+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: Anybody parting a 300D 2.5 <edit> or 124 E300 D? (/showthread.php?tid=4435)
Anybody parting a 300D 2.5 <edit> or 124 E300 D? - Duckmang - 03-21-2013
I'm itching to get the right front fender off one. I have a gasser TE that I've turbocharged and I'm using the factory 86-87 300D airbox and heatshield. The vented fender would finish it off nicely.
I'd take any color but white would be ideal....
RE: Anybody parting a 300D 2.5 ? - willbhere4u - 03-21-2013
I would check car-part.com the 86-87 300d 3.0 should be the same
RE: Anybody parting a 300D 2.5 ? - Duckmang - 03-21-2013
If only it were that simple, the early ones didn't get the vented fender. OTOH, the late 124 E300 diesels also got the vents, but I figure them to be even rare-er than the 2.5s.
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - Kozuka - 03-22-2013
In W201/W124 land they are pretty sought after & rare (vented fender that is off of the turbo diesel models) so you will have difficulty finding one.
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - willbhere4u - 03-22-2013
Every turbo diesel w124 I have seen had them Evan the 87 I worked on had it
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - aaa - 03-22-2013
The 87 w124 turbo did not have the vents.
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - TheDon - 03-25-2013
I have one for my car and I am pissed the last vented fender I saw I didn't grab. They crushed the car before I could get it the next time. If I come across another vented fender ill nab it.
The US spec '87 300D did not get the vented fender only the 92's and E300's
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - willbhere4u - 03-26-2013
Maybe it was added to the car we worked on
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - Duckmang - 04-19-2013
Found one, finally.
RE: Anybody parting a 300D 2.5 <edit> or 124 E300 D? - willbhere4u - 04-19-2013
Here is an 1987 190d?
http://denver.craigslist.org/cto/3729692144.html