+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: MW pump not fueling port #1 (/showthread.php?tid=3591)
MW pump not fueling port #1 - moon161 - 04-30-2012
80's OM616 Engine on a stand, been sitting 2 years. Fueled, primed, turned over w/ wrench. Ports 2-4 put out fuel, not so for port#1.
Can swap like pump over from the engine it's replacing if need be.
Any ideas?
Thanks,
RE: MW pump not fueling port #1 - aaa - 05-01-2012
I'd say you'd need to run it to get the air out. Not unusual for one of the ports to lag behind.
RE: MW pump not fueling port #1 - moon161 - 05-01-2012
On the nose, cut D2 w/ acetone, made sure the intake hose was wet, primed again, seems OK. I'll try and get it running on the weekend.