+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM603 (/showthread.php?tid=473)
OM603 - Motorhead - 07-02-2009
What is the valve stem dia., length and face dia. for both the intake and exhaust valves of the OM603 engine, also what is the cylinder bore? This may be a doner valve for the OM617 engine, I won't know until I get my fingers and eye's in the ports. If I can't find a bigger valve from the 603 or any other engine we can always work the troat and valve to pick up some flow #'s, I don't want to take too much margin away but as robust as Mercedes are there is probably somthing left on the plate.
RE: OM603 - Motorhead - 07-03-2009
Does anyone know what chassis the 603 came in, let me know and I will buy an manual.
RE: OM603 - ForcedInduction - 07-03-2009
W124, W126 (1986+) and W140.
RE: OM603 - Motorhead - 07-04-2009
(07-03-2009, 08:41 PM)ForcedInduction W124, W126 (1986+) and W140.Thank's!