+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM617 STT Turbo Manifolds on Ebay (/showthread.php?tid=2729)
OM617 STT Turbo Manifolds on Ebay - Merlot - 06-20-2011
Hi,
I have found some STT Turbo Inlet and Exhaust Manifolds and have listed them on Ebay, They apparently fit straight on the OM 617 Engine – I have cleaned them up and given them a lick of paint for purely cosmetic reasons. I am putting a posting on this forum as this is where I gleaned the information regarding it’s application. Please note the items in the picture on the listing are ALL the parts that I have .
STT Turbo Manifold Listing
I hope you don't mind me posting them on here but this site has the most recent comprehensive info on them.
Regards Merlot
Where can I get some of that "Saved up Money" ?
RE: OM617 STT Turbo Manifolds on Ebay - aaa - 06-20-2011
Post the pics here so they don't disappear in six months.
RE: OM617 STT Turbo Manifolds on Ebay - randomdude - 06-22-2011
are these supposed to be "performance" manifolds? or just stock replacements?
RE: OM617 STT Turbo Manifolds on Ebay - BRABUS - 06-22-2011
They are meant for turbocharging cars with NA engine...
RE: OM617 STT Turbo Manifolds on Ebay - MTUPower - 06-22-2011
Those are preturbo intake runners from a NA engine copied and made in Sweden. Note the part which sits on top of the intake- that is not a stock part however. These longer runners are a better intake for a modified 617-95X than the stock turbo intake but take much more plumbing.
RE: OM617 STT Turbo Manifolds on Ebay - led-panzer - 06-22-2011
That exaust manifold is beatiful and nice and big, I would buy them just for that if I had the money.
RE: OM617 STT Turbo Manifolds on Ebay - randomdude - 06-23-2011
so it would boost performance on my OM617? or would i be better doing a log mani?
RE: OM617 STT Turbo Manifolds on Ebay - Biohazard - 06-23-2011
Havent seen one in person, but it looks a LOT like the non-egr manifold. I think, from eyeballing this thing, that it actually mounts a turbo slightly lower than the stock manifold does. I've tried to mount the non-turbo 300d intake to a turbo 300d, and the intake hits the turbocharger. Looks like the STT turbo manifold MIGHT lower the turbo just enough to clear the manifold. Or, I'm completely wrong, but thats happened before. HAHA! For the money, I'd look for a non-egr manifold. With a stock turbo, it will still spool just fine, but will flow slightly better at higher rpm. This combo would probably still spool nicely, and might even have better flow / power potential at higher rpm. Just for the record, I'm also building a log manifold for my dads car to mount a GT22V.
Edit: Making a log manifold to mount a GT22V and the long runner non-turbo 300D manifold; the flat style like in the pictures for the ebay listing. That intake won't clear a turbo with the factory exh manifold. The ebay listing above is freaking sweet, I wish I had the money and need for it!!
RE: OM617 STT Turbo Manifolds on Ebay - HughF_UK - 06-29-2011
I had an STT turbo'd w123 a few years ago, some pics on my picasaweb account...