+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: Idea tranny for om606 (/showthread.php?tid=3794)
Idea tranny for om606 - serverman777 - 07-16-2012
Last few weeks I been trying to get a plan together on how I will be getting my 606 into a w123/126. With a pic-a-part close at hand and with store credit (from buying a bad trans for my 190e) I feel like I could get something up there that came out of a mercedes for my 606 project. What would be a good idea for a auto 722.xxx trans for my case? IE bell housing bolts up to the block type deal. I understand that a custom length shaft is in order.
RE: Idea tranny for om606 - Spaceraver - 07-19-2012
If you want a 722.6 transmission, get the 580 version. good for up to 580 Nm.. Then either the PCS TCM-2000 controller from http://www.soundgermanautomotive.com/ or a custom setup like Olefejer's.
The bellhousing should fit to any OM60x engine. Dunno about the 617 and so on.
RE: Idea tranny for om606 - Nielsychop - 07-25-2012
Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?
Edit: Found it, it's all 722.6 boxes
RE: Idea tranny for om606 - raudmees - 07-30-2012
(07-25-2012, 09:08 AM)Nielsychop Sorry if this has been answered elsewhere, but how do you know if a 722.6 is 580NM proof? or is it all 722.6 boxes?
Edit: Found it, it's all 722.6 boxes
Where did you find this info?
I understood that just some boxes can handle 580NM and it is the boxes from v8
and stronger diesels.