STD
722.636 into w201 - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: 722.636 into w201 (/showthread.php?tid=4570)



722.636 into w201 - Eric78 - 05-11-2013

Will fitting this transmission into a w201 require cutting the transmission tunnel or fabricating special mounts?


RE: 722.636 into w201 - Eric78 - 05-17-2013

So will this go in to a w201 trans tunnel wihout cutting? It'll be delivered soon so I guess I'll find out for myself soon enough.


RE: 722.636 into w201 - whipplem104 - 05-18-2013

There are quite a few in the w201 chassis in europe and I have not heard that they had to cut anything. I bet it is tight though.


RE: 722.636 into w201 - TurboWalt - 05-18-2013

Eric,

Do post your results. I want to use one behind my OM602 in my W201. If the 722.6 fits it will open the door to a OM605 swap!

Walt


RE: 722.636 into w201 - SuperCow - 05-20-2013

I am also very interested in this.
I have heard you have to cut the tunnel.