay.php?fid=22)
+--- Forum: General (https://www.superturbodiesel.com/std/forumdisplay.php?fid=4)
+--- Thread: Help OIL Leak??? (/showthread.php?tid=1112)



Help OIL Leak??? - W116Lorinser - 02-05-2010

i just installed my k26 turbo today to replace the older turbo. after 30 years of baked on bolts and other things i finally got it replaced and installed. i dont know what the peice is called but it the peice that right on top of the turbo with the 2 bolts and has a small gasket on it. the little gasket broke so i threw it away without a replacement and just tighted the bolts up and used the "gasket making silicone" from autozone. After i started the car it started to leak right away out the sides.

is this because it specifically needs that gasket? and where do i find this gasket?


ps. is this the peice? and its the turbo drain? will a new one stop the leak?
http://www.autopartswarehouse.com/details/QQMercedes_BenzQQ300SDQQVictor_ReinzQQTurbo_Drain_GasketQQ19781985QQW0133-1643939.html?apwcid=P1135867996W43b3f85c7ab9e&gan=1&apwidMjZ5S86


RE: Help OIL Leak??? - Rudolf_Diesel - 02-05-2010

That is the oil feed for the turbo. You can just buy some gasket material and cut one out. I would stay away from silicone on anything that is involved with the oiling system. I once had a Datsun that had silicone block a passage and snapped the cam. You could even use a cereal box for the gasket material in a pinch.


RE: Help OIL Leak??? - W116Lorinser - 02-05-2010

so its leaking because no gasket... correct?

and it not something wrong because of the new turbo right? just getting paranoid when i see leaks... i always think the worst.


RE: Help OIL Leak??? - willbhere4u - 02-05-2010

It needs a gasket in there! It has high pressure oil in there to lubricate it


RE: Help OIL Leak??? - Rudolf_Diesel - 02-05-2010

^^What he said - at 3 Bar you have 43.5 psi give or take. Most likely it is leaking because you do not have a gasket.


RE: Help OIL Leak??? - W116Lorinser - 02-06-2010

But the exact same piece below the turbo doesnt have a gasket? Only the top one does?


RE: Help OIL Leak??? - Rudolf_Diesel - 02-06-2010

(02-06-2010, 10:30 AM)W116Lorinser But the exact same piece below the turbo doesnt have a gasket? Only the top one does?

They both should have a gasket, but the other side is not pressure fed, it is the drain line.


RE: Help OIL Leak??? - W116Lorinser - 02-06-2010

what about these oil drain and retun kits on ebay ? they look nice and say they will work better? can it work as replacement?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120526944164&ssPageName=STRK:MEWAX:IT


RE: Help OIL Leak??? - willbhere4u - 02-06-2010

It wont add any performance the stock parts work just fine for the stock turbo!

Those kits are more useful if you plan on putting a non stock turbo on there!