+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: WTB: TURBO (/showthread.php?tid=3660)
WTB: TURBO - Greazzer - 05-18-2012
Howdy Everyone,
It has been a while since I contributed or commented. Hopefully, I will be able to share some pictures and updates on the Phoenix Project and some other projects. It's been a very tough last few months.
I am looking for a ready to install Turbo for OM617.952 engine that will have a mod "M" pump with 6mm elements. As posted in other spots, I am looking for something that will get the old girl up and running really fast but I am too chicken to go over 80-90 mph. The car will have the venerable 5 speed GETRAG 717.400 (I think - might need a partial rebuild, not sure now). So, you know the engine I got, you know the pump I got, and most likely the transmission I got. I got a M+W system which will kick in either because of PSI or manual control. Not sure which may I am headed on this. I want the water more for cleaning than anything else.
Any one out there with a nice, used Turbo that fits the bill? I want something that works now and is rebuildable and is ready to install without a ton of R&D. So, if that means I need plates, et cet., please let me know and please let me know if you have them. I have a spare exhaust manifold I can chop up. In other words, if I get it in the mail on a weekday, I want to be able to install it over the weekend and drive to work on Monday.
Thanks,
Greazzer
Columbia, SC