+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: CDI injectors (/showthread.php?tid=3163)
CDI injectors - diesel2fast4u - 11-30-2011
Anyone know if the newer piezo's from an OM642 (V6CDI) would mechanicly fit into an OM648 (6 inline)
I know it will not be plug & play but I need more fuel
thanks
RE: CDI injectors - majesty78 - 12-01-2011
Why not use AMG C30 CDI Injectors and pump?
RE: CDI injectors - Volker407 - 12-01-2011
No, they don´t fit mechanicly, hydraulically or electrically
Gruß
Volker
RE: CDI injectors - whipplem104 - 12-01-2011
They would probably fit but the cdi module will not run them. Piezo and solenoid injectors drive really differently. You can get larger injectors from bosch directly. Bosch motorsports. You will have to find a dealer in your area. They are hard to deal with for sure. Mostly racing teams.
RE: CDI injectors - diesel2fast4u - 12-01-2011
@ Majesty78, expensive, hard to find & still to small
@ Whipplem104 , I also think they fit, We are running a standalone computer that can handle piezo and they are very big & easy to find from crashed cars
RE: CDI injectors - majesty78 - 12-01-2011
What power are you aiming for?
RE: CDI injectors - diesel2fast4u - 12-01-2011
(12-01-2011, 12:39 PM)majesty78 What power are you aiming for?
400HP
For this, I have a budget but not unlimited, so the bosch motorsport way is kind of a no go...
RE: CDI injectors - majesty78 - 12-02-2011
Above mentioned C30CDI AMG injectors plus pump from E400CDI and rail pressure sensor is fine for 400hp....
You can get your current injectors rebuilt to the 7hole AMG nozzle tips and specs, should not be to costy...
RE: CDI injectors - diesel2fast4u - 12-02-2011
(12-02-2011, 02:51 AM)majesty78 Above mentioned C30CDI AMG injectors plus pump from E400CDI and rail pressure sensor is fine for 400hp....
You can get your current injectors rebuilt to the 7hole AMG nozzle tips and specs, should not be to costy...
Nozzles are around 300 for 6 but where to find the specs?
RE: CDI injectors - whipplem104 - 12-02-2011
Just curious, which standalone system are you using? I have been looking at Bosch and a few of the others.
RE: CDI injectors - diesel2fast4u - 12-02-2011
(12-02-2011, 09:11 AM)whipplem104 Just curious, which standalone system are you using? I have been looking at Bosch and a few of the others.
Pm me your email adress and I will send you the info.
It's a system that was develloped here in Belgium
Can control piezo, inductive and pump injectors, up to 3 turbo's ....