Exhaust flange OM606/5/4 - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19) +--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8) +--- Thread: Exhaust flange OM606/5/4 (/showthread.php?tid=4991) |
Exhaust flange OM606/5/4 - dieselmeken - 10-08-2013 CNC Made in Sweden , 220USD + shipping cost Topic in wrong section, Admin please move to buy & sell / Dieselmeken RE: Exhaust flange OM606/5/4 - Simpler=Better - 10-08-2013 $220 is cheap for machining like that RE: Exhaust flange OM606/5/4 - hansendk - 10-08-2013 I would like to know the price for us who lives in side EU either in euro or SV. kronor and is it the same price for all both 4 ,5 and 6 cylinder just got a 605.962, I can machine 1 myself both not on CNC, so it take a lot of time but the problem with EU is the vat. Hansen RE: Exhaust flange OM606/5/4 - dieselmeken - 10-09-2013 (10-08-2013, 09:02 AM)hansendk I would like to know the price for us who lives in side EU either in euro or SV. kronor and is it the same price for all both 4 ,5 and 6 cylinder1500 SEK + moms RE: Exhaust flange OM606/5/4 - Matej - 06-20-2015 Bump from the dead. Would it be possible to order this without the machined grooves around the round outlets? I want to use this as a conversion flange to adapt an OM603 manifold on the OM606. Or could you just produce a conversion flange for the OM606 that already has the OM603 threaded bolt pattern on it as well? |