Dieselmekens -96 C250td project - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19) +--- Forum: Projects (https://www.superturbodiesel.com/std/forumdisplay.php?fid=14) +--- Thread: Dieselmekens -96 C250td project (/showthread.php?tid=3167) |
Dieselmekens -96 C250td project - dieselmeken - 12-05-2011 After Mantaheads Challange, I was thinking, Why not build a OM605 that is a little stronger than his? After some thinking and planning of the winter, I bought this -96 C250td. It´s a automatic , 350000 km of running. It came with a lot of faults, I payed 1000 euro for it. The problems where ( are ) Engine wont start, No big deal for me, after 1 hour it runs BUT Only on 4 cylinders on low idle when hot, On load it works OK No big deal for me, som nonauthorized has been into the pump. Fan / Clima dont work, a nice short circuit in the electrical system, #12 fuse blows alla the time. No big deal for me, I use the short circuit to lead me to the fault. It was the clima ECU that was wrong. 2 hours there and a used one from the scrapyard for 50 euro. Some rats or mouse had a house in the airfilterbox, also the have been eating the wire to the diagnostic, that is fixed now. The car cant be locked, no vaccum in the system, also then the turbo dont charge, No big deal that either. Working on it. Front right wheelbearing is worn out, new one is ordered. The plan is to get the car in order, fix it and get it to pass the swedish vehicle inspection and after that take it to pieces. RE: Dieslmekens -96 C250td project - George3soccer - 12-05-2011 Sounds like a fun project. Keep us updated with everything. RE: Dieselmekens -96 C250td project - iheartboost - 12-05-2011 Haha. Man I wish I could just say "ya know.. I wanna out build this guy for the hell of it" This should be awesome though! RE: Dieselmekens -96 C250td project - DeliveryValve - 12-05-2011 Nice! I wish we could get one of those over here! . RE: Dieselmekens -96 C250td project - willbhere4u - 12-05-2011 It's very nice looking car I like the wheels! RE: Dieselmekens -96 C250td project - Captain America - 12-06-2011 I see this E350? driving to work every once in a while. Need to see if the guy wants to sell! RE: Dieselmekens -96 C250td project - 0815 - 01-09-2013 bump, any news??? would be nice to hear from the project. RE: Dieselmekens -96 C250td project - dieselmeken - 01-10-2013 Engine was tested with 7,5mm superpump, worked fine, but I put the EDC pump back and sold the car, Didn´t have time for it. |