STD
606 IP - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: 606 IP (/showthread.php?tid=353)



606 IP - MB TECH - 05-07-2009

Without doing any research I thought I would throw this out there, is it possible to run a 606 IP on a 617 motor? If so is it worth it?
Ya nevermind, I had a brainfart, 606 pump is a 6cyl. Anyone out there need a pump for a 606?


RE: 606 IP - ForcedInduction - 05-07-2009

No. 606 is 6 cylinders, 617 is 5.


RE: 606 IP - MB TECH - 05-07-2009

ya I realized that about 5 seconds after hitting post (the lower part of my message)


RE: 606 IP - ForcedInduction - 05-07-2009

(05-07-2009, 03:32 PM)MB TECH ya I realized that about 5 seconds after hitting post (the lower part of my message)

Ah, I see. Wink If the pump is from a turbo engine it should have 6mm plungers that 617 users with an m-pump can rebuild theirs with.


RE: 606 IP - MB TECH - 05-07-2009

It is out of a turbo motor, so your saying I can transfer the plungers into my IP on my 617


RE: 606 IP - ForcedInduction - 05-07-2009

If it has the M-pump from a non-turbo euro engine, yes. If it has the MW-pump US models came with, no.


RE: 606 IP - oel_brenner - 05-07-2009

(05-07-2009, 02:45 PM)MB TECH Ya nevermind, I had a brainfart, 606 pump is a 6cyl. Anyone out there need a pump for a 606?

does it work ?
came out of turbo 606 or NA ?
how much you want for it ?

I might want it to put it on the shelf for some future CANbus experimenting


RE: 606 IP - MB TECH - 05-08-2009

It does not supply fuel on cyl. 3, could be something simple not sure though. One of my co workers was cleaning out his toolbox and he gave it to me (told me the car had a miss on cyl 3) other than that it is in good shape. Not really sure what its worth or what I might do with it. Let me know what you think it is worth and we can go from there.


RE: 606 IP - ForcedInduction - 05-27-2009

Do you still have the pump? I'd like to buy it.