+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: WTB: 8mm M or MW pump (6 cylinder) (/showthread.php?tid=2869)
WTB: 8mm M or MW pump (6 cylinder) - HoleshotHolset - 08-15-2011
I have an M pump off an OM603 that needs a rebuild/once over and then I would like to have 8mm elements installed, pump output balanced, governor tweaked to 6500, maybe 7000, etc.
Please get in touch via email if you have one already done up - or know of a place (other than Myna) that can rebuild mine!
I have nothing at all against Myna - just looking for other options, hopefully here in the US. In the end, I still might go the Myna route - just doing my homework now.
Regards,
Matt
RE: WTB: 8mm M or MW pump (6 cylinder) - winmutt - 08-17-2011
Dieselmeken is a possible. As is PPD (I think they are different). Nobody has found anyone state side.
RE: WTB: 8mm M or MW pump (6 cylinder) - HoleshotHolset - 08-18-2011
(08-17-2011, 02:40 PM)winmutt Dieselmeken is a possible. As is PPD (I think they are different). Nobody has found anyone state side.
I've been in contact with Dieselmeken - he is a strong possibility.
What's odd is that we have our fair share of tractor pulling and other assorted diesel motorsports here in the USA, but the M/MW pumps are somehow a mystery.
Beers,
Matt