300SDL Manual drive shaft - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6) +--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9) +--- Thread: 300SDL Manual drive shaft (/showthread.php?tid=3723) |
300SDL Manual drive shaft - W126Lover - 06-12-2012 I have a 5 speed manual transmission that i got from a 190e 2.6. I bolts right up to my OM603 but the drive shaft from the auto is too short and i cant find any drive shafts for a manual w126 in US. Does anyone know where i can find a drive shaft that will work? I really need one! Thanks RE: 300SDL Manual drive shaft - aaa - 06-12-2012 I imagine you'd have to modify one. How long is your auto shaft? It's a long shot but maybe a w124 shaft works or would be easier to modify. RE: 300SDL Manual drive shaft - Kozuka - 06-12-2012 There is a stock 5-speed 300e that driveshaft would be the right size but your better off measuring and taking your auto driveshaft to be modified at a driveshaft shop. Where it can be balanced and you can properly install it and it will be a hell of alot cheaper and easier then tracking down a rare piece. I have a feeling that the driveshaft flex plates are different auto to manual in W201/W124. RE: 300SDL Manual drive shaft - willbhere4u - 06-12-2012 I would be surprised if the w124 drive shaft would fit a w126 long wheel base? I was going to have mine modified when I get my 6spd in my 87 300sdl RE: 300SDL Manual drive shaft - aaa - 06-13-2012 Ah the long wheelbase, that guarantees having to lengthen it huh. |