+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: WTB- Patch panels (/showthread.php?tid=4873)
WTB- Patch panels - JB3 - 09-04-2013
Im looking for rear wheel arches, and in the front of the passenger rear wheel down to the rocker panel patch pieces from a non rusted 123 chassis vehicle.
If you have a parts car and would be interested in sawzalling this stuff out for me, please let me know!
RE: WTB- Patch panels - Greazzer - 09-04-2013
Just go to http://www.klokkerholmusa.com/servlet/the-189/1976-dsh-1985-mercedes-w123-4/Detail and buy new. Less than $50 bucks you cheapo
RE: WTB- Patch panels - JB3 - 09-04-2013
lol
I wasn't even aware these panels were available, but the same statement was made over on PP and I was clued in. I've ordered the same patch panels through "lake erie trading post" but they are klokkerholm.
Even cheaper.
hopefully quality is ok, stretch over on PP was really pissed at the quality of the floor pans he got from klokkerholm. Some pretty nasty pictures
RE: WTB- Patch panels - Greazzer - 09-04-2013
Wowza ... I only heard rave reviews over Klokkerholm products. I hope you get the batch NOT made on payday Friday. I guess Army got the left overs or end runs of a batch. Pictures please when you get them !
RE: WTB- Patch panels - Purplecomputer - 09-05-2013
Thanks guys, You led me to a website where I can buy stuff to repair my car from the accident!
RE: WTB- Patch panels - JB3 - 09-10-2013
and they arrived!
![[Image: 002_zpsc369b1f4.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/002_zpsc369b1f4.jpg.html)
padding was minimal unfortunately-
![[Image: 0012_zps1d8c0b9e.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/0012_zps1d8c0b9e.jpg.html)
there are some slight weird areas, including what looks like a mistaken spot weld-
![[Image: 003_zps9919e906.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/003_zps9919e906.jpg.html)
the rear of the fender was damaged by the poor packing and rolled in a bit-
![[Image: 0042_zps732afa70.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/0042_zps732afa70.jpg.html)
just about half the thickness of the stock material-
![[Image: 005_zps9ef62dd8.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/005_zps9ef62dd8.jpg.html)
but honestly, not that bad. Body line definition is pretty close, they should make good source panels, the arches look identical, only slightly less sharp than stock on the lines-
![[Image: 006_zpsfb763fb2.jpg]](http://s1217.photobucket.com/user/tinworm2/media/Trishes240/006_zpsfb763fb2.jpg.html)
Looking forward to seeing what the body guy has to say about them