+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: 5 Spd for 80 300D in a 300CD (/showthread.php?tid=1883)
5 Spd for 80 300D in a 300CD - Oil Burner - 10-21-2010
I have been reading all the threads in this section and there is allot of information but I am confused...you guys like the numbers and abreviations.
Can I get a few questions awnsered.
1. Is there a 5 spd Man Trans with OD that will bolt to a 83 300D
2. What do you do for the Pedal assembly? Conversion or buy erupean parts?
4. Has anyone actually accomplished this conversion if you have what did it take: parts and cost.
Thanks you guys, you know your MB stuff I will give you that
RE: 5 Spd for 89 300D in a 300CD - ForcedInduction - 10-21-2010
(10-21-2010, 05:08 PM)Oil Burner 1. Is there a 5 spd Man Trans with OD that will bolt to a 83 300DYes, an extremely rare one. All that exist in the USA came as part of a complete vehicle that was a special import.
Quote:2. What do you do for the Pedal assembly? Conversion or buy erupean parts?Any pedal assembly from a 240D.
Quote:4. Has anyone actually accomplished this conversion if you have what did it take: parts and cost.Conversion is easy, same as doing a 4-speed but cutting the driveshaft a few inches shorter and using a different support crossmember.
RE: 5 Spd for 89 300D in a 300CD - winmutt - 10-25-2010
89 300d?
RE: 5 Spd for 89 300D in a 300CD - Oil Burner - 10-25-2010
(10-25-2010, 11:08 AM)winmutt 89 300d?
Meant 1980 300CD